• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.

• Journal of Environmental Science International
• /
• v.18 no.1
• /
• pp.99-111
• /
• 2009

In this study vegetation structure was monitored focusing on slanting surface of stream for the purpose of developing a management plan and ecological restoration of small stream in Paju. The study was conducted by types of geographical structure, yearly flora, naturalization rate changes, actual vegetation changes, plant community changes. Slope area of small stream in Paju was varied in the slope range of $10{\sim}35^{\circ}$. The survey results of yearly flora showed that 37 species appeared in 2000, 55 species in 2001, 95 species in 2002, and 125 species in 2003. Therefore, the trend of continuous increase of flora each year was observed. In the case of yearly changes of actual vegetation, indigenous wetland herb community including Phragmites communis$(19.99%{\rightarrow}18.42%{\rightarrow}19.60%)$ did not show substantial changes in the area, while the influence of controlled flora such as Humulus scandens$(8.86%{\rightarrow}5.26%{\rightarrow}9.73%)$, and Ambrosia artemisiifolia$(1.06%{\rightarrow}1.43%{\rightarrow}6.93%)$ were increased. The vegetation structure investigated by 18 preset belt-transects also indicated that Phragmites communis and Miscanthus sacchariflorus were maintaining the status or decreasing the population, while the population of Humulus scandens, Ambrosia artemisiifolia, Setaria viridis, and Erigeron canadensis were greatly increased. Our proposal management to restore ecology is as follows: first, preservation and restoration of Phragmites communis landscape; second, restoration of potential stream vegetation community; third, selection and removal of controlled plants.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.162-164
• /
• 2004

Odontogenic keratocysts are developmental odontogenic cysts which derived from rests of dental laminas and often found in posterior area of mandible. Because this lesion has tendency of frequent recurrence, treatment of choice is often radical removal of the lesion. Sometimes in case of large cysts, however, conservative therapy like marsupialization is often selected in treatment plan. A 39-years old woman referred to our department for evaluation of large radiolucent lesion that occupies the areas from mandible angle to upper part of ramus and condyle. In cytology, the lesion was identified as odontogenic keratocyst. Marsupialization was our treatment of choice, and the result was so favorable. 2 years later, there was small radiolucent lesion on upper part of mandibular ramus on panoramic view. It was suspected as recurred lesion, and excisional biopsy was done. On biopsy result, it was not a cystic lesion but fibrosis.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.3 no.2
• /
• pp.104-115
• /
• 2008

Purpose: A study of the family planning and Maternal-Child Health Services that disciplined itself in primary health care post form 1980 to 2009. Method: Investigation studies family planning in primary health care post and a change process of a Maternal-Child Health Services into case by case until 2009 from 1980. Results: Our country family planning business began at economic development dimensions in order to solve a poverty issue. This business goal were childbirth decrease of pregnancy possibility couple aged 19~49 and improve to mother and child health. For this goal, all kinds of health education included sex education and contraception education, contraception service, comprehensive maternal and child health service that management of front and back of childbirth etc. are provided. According to fail down a birthrate from 6.0(1962) to 1.25(2009), the nation reached to a dilemma called childbirth encouragement policy. Conclusions: Decrease of labor supply by low birthrate, decrease numerical an employed person by aging was brought a labor shortage and decrease of productivity of labor of industrial manpower. Deterioration phenomenon of financial income and expenditure by consumption and investment contraction caused decrease of slowdown of economic growth and potential growth rate, and a social cost burden is increased by deterioration financial old man support burden increase by this and pensions and health insurance, a sharp increase of social welfare cost etc. Now, in order to solve a low birth issue, the government establishes a whole nation forwarding system and establishes basic plan social low birth and advanced age, and to prepare for childbirth fault factors removal and advanced age society shall endeavor.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.144-154
• /
• 2019

The flora of naturalized plants in historic sites, urban parks and stream of Gyeongju-si, South Korea were summarized as 84 taxa including 21 families, 59 genera, 78 species, 1 subspecies, and 5 varieties. Direct investigation was conducted in a historic site with 68 taxa, a neighborhood park with 43 taxa, a stream with 59 taxa and a small park with 42 taxa at 86 sites. Among them, 31.0% (Naturalized Degree (ND) 3) was common but not abundant, 29.8% (ND 5) was common and an abundant plant, 20.2% (ND 2) was local and not an abundant plant. 7 taxa such as Lactuca scariola, Symphyotrichum pilosum, Rumex acetosella were invasive alien species. Lactuca scariola was the most abundant with 41.9%, Symphyotrichum pilosum was more abundant around stream with 34.9%, and Rumex acetosella was abundant on historic sites or small park with 25.6% in all the surveyed sites. To prevent spread of invasive alien species, monitoring may be required, especially, in early settlement stage. A proper management plan needs to be incorporated through physical removal of those plants, substitution of soil and so on.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.87-88
• /
• 2019

Leading Lights and Sector Lights provide a navigable channel, heading reference and a visual indication. Mariners can take easily a reference bearing or line of position. The Busan North Port needed to install a sector light to resolve blind sections because of Busan Port Redevelopment Project D-1 Block Construction Plan. And also the busan new port needed to install a sector light to give safety indication because navigation conditions will be changed due to removal of the to-island. For this reason, design development was made for installation of sector lights. In addition, the results of design development were compared with the AtoN simulation and verified. This paper is expected to be very useful for installing Sector Lights to guide the vessel to port safely in Korea.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.197-203
• /
• 2020

BACKGROUND: Most lakes have increased concerns about water pollution due to the inflow of non-point sources caused by human activities. Therefore, the lake water quality survey was conducted in order to propose effective plans for water quality management by analyzing the characteristics of lakes and the change of water quality. METHODS AND RESULTS: In order to investigate the physicochemical water quality in Daedong lake, water quality analysis was undertaken from July 2018 to June 2019. Water temperature was ranged from 7.8 to 34.3℃ and pH varied from 6.9 to 10.2. The concentration of Dissolved oxygen, Suspended solid, Biochemical Oxygen Demand (BOD), and Chemical Oxygen Demand (COD) were 5.6 ~ 17.2 mg/L, 2.4 ~ 35.3 mg/L, and 4.5 ~ 15.1 mg/L, and 0.9 ~ 2.8 mg/L, respectively. The Total Nitrogen (T-N) concentration ranged from 0.974 ~ 2.126 mg/L, and Total Phosphorus (T-P) concentration ranged from 0.014 ~ 0.057 mg/L. The Chlorophyll-a (Chl-a) ranged from 2.7 ~ 37.9 mg/㎥. Through Carlson TSIm assessment using T-P and Chl-a results, evaluating trophic state, Daedong lake was evaluated as mesotrophic. CONCLUSION: Water pollution management plan needs such as nutrient removal technology and nonpoint source management for prevention of eutrophication in Daedong lake.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.6
• /
• pp.539-546
• /
• 2002

The physicochemical properties of solid wastes generated from seven highway service areas, four branch offices, and one construction site were analyzed in concert with air pollutants including heavy metals emitted from near-by small-scale incinerators. The amount of solid wastes generated from highway areas has been increasing with recent increases in the number of highways and passengers. Twelve incinerators examined in this study generally had capacity smaller than 100 kg/hr, most of which were equipped with cyclone for dust removal. It was seen that the concentrations of the gas-phase air pollutants (e.g., SO$_2$, NO$_{x}$, HCl and H$_2$S) were above the acceptable emission standards except one or two sites. CO concentrations at all incinerators were also higher due to incomplete combustion. In addition, particulate matters showed concentration six times higher at their maximum. The results of heavy metal analysis showed that the concentrations of Cu, Cd, and Ni satisfied the emission standards. whereas Pb at one site and Zn at five sites exceeded the standards. Cr measurement results indicated that 9 of 12 incinerators had higher values than the standard; especially one branch office showed nine times higher than normal concentration. In order to satisfy more stringent emission standards in the near future, it is necessary to install air pollution control system and to develop an intensified management plan.n.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.251-258
• /
• 2006

A Malicious code is used to SMiShing disguised as finance mobile Vishing, using Phishing, Pharming mail, VoIP service etc. to capture of personal information. A Malicious code deletes in Anti-Virus Spyware removal programs, or to cure use. By the way, the Malicious cord which is parasitic as use a DLL Injection technique, and operate are Isass.exe, winlogon.exe, csrss.exe of the window operating system. Be connected to the process that you shall be certainly performed of an exe back, and a treatment does not work. A user forces voluntarily a process, and rebooting occurs, or a blue screen occurs, and Compulsory end, operating system everyone does. Propose a treatment way like a bird curing a bad voice code to use a DLL Injection technique to occur in these fatal results. Click KILL DLL since insert voluntarily an end function to Thread for a new treatment, and Injection did again the Thread which finish an action of DLL, and an end function has as control Thread, and delete. The cornerstone that the treatment wav that experimented on at these papers and a plan to solve will become a researcher of the revolutionary dimension that faced of a computer virus, and strengthen economic financial company meeting Ubiquitous Security will become.