• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.22-27
• /
• 2009

Target design study to improve the quality of an accelerated proton beam from the interaction of a high-intensity short pulse laser with an overdense plasma slab has been accomplished by using a two-dimensional, fully electromagnetic and relativistic particle-in-cell (PIC) simulation. The target consists of a thin core part and a thick peripheral part of equivalent plasma densities, while the ratio of the radius of the core part to the laser spot size, and the position of the peripheral part relative to the fixed core part were varied. The positive effects of this core-peripheral target structure could be expected from the knowledge of the typical target normal sheath acceleration (TNSA) mechanism in a laser-plasma interaction, and were apparently evidenced from the comparison with the case of a conventional simple planar target and the case of the transversal size reduction of the simple planar target. Improvements of the beam qualities including the collimation, the forward directionality, and the beam divergence were verified by detailed analysis of relativistic momentum, angular directionality, and the spatial density map of the accelerated protons.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.195-197
• /
• 1993

In this paper, a planar vibratory gyroscope is designed and fabricated in macro model. Elementary experiment and test are done for micro model. This gyroscope has a double gimbal structure with an active dimension $80{\times}120{\times}1\;mm^3$. Outer gimbal vibration is generated by electromagnetic force using ferrite E-core wounded by coil. Inner gimbal vibration is detected by inductive sensor. It is demonstrated' that mechanical and electrical symmetries are important for improvement of vibratory gyroscope.

• 한국자기학회지
• /
• 제12권3호
• /
• pp.109-116
• /
• 2002

평면변압기의 설계방법 확립과 응용가능성을 파악하기 위해 입/출력전압이 70V/8.2V인 8W급 플라이-백 평면변압기를 설계하였다. 스위칭 주파수 120kHz에서 인덕턴스는 1650 $\mu$H로서 이론치의 약 85%~87%인 인덕턴스 효율을 나타내었고, 도전체의 교류저항은 주파수가 증가할수록 증가하여 스위칭파수 120 kHz에서 1차/2차 코일의 교류저항이 각각 3.9 $\Omega$, 0.16 $\Omega$이었고, 성능지수는 각각 158, 75로 나타났으며, 결합인자 k값은 스위칭 주파수 120 kHz에서 0.96~0.97 범위의 값을 나타내었다. 또한 자성체의 평면부분의 두께가 1.4mm까지는 인덕턴스가 평면두께가 증가할수록 큰 폭으로 증가하였고, 1.4mm이상의 두께에서는 거의 일정한 값을 나타내어 자성체의 임계 평면두께는 1.4mm로 나타났다. 그리고 70V의 입력 전압에 대하여 안정한 구형파의 출력 파형을 나타내었다.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.524-529
• /
• 2000

Silica slab wavegudie was fabricated on Si substrates by FHD for planar optical passive devices. The slab waveguide consists of lower clad and core layers, where core layer index is controlled by GeO2 addition. Doping of GeO2 in silica is difficult because of the low deposition density due to nonspherical particle generation in FHD process. Silica core particles deposited at various conditions such as flame temperature and substrate scanning were analyzed by SEM and TEM. As the flame temperature increased, the surface roughness of the core layer was decreased up to 3.6 nm after consolidation. Index difference and thickness of core of slab waveguide were 0.3%, 8$\mu\textrm{m}$ respectively. Measured optical loss at TE mode was <0.04 dB/cm at 1.3$\mu\textrm{m}$ and <0.06 dB/cm at 1.55$\mu\textrm{m}$.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.813-818
• /
• 1997

In this study the thin film air core and magnetic core inductors consisting of planar coil and/or CoNbZr amorphous magnetic layers on a Si substrate were fabricated as spiral type by using rf magnetron sputtering and wet etching methods. The etchant solution was achieved by iron chloride solution(17.5 mol%) mixed with HF (20 mol%) during 150 sec which etched Cu films and CoNbZr/Cu/CoNbZr multi-layer films. They were about 10${\mu}{\textrm}{m}$ of thickness and 10$\times$10 mm$^2$of size. The properties of thin film magnetic core inductor were 400 nH of Q value at 10 MHz and the resonance frequency was about 300 MHz.

• 한국광학회지
• /
• 제15권1호
• /
• pp.28-33
• /
• 2004

상부 도파로와 중간 결합층이 적층된 단일모드 광섬유를 기본구조로 하는 측면 연마 광섬유 결합기를 상호 광 결합이 일어나는 영역을 다층막 도파로로 등가화하여 결합 효율을 해석하였다. 다층막 구조에서 중간 결합층의 유무에 따른 반사도를 계산하여 상부 도파로의 굴절률의 함수로 도시하였고, 상부 도파로의 굴절률이 광섬유 코어의 굴절률보다 클 경우 중간 결합층의 조건에 의해서 광 결합이 증가되어짐을 보였다. 리튬나오베이트를 상부 도파로로 가지는 결합기의 실험결과를 톤해 이론적 해석의 타당함을 보였고 계산 결과와 일치함을 보였다.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.379-384
• /
• 1992

The Fe-base amorphous ribbons with 15mm width and about 20x10S0-6Tm thickness, (FeS179-xTCrS1xT)BS116TSiS15T and (FeS181-xTMnS1xT) BS112TSiS17T (x:0-6), were prepared melt spinner. The thickness of the ribbons followed by PFC (Planar Flow Casting). The initial permeability and total core losses were measured as a function of additive elements (Cr, Mn) and annealing conditions in high frequency for the purpose of using these materials as a core of magnetic amplifier and switched mode power supplies. The initial permeabilities were enhanced and core losses were decreased by non-magnetic field annealing in proper conditions. The lowest core loss in 0.2T/10kHz was measured at 3% Cr addition amorphous ribbon, and the loss was 5.6W/kg. The permeability of the ribbon at 10kHz was about 9000.

• 한국자기학회지
• /
• 제25권1호
• /
• pp.4-9
• /
• 2015

본 연구는 PFC(Planar Flow Casting)프로세스에 의한 Fe기 $Fe_{78}Si_9B_{13}$ 비정질 합금리본 제조에 있어서 습도변화(55~85 %)가 비정질 합금리본의 표면결함 및 자기적 특성에 미치는 영향을 조사하였다. 그 결과, 비정질 합금리본의 접촉면과 자유면에서 관찰된 air pocket/droplet의 크기는 습도가 증가할수록 커지는 경향을 보임과 동시에 표면조도과 함께 크게 증가하였으며, 특히 습도 65 %에서 제조한 표면조도 값이 접촉면($Ra=0.60{\mu}m$, $Rz=3.11{\mu}m$)과 자유면($Ra=0.47{\mu}m$, $Rz=3.00{\mu}m$)에서 모두 가장 낮은 값이 얻어졌다. 또한 $23(OD)^*20(ID)^*20(H)$ 크기의 토로이달 코어로 제조된 자성코어의 연자기적 특성의 경우에도 65 %에서 제조한 비정질 합금리본의 시료에서 $B_s(B_{700})=1.055T$, $H_c=0.083Oe$, 투자율 = 1,197 및 core loss = 0.276 W/kg로 가장 우수한 값이 얻어졌다.

• 한국통신학회논문지
• /
• 제17권9호
• /
• pp.918-926
• /
• 1992

본 논문에서는 이동 통신용 소형 무선기기에 사용가능한 소형 Ferrite-core Loop 안테나를 설계 제작하고 그 특성을 고찰하였다. 안테나는 $10{\times}6{\times}15mm^3$의 크기를 갖는 loop 안테나 내부에 Ferrite core를 삽입하여 제작하였고 제작된 안테나는 $50\Omega$ 정합시 대역폭 (SWR 1.5이하)은 0.55 MHz, Q값은 280으로 동일 크기를 갖는 Loop 안테나 (BW=1.9 MHz, Q=81.4)에 비해 주파수 선택 특성이 우수하였다. 8 방향 방사특성시험 및 TEM Cell을 이용한 수신특성시험에서도 기존의 loop안테나에 비해 11dB이상 이득이 증가됨을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.223-223
• /
• 2009

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar type optical waveguide devices (which is called here a PS-MZI). The PS-MZI optical waveguide sensor was preceded by a Y-junction, which splits the input power between the sensor, and a reference branch, to minimize the effect of optical power variations. The PS-MZI optical waveguide sensor induced changing phases of the incident beam, which had fallen upon the waveguide through computer simulation, according to the small changes in the index of refraction, thus beam intensity was changed. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguide sensor was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguide that was fabricated to be applied as a biosensor revealed a low insertion loss and a low polarization-dependent loss. After having etched the over-clad at the sensor part in the MZI optical waveguide that was fabricated, Ti deposition was made on the adhesion layer, and then Au thin-film deposition was carried out thereon. In addition, its optical properties were measured by having changed the index of refraction oil at the sensing part of the MZI. To apply the planar type PS-MZI optical waveguide as a biosensor, a detection test for Staphylococcus aureus was conducted according to changes in concentration, having adopted Ti-alkoxide as ligand. The detection result of the S. aureus by the PS-MZI optical waveguide sensor was possible to the level of $10^1$ CFU/ml.