• 한국공간구조학회논문집
• /
• 제7권6호
• /
• pp.53-60
• /
• 2007

스페이스프레임의 볼 조인트 접합부에서는 축부에 핀의 삽입을 위한 구멍이 존재하기 때문에 응력집중으로 인한 취성파단의 우려가 있다. 따라서 접합부에서의 변형능력이나 에너지흡수능력은 낮은 편이다. 본 연구에서는 볼 조인트 접합부의 소성변형능력을 향상시키기고 현장에서 발생할 수 있는 시공오차의 흡수가 가능하도록, 볼트의 나사부나 핀부의 취성파단 없이 감소된 축부에서 소성변형능력이 기대되는 새로운 접합상세를 개발하였으며 수치해석과 실험을 통해 그 성능을 검증하고자 하였다. 수치해석과 실험을 통하여 볼트의 축부 및 핀부의 단면을 조절함으로써 기존 고력볼트보다 소성변형능력이 향상됨을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.722-733
• /
• 1999

The wall pressure fluctuations of a turbulent boundary layer over a flat plate have been investigated in an anechoic wind tunnel facility. The anechoic wind tunnel consists of acoustically-lined duct, muffler, and splitter-type silencer for noise suppression and vanes for reducing head losses involved. To improve spectra characteristics in high frequency range, a 1/8" pressure-type microphone sensor, which has a pin-holed cap of various diameters, was employed in this experiment. It was shown that the pin-holed microphone sensor with a dimensionless diameter $d^+$ of 7.1 resolved the high frequency pressure fluctuations most effectively among ones with various pin-hole diameters. The measured wall pressure spectra in terms of three types of scaling parameters were in good agreement with other experimental and numerical results. The pressure events of high amplitude were found to contribute to total fluctuating pressure energies in the turbulent boundary layer significantly and supposed to radiate to the far-field effectively.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.239-242
• /
• 2009

Friction stir spot welding (FSSW), developed based on principle of friction stir welding, has been paid attention as a new solid-state spot welding process. Since FSSW can produce high-quality weld in Al alloys more easily than resistance spot welding, this process has been already used for construction of Al components in the automotive industries. Despite the large industrial interests in FSSW, fundamental knowledge on welding phenomena of this process has not been fully understood. In this study, FSSW phenomena, such as the consolidation mechanism, the microstructural evolution and the material flow, were examined in Al alloy 6061. This study clarified that the elliptical zone found in the vicinity of the pin hole on the cross section was characterized by the initially lapped surface of two sheets. Moreover, the following material flow was proposed; capture of the upper material with the threads on the pin surface, spiral flow along the tool rotation, and then release at the tip of the pin.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.41-47
• /
• 2021

In this study, the hinges of heavy weight doors were designed and analyzed in line with the trend that built-in appliances are becoming larger and the weight of doors is also increasing. The main specification of the heavy weight door hinge is to allow the deflection at the end of the door to be less than 2 mm when opening and closing, including the automatic closing, slow closing, and closing force control functions. The structural analysis of the design mechanism, component design, and methods for improving the deflection are as follows: 1) Mechanism of the automatic closing function should sense automatically using the spring compression force at a specific angle by the contact between the cam and the cam module roller. 2) Through structural analysis, the maximum stress of the door was found in the link pin hole connected to the pin at each link. 3) Consequently, the pin holder was designed and applied, with little variance, but up to 93% of the specification limit.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.489-493
• /
• 2000

Turbine blade has trouble of cracking at root region. Fracture surface of blade root is surveyed by SEM and AFM to clear relation between fracture mechanical parameter and surface parameter (striation width and surface roughness). Service stress is predicted by maximum height roughness $R_{max}$, on fractured surface and stress analysis on turbine blade. It is to thought that turbine blade is fractured by abnormal condition such as incorrect fittings between pin and pin hole but isn't fractured by normal service conditions such as steam pressure, centrifugal force and torsional force.

• 한국방사선학회논문지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2016

현재 CCD 및 TFT LCD 기반의 평판형 디지털 X선 센서를 이용한 많은 디지털 X선 영상장치가 활용되고 있으며, 특히 포톤계수형 센서 기술에 대한 많은 연구가 수행되고 있다. 본 연구에서는 포톤계수형 센서의 정량적 성능 평가 항목인 포톤계수효율을 측정하기 위해 포톤계수형 센서 물질에 입사되는 X선 플루엔스 측정하였다. IEC 61223-1-2 권고안의 RQA-M2 Radiation beam quality를 이용하여 포톤 플루엔스를 측정한 결과, $10{\mu}m$ 핀홀 영역에서 입사 광자 플루엔스는 $4photon/unit\;area{\cdot}{\mu}Gy$, $30{\mu}m$ 핀홀 영역에서 약 $50photons/unit\;area{\cdot}{\mu}Gy$, $100{\mu}m$ 핀홀 영역에서 $698photons/unit\;area{\cdot}{\mu}Gy$의 플루엔스로 규정할 수 있었다. 셋업된 입사 플루엔스를 이용하여 포톤계수형 센서 물질에서의 X선 조사시 출력파형을 측정함으로써 실제 포톤계수효율을 측정할 수 있을 것으로 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.163-167
• /
• 2001

A two-dimensional progressive failure analysis method is presented for the strength characterization of the composite joints under pin loading. The eight-nodes laminated she]1 element is utilized based on the updated Lagrangian formulation. The criteria by Yamada-Sun, Tsai-Wu, and the maximum stress are used for the failure estimation. The stiffness of failed layer is degraded by the complete unloading method. No factor depending on test is included in the finite element analysis except for the material strength and stiffness. Total 20 plate specimens with and without hole are tested to validate the finite element prediction. The Tsai-Wu failure criterion most conservatively estimates the strength of laminate, and the maximum stress criterion yields the highest strength because it does not consider the coupling of the failure modes. The strength by Yamada-Sun method neglecting the matrix failure effect are located between other two methods and shows best agreement with test result for laminate with hole.

• Nuclear Engineering and Technology
• /
• 제28권4호
• /
• pp.397-404
• /
• 1996

The hydrogenated amorphous silicon (a-Si : H) holds good promise for radiation detection from its inherent merits over crystalline counterpart. For the application to alpha spectroscopy, the induced charge collection in a-Si : H pin detector diodes ons simulated based on a relevant non-uniform charge generation model. The simulation was peformed for the initial energy and the range of incident alpha particles, detector thickness and the operational parameters such as the applied reverse bias voltage and shaping time. From the simulation, the total charge collection was strongly affected by hole collection as expected. To get a reasonable signal generation, therefore, the hole collection should be seriously considered for detector operational parameters such as shaping time and reverse voltage etc. For the spectroscopy of alpha particle from common alpha sources, the amorphous silicon should have about 70${\mu}{\textrm}{m}$ thickness.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.146-153
• /
• 1997

An experiment was conducted to figure out the atomization characteristics of a highly viscous biodiesel fuel with rice-barn oil applying and ultrasonic energy into it. A spray simulator for the droplet atomization, an ultrasonic system, and six different nozzles(3 pintle-type nozzles and 3 single hole-type nozzles) were made. To investigate effects of ultrasonic energy in a highly viscous liquid fuel, an immersion liquid method was used as a measurement method on droplet size distributions. It was found that the ultrasonic energy was effective for the atomization improvement of the rice-bran oil as a highly viscous biodiesel fuel and the factor나 such as the nozzle opening pressure, pin-edge angles, hole diameters, and collection distances affected the atomization of spray droplets.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.721-724
• /
• 1998

A circular image in a space don't appear as an exact circular image and appear as an oval in image buffer because distortion of camera lens, number of horizontal pixel of CCD photographing element and unmber of horizontal pixel of image buffer are not in accordance. By using familiar 3-D coordinate, know as circle's diameter, and cicle's center, you correct a pin-hole camera and get an exact circle with reprojection a circle into image buffer, according to a perspective.