• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.326-326
• /
• 2006

The combination of living anionic and coordination polymerization techniques enabled to synthesize the polystyrene-b-polyisoprene-b-poly (butyl isocyanate) triblock polymers. Their microphase-separated structures were zig-zag structures for high ${\phi}_{PIC}$ samples, and hockey-puck structures were also observed. The phase diagram for PSt-b-PIp-b-PIC rod-coil polymers was different from that for PS-PBd-PMMA triblock polymers, and it was found that ${\phi}_{PIC}$ was the important factor to determine the microphase-separated structures.

• 한국해양공학회지
• /
• 제16권5호
• /
• pp.66-72
• /
• 2002

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear power plant. However, effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. In this study, we investigated failure modes of locally wall thinned pipes and AE signals by bending test. From test results, we could be divided four types of failure modes of ovalization, crack initiation after ovalization, local buckling and crack initiation after local buckling. And fracture behaviors such as elastic region, yielding region, plastic deformation region and crack progress region could be evaluated by AE counts, accumulative counts and time-frequency analysis during bending test. The result of the frequency range is expected to be basic data that can inspect plants in real-time.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.174-180
• /
• 2010

Conductive and radiative thermal model configurations of an imager of a geostationary satellite are presented. A two-plane method is introduced for three dimensional conductive coupling which is not able to be treated by thin shell plate thermal modeling technique. Especially the two-plane method is applied to massive matters and PIP(Payload Interface Plate) in the imager model. Some massive matters in the thermal model are modified by adequate correction factors or equivalent thickness in order to obtain the numerical results of thermal modeling to be consistent with the analytic model. More detailed nodal breakdown is specially employed to the object which has the rapid temperature gradient expected by a rule of thumb. This detailed thermal model of the imager is supposed to be used for detailed analyses and test predictions, and be correlated with the thermal vacuum test results before final in-flight predictions.

• 한방안이비인후피부과학회지
• /
• 제23권3호
• /
• pp.33-41
• /
• 2010

Background & Objective : This study was performed to find a new anti-aging, anti-wrinkle agent. Ten kinds of hers were evaluated by proliferation, cytotoxicity, collagen synthesis tests in cultured human dermal fibroblast. Methods : MTT assay was carried out to check cell proliferation, cytotoxic effect of each herbal medicine. Collagen synthesis was investigated by the amount of propeptide using procollagen type-Ⅰ C peptide(PIP) ELISA kit(Takara). Results and Conclusions : There are no cytotoxicity in all group herbs by MTT assay. Collagen synthetic ability was greatest in LYCII FRUCTUS(LF) and was excellent in order of Rehmanniae Radix Preparat(RRP) > Nelumbinis Semen(NS) > Asparai Radix(AR) > Schizandrae Frucus(SF).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.333-338
• /
• 2000

At present, reinforced concrete pipe has been widely used as drain pipe. However, many reinforced concrete pipe is exposed at deteriorated environment by the growth of a sulfur-oxidizing bacterium isolated from corroded concrete. The purpose of this study is to evaluate the effects of lining by polymer-modified mortar on the development in durability of reinforced concrete pipe. Polymer-modified mortars ate prepared with various polymer typer as cement modifier and polymer-cement ratio and rested for compressive and flexural strengths, adhesion in tension, acid resistance test, freezing and thawing test, and lining test of product in the field. From the rest results, it is apparent that polymer-modified mortars have good mechanical properties and durability as lining material. In practice, all polymers can be used as lining materials for reinforced concrete pip, and type of polymer, and polymer-cement ratio and curing conditions are controlled for good lining product.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.3-5
• /
• 2000

Among the various processing techniques used in HTS wire fabrication, the PIP(Powder In Tube) method is currently one of the most promising for applications on an industrial scale. In this study, we have fabricated Bi-2223/Ag superconducting tapes using the modified PIT process, where several process factors were changed and improved, ie., powder packing, drawing, rolling and heat treatment. We obtained Bi-2223 tape that have high critical current, 46 a at 77.3 K, have high critical current, 46A at 77.3 K, self field although the tape was not pressed but only rolled. The critical current of 100m class long length tape was measured 21.6A at the same criterion. Besides, the critical current of Bi-2223/Ag tape was measured applying magnetic fields with different directions at various temperatures.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (상)
• /
• pp.351-354
• /
• 2000

인터렉티브 디지털 TV 는 기존의 텔레비전 기능에 인터넷 기능을 결합함으로써 TV 를 이용한 전자상거래, VOD 서비스, 표적 광고 등을 가능하게 한다. 이와 같은 서비스를 위해서는 TV 용 웹브라우저가 필수적인 응용 프로그램으로 요구된다. 본 논문에서는 일반 웹 컨텐트의 브라우징 기능 뿐만아니라 디지털 TV 의 데이터 방송 수신 기능이 포함된 디지털 TV 용 웹브라우저의 설계를 소개한다. 본 웹브라우저의 설계에서는 실시간 오디오/비디오 플레이어와의 연결성을 고려하였고 WebPIP, TV오버레이 등을 통한 방송 컨텐트와 웹 컨텐트의 통합 기능이 추가되었다.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.19-24
• /
• 2010

The purpose of this study is to develop a snow melting system using the pulsating heat pipe(PHP). The experimental apparatus is consisted of a PHP, a concrete structure, a constant water thermostatic bath and a flowmeter. The experiment was performed at the outdoor air temperature of $-8^{\circ}C$ and inlet temperature of hot water of $75^{\circ}C$. PHP is the closed and non-loop type heat exchanger which is charging R-410A as an operating fluid. As experimental results, the temperature profile of vertical and horizontal orientation of concrete structure was measured with operating time. The heat flux of the snow melting was required more than 300 $W/m^2$. We confirmed that the snow melting system using the PHP was useful for anti-freezing road.

• 한국국방경영분석학회지
• /
• 제29권1호
• /
• pp.43-56
• /
• 2003

This paper is intended to investigate the Build-up Method of SCM(Supply Chain Management) Connection applying EC Standard. SCM helps companies plan and supply to meet customer demand. SCM is the only solution available today that enables an organization to strategize, plan and execute a company's buy, make, move, store, fulfill and service business processes across multiple enterprises for total profitability. The research of modern scientists has thrown new light on the subject. However, the study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM systems, which require to introduce the functions of EC, need to be changed. Summarizations of the main points that have been analyzed in this paper are as follows:. the sharing information for connection and the Rosetta-net standard of the existing SCM system(Order management module(PIP 3A4) of the Rosetta-net specifications for connection by the Rosetta-net). Finally, it shows the process of the gateway for connecting among the existing SCM systems.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.95-105
• /
• 1997

A diesel engine has become smaller and higher, thus sprays injected in high speed may be impinged on a small combustion chamber wall if there is not enough strong swirl. Those combustion chambers should have proper measures to avoid the spray impinged and deposited on a wall. One of the measures is a chamber prepared impingement parts raised on a chamber wall surface. In this system a spray is injected into the raised pip, broken into a number of smaller drops and spreaded out away from the wall surface. Therefore the fuel droplets distributes over inside of the combustion chamber. In this study, the positions, sizes and angles of the raised land are discussed to help the chamber design using spray wall impaction. The characteristics of the spray impinged on various lands are investigated and compared with each other. Then chamber shapes are discussed with the spray characteristics and the proper positions and size are proposed in some chamber volumes.