• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.109-110
• /
• 2009

본 연구는 리모델링을 통한 슬래브 확장 시, 기존슬래브와 신설슬래브의 접합부에 작용하는 전단성능을 알아보았다. 실험체의 변수는 강관콧타, 전단철근, H형강, 스터드볼트, 원형전단키로 설정하였으며, 이에 따른 실험체를 제작하고 실험을 수행할 예정이다. 실험의 결과, 충분한 전단강도를 보인다면 이를 접합부설계의 기초자료로 활용하도록 한다.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.787-796
• /
• 2013

Sewer joint-related defect is one of the most common domestic sewer defects along with the lateral pipe problem. However, there are currently no criteria that precisely assess the joint-related sewer defects. Therefore, this study examined the joint-related sewer defects found in domestic circumstances, classified them according to the suggested defect code, and presented the examples of defect pictures. Each defect code was organized as the process of out of pipeline alignment (OPA) which shows the progress in deterioration. Each defect was classified into 5 grades depending on appropriate repair and rehabilitation method. The result of this study is expected to be useful for domestic CCTV inspectors to assess the sewer condition and helpful for managers to make a decision of repair and rehabilitation.

• 한국공간구조학회논문집
• /
• 제15권1호
• /
• pp.111-118
• /
• 2015

In Part I, we disccussed of joint between PHC pile and steel column in foundation of large space structures, one prototype of a joint of PHC pile to steel pipe column was suggested on the basis of analytical studies. In this paper, I explain the Joint of PHC pile to steel tube column and more detail of analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.553-558
• /
• 2010

The behavior of composite piles composed of steel pipe pile in the upper part and concrete pile in the lower part by a mechanical splicing joint was examined by field lateral load tests and bending tests. A total of 7 piles including two instrumented piles for bending test were installed. The soil profile consists of soft clay with weak silt with shallow groundwater level. Laboratory tests were carried out to determine the basic soil characteristics and the strength parameters. This paper presents the composite pile behavior with various portions of the upper steel pile: 0, 20, 30, and 45% of the pile embedded pile length. Three-point bending tests were performed to investigate the stress-strain relation at the mechanical joint. Based on these test results, the behavior of composite piles with various upper steel pile length are evaluated and the stability of mechanical joints are examined. Through comparisons with results of field load tests, it was found that lateral load carrying capacity of the composite piles increased and deflections of the composite piles decreased with increasing the upper steel piles. The mechanical joint was proved to retain its structural stability against the tested load conditions. Economical benefits of composite pile of this kind can be gained by setting adequately the length of the upper steel pipe piles.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.42-48
• /
• 2009

Pipe welding is used in various ranges such as civil engineering and ship building engineering. Until now, many technicians work for pipe welding manually under harmful, dangerous and difficult conditions. So it is necessary to install automation process. For automation pipe welding, relation between welding parameters & bead shape should be considered. Using this relation, bead shape could be expected from welding parameters. FCAW was used in this study. Instead of pipe workpiece, fillet joint plate is used, which were inclined 0,45,90,135,180 degree. By analyzing between welding parameters (current, welding speed, voltage) and bead shape parameters with non-linear multiple regression, bead shape parameters could be expected. Piecewise Cubic Hermite Interpolation was used to expect smooth curved bead shape with bead shape parameters. From these processes, bead shape could be expected from welding parameters.

• 한국지반공학회논문집
• /
• 제34권3호
• /
• pp.43-56
• /
• 2018

해상처분장의 호안구조물 및 연직차수공으로 강관시트파일이 주로 사용되며, 강관시트파일은 이음부를 연결하여 주열식으로 설치가 되는 만큼 해상 고유의 횡방향 외력에 대한 구조적인 안정성이 확보되어야 한다. 본 연구의 목적은 새로 개발된 연직차수공 이음부의 구조적인 성능을 평가하는 것이다. 먼저 기존 연직차수공 이음부의 문제점을 고찰하고 시공 및 유지보수 측면에서 기존 이음부 형식과의 차별성을 갖도록 새로운 형태의 DHLT(Double H with L-T) 연직차수공 이음부를 개발하였다. 개발된 DHLT 이음부의 실규모 모형을 제작하고 이음부에 그라우트를 채워 양생시킨 후 압축 및 인장강도실험을 수행하고 그 결과를 기존 연구결과와 비교하였다. 실험결과, DHLT 이음부의 압축강도와 인장강도는 그라우트와 강재의 영향으로 인해 기존 이음부 연구결과에 비해 다소 과소평가되었다. 특히 압축강도 실험의 경우 DHLT 이음부의 비대칭 형상으로 인해 그라우트에 균열이 발생하기 전에 강재에서 먼저 항복이 발생하는 결과를 나타내었다. 본 연구를 통해 연직차수공 개발시 이음부 강도발현에 영향을 끼칠 수 있는 요인을 파악할 수 있었으며, 이를 근거로 더 향상된 연직차수공을 개발할 수 있을 것으로 기대된다.

• 한국공간구조학회논문집
• /
• 제15권3호
• /
• pp.85-93
• /
• 2015

This paper presents a foundation pile to steel column connection that can resist large magnitude of moment and that can be easy installed. The developed joint has spherical shape and it is given the name HAT joint to mean Hallow half-sphere steel joint. Four types of HAT joints are developed. Namely, H-type, T-type, P-type and K-type. In this paper I will talk about the performance assessment of T-type(Tube Column) and P-type(Pile Column) of HAT joints with finite element analysis and experiment on a full scale model is presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.544-549
• /
• 2011

Simplified formulae for axial and bending natural frequencies of bellows are developed using an equivalent thin-walled pipe model. The axial and bending stiffness of bellows is determined using lumped transfer matrix method. Accordingly, the Expansion Joint Manufacturers Association (EJMA) formula for axial and bending stiffness calculation is modified using two different equivalent radii. The results from the simplified formulae are verified by those from a experiment result and a finite element (FE) model and good agreement is shown between the each other.

• 한국지반환경공학회 논문집
• /
• 제20권3호
• /
• pp.21-30
• /
• 2019

복합말뚝(Composite Pile)이란, 수평력이 크게 작용하는 구간에는 강관말뚝, 작게 작용하는 구간에는 PHC말뚝을 특수한 연결 장치로 결합한 말뚝으로서 토목 구조물의 기초 재료로써 상용화되는 추세에 있다. 이러한 복합말뚝의 핵심은 강관말뚝과 PHC말뚝을 연결하는 연결 장치의 안정성과, 이음 위치를 산정하는 설계기준이라고 할 수 있는데 국내에서는 복합말뚝 이음부 위치에 대한 정확한 시방규정이 없어서, LH 설계처(한국토지주택공사, 2009)에서는 도로설계요령 제3권(한국도로공사, 2001)을 참고하여 작성한 "복합말뚝 설계적용 및 설계도서 표기 방안 검토"를 복합말뚝 설계의 기준으로 사용해 오고 있지만 복합말뚝의 단면변화라고 볼 수 없어 적용에 한계성을 가지고 있는 실정이다. 이에 따라 본 연구에서는 복합말뚝의 단면 변화부(강관말뚝과 PHC말뚝의 이음부) 위치에 대한 설계기준을 제안하고 이에 대한 안정성 및 경제성을 검토하고자 실험적인 방법과 해석적인 방법을 이용하여 연결장치에 대한 안정성을 검증하였으며, 국내 교량공사 교대 79개소에 시공된 복합말뚝 설계자료를 분석하여 말뚝 본체 및 이음부에 작용하는 응력, 휨모멘트, 변위 등의 경향성을 파악하였고, 개선식이 적용된 재설계 과정을 통해 이음부에서 발생한 응력들이 연결장치와 PHC말뚝의 허용응력 수치 내로 발생하는 것을 확인하였다. 결론적으로 사례분석을 통한 복합말뚝 이음위치의 설계 제안식은 복합말뚝을 설계함에 있어서 안정성과 경제성을 모두 고려한 개선된 설계기법임을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.383-392
• /
• 2022

Although pipelines are composed of segmental tubes commonly connected by rubber gasket or push-in joints, current studies mainly simplified pipelines as continuous structures. Effects of joints on three-dimensional deformation mechanisms of existing pipelines due to tunnel excavation are not fully understood. By conducting three-dimensional numerical analyses, effects of pipeline burial depth, tunnel burial depth, volume loss, pipeline stiffness and joint stiffness on bending strain and joint rotation of existing pipelines are explored. By increasing pipeline burial depth or decreasing tunnel cover depth, tunneling-induced pipeline deformations are substantially increased. As tunnel volume loss varies from 0.5% to 3%, the maximum bending strains and joint rotation angles of discontinuous pipelines increase by 1.08 and 9.20 times, respectively. By increasing flexural stiffness of pipe segment, a dramatic increase in the maximum joint rotation angles is observed in discontinuous pipelines. Thus, the safety of existing discontinuous pipelines due to tunnel excavation is controlled by joint rotation rather than bending strain. By increasing joint stiffness ratio from 0.0 (i.e., completely flexible joints) to 1.0 (i.e., continuous pipelines), tunneling-induced maximum pipeline settlements decrease by 22.8%-34.7%. If a jointed pipeline is simplified as a continuous structure, tunneling-induced settlement is thus underestimated, but bending strain is grossly overestimated. Thus, joints should be directly simulated in the analysis of tunnel-soil-pipeline interaction.