• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.97-104
• /
• 1998

In order to advise how to solve the problems and suggest on the mechanization of beef farm, the facilities and equipment for feeding and supplying water to the animals and transporting manure, and farm machineries of sixty-seven beef cattle farms in western Chungnam Province were surveyed. The results are as follows; 1. The proportions of number of heads per farm for above 70, 50∼70, 30∼50, 10∼30 and below 10 heads were 26, 18, 29, 13 and 13, respectively. The farms with the annual income more than 30 million won are consisted of 67.6% of the farms surveyed which showed to be higher than national average. 2. Only 19% of farms had automatic feeding system. Water was supplied by water cup(45%), opening and shutting water tab(27.6%) and bucket. 3. Cattle manure was transported by manpower (46%) by loader (34%) and by gravitational flow (14%). Most of manure(97%) was composted after treatment of drying or piling up outside. 4. More instruction and education were required because of the insufficient routine checking and fixing for farming machines, and unsystematic education for learning skills. 5. 65% of farms felt unsatisfied about after service(A/S) for their machinery. The main reason why the farmers were not satisfied was that it took too much time to be repaired. 6. When the farms purchased facilities, equipment and machinery, they did not analyze economic value of them and keep a diary. To make effective use of machines, the most available model for purchasing and managing of machines must be developed and applied to various scales of management.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.27-33
• /
• 2014

This paper presents a brief summary on a relatively new plasma aided electrolytic surface treatment process for light metals. A brief discussion regarding the advantages, principle, process parameters and applications of this process is discussed. The process owes its origin to Sluginov who discovered an arc discharge phenomenon in electrolysis in 1880. A similar process was studied and developed by Markov and coworkers in 1970s who successfully deposited an oxide film on aluminium. Several investigation thereafter lead to the establishment of suitable process parameters for deposition of a crystalline oxide film of more than $100{\mu}m$ thickness on the surface of light metals such as aluminium, titanium and magnesium. This process nowadays goes by several names such as plasma electrolytic oxidation (PEO), micro-arc oxidation (MOA), anodic spark deposition (ASD) etc. Several startups and surface treatment companies have taken up the process and deployed it successfully in a range of products, from military grade rifles to common off road sprockets. However, there are certain limitations to this technology such as the formation of an outer porous oxide layer, especially in case of magnesium which displays a Piling Bedworth ratio of less than one and thus an inherent non protective oxide. This can be treated further but adds to the cost of the process. Overall, it can be said the PEO process offers a better solution than the conventional coating processes. It offers advantages considering the fact that he electrolyte used in PEO process is environmental friendly and the temperature control is not as strict as in case of other surface treatment processes.

• 한국화재소방학회논문지
• /
• 제32권5호
• /
• pp.57-66
• /
• 2018

29명이 사망하고 40명이 부상을 입은 제천 스포츠센터 화재 사례에 대해 다수 사상자가 발생한 원인을 초기대응과 관리적인 측면을 중심으로 분석하였다. 초기대응 측면은 119신고 지연, 2층 세신사 비상구로 피난유도를 하지 않음, 1층과 3층 비상계단쪽 방화문 개방 상태 유지, 3층 주계단실 쪽 방화문 닫지 않음, 비상방송을 하지 않음으로 분석하였다. 관리적인 측면은 1층의 스프링클러설비 알람밸브 폐쇄, 소방펌프 제어반에서 기동 정지 위치에 놓음, 주차장 반자 안 누수 및 누전 방치, 2층 여탕의 휴게실 피난구유도등이 가려져 있고 비상구에 물건이 적치됨, 2층 자동문의 조작버튼 불량상태로 방치, 형식적인 소방안전관리, 소방시설 부실한 자체점검, 방화셔터와 배연창 미작동으로 분석하였다.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.427-436
• /
• 2010

Much oyster shell is breeding by character and conduct of oyster-industry for a long time among them. An experimental study was carried out to investigate the recycling possibility of waste oyster shells, which induce environmental pollutions by piling up out at the open or the temporary reclamation. The purpose of this study is to develope eco-friendly binder using waste oyster shells, and to reinforce soils fur soft soil improvement. In this paper, a series of laboratory tests including compressive pot tests were performed to evaluate characteristics of soils treated by developed waste oyster shells with different water content of soils. Based on test results, eco-friendly Supporter manufactured from waste oyster shells were estimated as good resource materials for soft soil improvements. We got the conclusion by a series of experiment, It is verified that change of pH of soil is improved by mixing with oyster shells. The homogenization method for deducing apparent of oyster shells, which can consider micro-structure of mixed soil, is introduced. The improvement treatment leaded to enlarge fluctuation of soil moisture content. The effect of calcium concentration was good though improvement treatment of physical property. In addition, the crop yield in amelioration plots increased. It means that the increase of crop yield was caused by improvement of soil physical properties rather than improvement of calcium concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.502-502
• /
• 2007

Current thin film process using memory device fabrication process use expensive processes such as manufacturing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as PCB, FCPB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line for the electronic circuit board using metal ink contains Ag nano-particles. Metal lines are fabricated by two types of printing methods. One is a conventional printing method which is able to quick fabrication of fine pattern line, but has various difficulties about thick and high resolution DPI(Dot per Inch) pattern lines because of bulge and piling up phenomenon. Another(Second) methods is sequential printing method which has a various merits of fabrication for fine, thick and high resolution pattern lines without bulge. In this work, conductivities of metal pattern line are investigated with respect to printing methods and pattern thickness. As a result, conductivity of thick pattern is about several un.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.670-679
• /
• 2010

In this paper, a new approach using a pixel-based correction method was developed to fix the non-uniform responses of flat-bed type scanners used for radiochromic film dosimetry. In order to validate the method's performance, two cases were tested: the first consisted of simple dose distributions delivered by a single port; the second was a complicated dose distribution composed of multiple beams. In the case of the simple individual dose condition, ten different doses, from 8.3 cGy to 307.1 cGy, were measured, horizontal profiles were analyzed using the pixel-based correcton method and compared with results measured by an ionization chamber and results corrected using the existing correction method. A complicated inverse pyramid dose distribution was made by piling up four different field shapes, which were measured with GAFCHROMIC$^{(R)}$EBT film and compared with the Monte Carlo calculation; as well as the dose distribution corrected using a conventional method. The results showed that a pixel-based correction method reduced dose difference from the reference measurement down to 1% in the flat dose distribution region or 2 mm in a steep dose gradient region compared to the reference data, which were ionization chamber measurement data for simple cases and the MC computed data for the complicated case, with an exception for very low doses of less than about 10 cGy in the simple case. Therefore, the pixel-based scanner correction method is expected to enhance the accuracy of GAFCHROMIC$^{(R)}$EBT film dosimetry, which is a widely used tool for two-dimensional dosimetry.

• 헤리티지:역사와 과학
• /
• 제34권
• /
• pp.60-79
• /
• 2001

We can infer from collections of prose in Cho-sun period that the main period is from King Se-jong's reign to King Yoeng-jo's or between the 15th and the 17th century. The ideological background and the dignity of the rock garden is derived from Taoist hermitism and Nitze and Jeng-je's quietism. The representation of the rock garden as tri-god mountain comprising Bong-lai, Bang-jang and Young-ju is based on the tradition of making the tripartite rock garden in a pond practiced in the three north-eastern countries, Korea, China and Japan. And it's the representation of quietistic world of eternal life that had been sought by the taoism. Making a pond in which they plant lotus and made rock garden. they enjoyed watching immaculately pure lotus flower bloom even in the mud. It is compared to the confucians' seeking for virtue even in the profane or defiled world. Another motive of intellectuals to make rock gardens is their love of nature and its landscapes and their preference of recluse and temperate life to attaching to high public office, which was the tendency of the learned, established by the influence of taoist and quietist tradition. The essays portray the fountain water, ponds, waterfalls. the hilltops, the mountain pass over the ridge. winded lanes, valleys, caverns, and other architectural elements. The technic of building rock gardens includes those of harmonizing each elements of landscapes in the water, that of irrigation, building formation, and those of piling up the mountains and hills. With some comments on planting trees, grass and flowers. The original location of rock garden, esp. in case of taoist Chae-su's rock garden with waterfalls, is Ian-ri, Ian-myon in the city Sang-ju. Since no relics of rock gardens are to be found in any examples of Korea's traditional gardening, the study of rock gardening by analyzing the prose collections of Cho-sun period can be significant for the study of designing water space that has been considered the center of a garden space.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.337-349
• /
• 2024

The growing quantity of tires and building trash piling up in landfills poses a serious threat to the stability of the ecosystem. Researchers are exploring ways to reduce and use such byproducts of the construction industry in an effort to promote greener building practices. Thus, using recycled crumb rubber from scrap tires in concrete manufacturing is important for the industry's long-term viability. This study examines the proportion of waste rubber in fiber form, specifically at weight percentages of 5%, 10%, and 15%. Moreover, the study examines the shear behavior of reinforced concrete beams. A total of twelve RC beam specimens, each sized 100 mm by 150 mm by 1000 mm (w × d × L), were constructed and positioned to the test. Various mixtures were designed with different levels of scrap tire rubber content (0%, 5%, 10%, and 15%) and Stirrup Vol. Ratio (2.10, 2.80, and 3.53) in reinforced concrete beams. The findings indicate that the inclusion of scrap rubber in concrete leads to a decrease in both the mechanical characteristics and weight of the material. This is mostly attributed to the lower strength and stiffness of the rubberized concrete. Furthermore, estimations generated by a variety of design codes were examined alongside the obtained data. In order to make a comparison between the estimates provided by the different codes such as ACI 318-14, CEB-FIB and Iranian national building codes, a calculation was done to determine the ratio of the experimental shear strength to the anticipated shear strength for each code.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.853-856
• /
• 2008

경량기포 콘크리트는 건축물 방바닥의 단열, 차음 및 높이차 조정 등의 목적으로 아파트 건설공사 등에 주로 이용되고 있다. 그러나 기존의 경량기포 콘크리트는 소포에 의한 체적감소, 과다한 균열 발생등의 문제점을 가지고 있는데 이를 보완하기 위해 콘크리트 제조에 사용되는 혼화재들을 첨가하여 특수한 특성을 가지는 경량기포 콘크리트용 개량분체가 개발되었다. 그러나 아직도 기포율 저감 및 균열방생등과 같은 문제점이 제기되고 있어 이를 보완하기 위한 연구가 필요한 실정이다. 따라서, 본 연구에서는 선행연구를 통한 개발된 경량기포 콘크리트의 실무적용 가능성에 대하여 분석하고자 실구체로 상정한 모의부재를 제작 후 경량기포 콘크리트를 타설하여 이들의 제반 공학적 특성을 분석함으로써 실용화 가능성을 검토하였는데, 그결과는 다음과 같다. 각종 재료가 혼입된 개량분체인 플레인은 약 230mm의 플로우치를 보여 목표 플로우치를 만족하였고, 100mm부재에서 약 4mm의 침하가 일어나 OPC에 비하여 약 2배의 침하깊이 감소효과를 나타냈다. 강도면에서는 OPC가 가장 높은 강도로 나타났으나, 세 수준 모두 KS기준 0.5품의 규정치를 상회하는 강도이었다. 건조수축 균열에 대한 부재균열 분석으로써 플레인은 약 0.1mm정도로 건조수축 균열에 매우 우수한 것으로 나타났다.

• 한국토양비료학회지
• /
• 제17권3호
• /
• pp.283-288
• /
• 1984

동계(冬季)에 볏짚, 왕겨와 인축분뇨(人畜糞尿)를 원료(原料)로하여 재료별(材料別)로 퇴적(堆積)하고 부숙과정(腐熟過程)에서 발생(發生)되는 퇴비온도(堆肥溫度) 및 퇴비성상(堆肥性狀)의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 1. 볏짚, 왕겨 1:1 혼합구(混合區)가 볏짚 단용구(單用區)에 비(比)하여 퇴비부숙발열기간(堆肥腐熟發熱期間)이 연장(延長)되었다. 2. 인산첨가구(燐酸添加區)의 퇴비온도(堆肥溫度)는 대조구(對照區)에 비(比)하여 발효초기(醱酵初期)에는 급격(急激)히 상승(上昇)하였으나 발효(醱酵) 30일(日) 이후(以後)에는 낮아지는 경향(傾向)이었다. 3. pH는 발효초기(醱酵初期)에 5.5이었으나 퇴비온도(堆肥溫度)의 급상승(急上昇)과 더불어 10일경(日傾)에 8.8까지 올라갔으며 30일 이후(日以後)부터는 거의 변화(變化)가 없었다. 4. 퇴비온도(堆肥溫度)가 $30{\sim}65^{\circ}C$로 유지(維持)되는 기간(其間)은 볏짚+계분구(鷄糞區)가 39일(日), 볏짚+왕겨+계분구(鷄糞區)가 69일(日), 볏짚+왕겨+돈분구(豚糞區)가 56일(日), 볏짚+왕겨+우분구(牛糞區)가 66일(日), 볏짚+왕겨+인분구(人糞區)가 21일(日)로서 볏짚+왕겨+계분구(鷄糞區)가 가장 길었다.