• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.136-143
• /
• 1996

본 연구에서는 정유공정의 한 부부인 demethanizer의 core exchanger 주위 열교환기들에 대해 핀치설계법(pinch desgin method)을 이용하여 새로운 열교환망 합성을 수행하였다. 이로부터 초기에 설정했던 최소접근온도차가 총비용, 즉, 장치비와 에너지 비용에 결정적인 역할을 하는 것으로 확인되었다. 따라서, 본 연구에서는 이 총비용의 목표값이 최소가 되는 최적 최소접근온도차가 존재하고, 이로부터 열교환망 합성이 수행되어져야 최적의 열교환망 합성이 이루어져야 한다는 결론을 얻었다.

• The Korean Journal of Physiology
• /
• v.24 no.2
• /
• pp.305-317
• /
• 1990

The present study was performed to investigate modification in the electrophysiological characteristics of cat dorsal horn cells during neurogenic inflammation induced by mustard oil. The results obtained were summarized as follows: 1) Following subcutaneous injection of mustard oil the majority of wide dynamic range (WDR) cells (10/15 units) showed enhanced responses (80%) to brush, while the responses to all types of mechanical stiumli were enhanced in 3/15 units. One cell was further activated by pinch and the another was not affected at all after induction of inflammation. 2) The sensitization of WDR cell was resulted from subcutaneous injection of mustard oil either inside or outside of the receptive field (RF), whereas the spontaneous activity increased only after mustard oil was injected inside of the RF. 3) In the animal with inflammation the responses of high threshold (HT) cell to noxious stimulus were not altered, while HT cell responded to such mechanical stimulus as pressure which was usually ineffective in normal animals. 4) After induction of inflammation, low threshold (LT) cell appeared to be converted to WDR cell, showing responses not only to brush but also to pressure and pinch. 5) The mustard oil-induced inflammation enhanced responses of WDR and HT cells to the thermal stimuli and also resulted in a pronounced after-discharge in WDR cells. 6) After subcutaneous injection of lidocaine, the increased background activity of WDR cells due to inflammation was almost completely abolished. 7) A subcutaneous injection of mustard oil inside of the RF invariably desensitized the dorsal horn cells which receive sensory inputs from the inflamed RF. From the results of Present study it was revealed that a neurogenic inflammation induced by mustard oil resulted in an enhancement of responses of cat dorsal horn cells to mechanical and thermal stimuli.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.3
• /
• pp.372-378
• /
• 2000

The carpal tunnel syndrome is one of the most common entrapment neuropathy. Surgical treatments consist of conventional open technique, alternative technique using retinaculatome, and endoscopic surgery. This study compares the outcomes of surgical treatment of carpal tunnel syndrome following conventional versus endoscopic release. The authors reviewed 56 cases of 33 patients with carpal tunnel syndrome treated surgically in our institute from January 1991 to May 1998. The follow-up evaluation was possible in 36 cases of 20 patients who had conventional release and in 11 cases of 7 patients with endoscopic release. The following parameters were evaluated for comparison : improvement of symptom, return to normal work, recovery of strength of grip and pinch, rate of complication, follow-up electrophysiologic finding. Compared with open decompression, the group of endoscopic decompression needed significantly less time to go back to work(p<0.001). Also strength of grip and pinch improved faster in the group of endoscopic decompression as well, compared with open decompression(p<0.05). These results indicate that endoscopic procedure is an excellent, minimally invasive method to treat carpal tunnel syndrome, performed by surgeons who are fully aware of the anatomy.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.62-69
• /
• 2020

Background Cryolipolysis, a preferred method for minimally invasive body contouring, involves the noninvasive cooling of adipocytes to induce lipolysis without damaging other tissues. This study aimed to evaluate the safety and efficacy of cryolipolysis for the treatment of excessive fat tissue. Methods Between May 2014 and December 2017, 231 patients with 448 areas of interest were enrolled and their records were retrospectively reviewed. We used five different vacuum applicators, and the best-fitting applicator was used for each area. One cycle of cryolipolysis was applied at a cooling intensity factor of 41.6. The efficacy was evaluated 12 weeks after treatment via review of clinical photographs, the pinch test, and ultrasonographic measurements of fat thickness. The occurrence of any complications was also assessed. Results The volume was reduced in all of the areas to which cryolipolysis was applied. The rate of reduction of the fat layer as measured via the pinch test was 19.2%, and the rate of the decrease in fat layer thickness as measured via ultrasonography was 22.8%. Fat reduction of the upper arm differed significantly from that of the abdomen and flank, but no significant difference was found between sexes. The side effects were limited to erythema, edema, bruising, and numbness at the treatment site and resolved without treatment. Conclusions Cryolipolysis, with new and better-fitting applicators, is safe, fast, and effective for the reduction of excessive fat tissue on the abdomen, back, flank, and extremities. It is a good option for treating excess adipose tissue in Asian patients.

• Journal of Acupuncture Research
• /
• v.39 no.2
• /
• pp.96-104
• /
• 2022

This study aimed to examine the clinical efficacy of electroacupuncture treatment for carpal tunnel syndrome by reviewing published randomized controlled trials. Among the 186 studies retrieved from 7 online databases (PubMed, Cochrane library, CNKI, NDSL, RISS, OASIS, KMbase) on October 29, 2021, 4 studies were selected according to the inclusion, exclusion criteria, and were evaluated using risk of bias. Control groups for electroacupuncture were wearing a splint at night, traditional acupuncture, and medication. Methods such as total effective, functional status scale, symptom severity scale, electromyography, tip pinch strength, visual analogue scale, numeric rating scale, and ultrasound were used to evaluate the therapeutic effect. Electroacupuncture was reported to have significant treatment results compared with the control group in methods such as total effectiveness, electromyography, and tip pinch strength. However, the quality of the studies (using risk of bias) does not allow reliable conclusions to be made. Many high quality (low risk of bias) randomized controlled trials are needed to examine the efficacy of electroacupuncture treatment for carpal tunnel syndrome.

• Journal of Korean Academy of Nursing
• /
• v.33 no.5
• /
• pp.591-600
• /
• 2003

Purpose: The purpose of this study was to investigate the effects of exercise training using biofeedback and constraint-induced movement on the upper extremity function of hemiplegic patients. Method: A non-equivalent pretest-posttest design was used. Study subjects were a conveniently selected group of 40 hemiplegic patients(20 experimental subjects, 20 control subjects) who have been enrolled in two community health centers. After biofeedback training the subjects of experimental group were given constraint-induced movement, involving restraint of unaffected U/E in a sling for about 6 hours in a day over a period of two weeks, while at the same time intensively training the affected U/E. Outcomes were evaluated on the basis of the VIE motor ability(hand function, grip power, pinch power, U/E ROMs), and motor activity(amount, quality). Result: 1. After 2 weeks of treatment, the motor abilities of affected U/E(hand function, grip power, pinch power, ROMs of wrist flexion, elbow flexion and shoulder flexion/extension) were significantly higher in subjects who participated in exercise training than in subjects in the control group with no decrement at 4-week follow-up. However, there was no significant difference in wrist extension between experimental or control group. 2. After 2 weeks of treatment, the amount of use and the quality of motor activity of affected U/E were significantly higher in subjects who participated in exercise training than in subjects in the control group with no decrement at 4-week follow-up. Conclusion: The above results state that exercise training using biofeedback and constraint-induced movement could be an effective intervention for improving U/E function of chronic hemiplegic patients. Long-term studies are needed to determine the lasting effects of constraint-induced movement.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.4
• /
• pp.417-423
• /
• 2017

Objective : Repair of sensorial nerve defect is an important issue on peripheric nerve surgery. The aim of the present study was to determine the effects of sensory-motor nerve bridging on the denervated dermatomal area, in rats with sensory nerve defects, using a neural cell adhesion molecule (NCAM). Methods : We compared the efficacy of end-to-side (ETS) coaptation of the tibial nerve for sural nerve defect repair, in 32 Sprague-Dawley rats. Rats were assigned to 1 of 4 groups : group A was the sham operated group, group B rats had sural nerves sectioned and buried in neighboring muscles, group C experienced nerve sectioning and end-to-end (ETE) anastomosis, and group D had sural nerves sectioned and ETS anastomosis was performed using atibial nerve bridge. Neurological evaluation included the skin pinch test and histological evaluation was performed by assessing NCAM expression in nerve terminals. Results : Rats in the denervated group yielded negative results for the skin pinch tests, while animals in the surgical intervention groups (group C and D) demonstrated positive results. As predicted, there were no positively stained skin specimens in the denervated group (group B); however, the surgery groups demonstrated significant staining. NCAM expression was also significantly higher in the surgery groups. However, the mean NCAM values were not significantly different between group C and group D. Conclusion : Previous research indicates that ETE nerve repair is the gold standard for peripheral nerve defect repair. However, ETS repair is an effective alternative method in cases of sensorial nerve defect when ETE repair is not possible.

• Korean Journal of Adult Nursing
• /
• v.16 no.4
• /
• pp.626-635
• /
• 2004

Purpose: The purpose of this study was to explain the effects of upper extremity exercise program on hemiplegic stroke patients. Method: The research was designed by a non-equivalent pretest-posttest way. The data were collected from February to August 2003 at a community health center located in Seoul. The study subjects were a conveniently selected group of 27 hemiplegic patients. The subjects were divided into two groups, the experimental group and the control group. 14 subjects were assigned to the experimental group in which the subjects did the upper extremity exercise training for 2 hours once a week during four weeks, while 13 subjects were assigned to the control group. The outcomes were evaluated on the basis of the upper extremity motor ability(hand power, pinch power, upper extremity ROMs), amount of motor use and the degree of depression. Result: 1. After treatment, the motor abilities of the affected upper extremity(hand power, pinch power, ROMs of wrist flexion/extension, shoulder extension) were significantly different between the two groups. However, there were no significant differences in elbow and shoulder flexion between experimental and control group. 2. After treatment, amount of motor use of affected upper extremity were significantly different between the two groups. 3. After treatment, the degree of depression were significantly different between the two groups. Conclusion: In considering these results, the upper extremity exercise program could be effective for hemiplegic patients by improving the function of their upper extremity. Long-term studies are needed to determine the effects of upper extremity exercise program.

• The Journal of Korean Physical Therapy
• /
• v.22 no.1
• /
• pp.33-38
• /
• 2010

Purpose: This study investigated the effect of taping therapy on metacarpophalangeal (MCP) disorders of the thumb. Methods: Twenty eight patients were enrolled in this study. They were randomly assigned to experimental (n=16) or a control group (n=12). The experimental and control groups received Ultrasound (Gymna Pulson 200) operating at a frequency of 3MHz and an intensity of $1.0W/cm^2$ with a 100% duty cycle for 10 minutes. The experimental group received, additionally, taping using Kinesiotape on the injured thumb. The following parameters were measured:pain during rest and flexion of the thumb, tenderness, range of motion (ROM), pinch and spherical grip power pre- and post-treatment. This study was carried out 3 days per week throughout the 2-week treatment. Results: There were significant improvements in pain during rest and flexion of the thumb, tenderness, ROM, pinch and spherical grip power between pre- and post-treatment times in both groups (p<0.05). However, there was a significant difference in all parameters between the experimental and control groups (p<0.05). Finally, the satisfaction level after intervention was significantly higher in the experimental group than in the control group (p<0.05). Conclusion: Taping is effective for treating pain and dysfunction in patients with thumb disorders.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.29-34
• /
• 2012

Power window motor assembly including ECU system is important to doors of automobile. This study is done for own development instead of importing of power window motor assembly. This paper is written under five specific subjects. The first, making of prototype sample and analysis of mass-production problem using CAE, the second, design of mass-production mold(2D and 3D), the third, manufacturing of sample mold, the fourth, tryout and measuring of 3 dimensions, the fifth, data analysis and mold modify. In the among them, product sample and analysis of mass-production using CAE, design and manufacture of mass-production mold, and production of sample mold are successfully done. In the results, it is made clear that two cavity and one gate are proper to make a mold of power window motor assembly housing. Besides, it is acquired own technology for mass-production of power window motor.