• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.85-90
• /
• 1994

The flow properties of binder latices for paper coating were investigated, together with dynamic viscoelastic properties of latex films and electron micrographs of latices, under various conditions. The amphoteric latex, binder pigment latex and anionic latex were used in this work. The amphoteric latex has both anionic and cationic functional group on its surface. The binder-pigment with a core-shell structure has dual functions : plastic pigment and binder. The low shear viscosity of binder latices and clay slurry were measured with Brookfield vis cometer. At low-shear rates. the viscosity decreased with increasing particle size of latex. On the amphoteric latex surface, the carboxyl groups are assumed to be fully dissociated over the region of pH 9~12, but the density of negative groups seems to be increased because of the gradual decrease in the degree of dissociation of amino groups. Since the apparent particle size of latex increases with surface charge, the electroviscous effect can be observed. On the anionic latex surface, the charge density is assumed to be nearly constant above pH 8. However, below pH 8 the coagulation of particles could be observed probably because of the decrease in the charge density.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.19-26
• /
• 2020

The previous study reported that the quaternary copolymer of MMA, BA, MAA, and NEA was expected to be a good monomer composition for a binder polymer with good rubbing fastness for digital textile printing(DTP) pigment ink. However, the rubbing fastness of the dyed fabric with the quaternary copolymer binder containing pigment ink is not enough to be commercially used. Therefore, this study aims to optimize MMA:BA:MAA:NEA composition for improved rubbing fastness. And the binder polymer with various MMA:BA:MAA:NEA compositions were synthesized using miniemulsion polymerization. The particle size, viscosity, molecular weight, and Tg of the synthesized binder were evaluated. And the color strength and rubbing fastness of the black pigment ink dyed cotton fabrics with the prepared binders were also evaluated. Then, the stiffness of undyed and dyed cotton fabrics were evaluated to investigate the changes in touch as the binder structure changes.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.256-263
• /
• 2018

The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with $-41.90^{\circ}C$ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.226-231
• /
• 2020

This study investigated effect of particle sizes of polymer binders for digital textile printing(DTP) pigment inks on touch of fabrics. The polymer binders were synthesized via miniemulsion polymerization of methyl methacrylate(MMA), butyl acrylate(BA), N-ethylolacrylamide(NEA) and methacrylic acid(MAA). The prepared binders were applied to black pigment inks and those black pigment inks were used to dye cotton fabrics. Then, color strength, rubbing fastness, stiffness, surface and bending properties of the dyed fabrics were investigated. Depending on the particle size of the polymer binder used, color strength, friction fastness, stiffness, surface and bending properties change. Generally, the larger the particle size of the polymer binder, the softer properties.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.77-87
• /
• 2019

To improve rubbing fastness of the printed fabrics, the binder polymers for Digital Textile Printing(DTP) pigment inks were synthesized with miniemulsion polymerization using various acrylic monomers, which are MMA(Methyl methacrylate), BA(Butyl acrylate), and Self-crosslinking monomers, such as NEA(N-Ethylol acrylamide) and MAA (Methacrylic acid). The acrylic monomer compositions were varied when synthesizing the binder polymers and their particle size distributions, average molecular weights, and Tgs were investigated. The prepared binder polymers were applied to prepare Cyan, Black, Yellow and Magenta pigment ink for DTP and the prepared inks were used to dye cotton fabrics. Then, color strength, and rubbing fastness were also investigated to study the effect of the comonomer compositions of the binder polymer on the color strength and rubbing fastness of the resulting pigment inks.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.90-99
• /
• 2011

The aim of this study is to develope eco-printing method using natural pigments and chitosan as a natural binder. Three chitosans with different molecular weights were employed to find appropriate conditions including chitosan concentration and pigment/binder ratio. Dye uptake, color and fastnesses of the printed fabrics were evaluated to find optimum conditions within the range of experiments carried out in this study. The effectiveness of chitosan as a printing binder was examined in comparison with color, dye uptake, and fastnesses of conventional synthetic binder and guar gum. It was found that chitosans with low or medium molecular weight were appropriate. Using low molecular weight chitosan, optimum concentrations were 1.7% for charcoal, madder and chlorophyll, whereas 2.2% for ocher, yellow soil, indigo and cochineal. Regardless of molecular weight and concentration of chitosan, the color fastnesess of fabrics printed with mineral pigments were superior to those of the fabrics printed with plant and animal pigments. As pigment/chitosan ratio became higher, rubbing fastness was decreased by 1-3 grade. The colorfastness of printed fabric with chitosan binder was similar to that with synthetic binder, which was higher than that with guar gum.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.10-19
• /
• 2022

Humectants are chemical compounds which added to water based pigment inks for DTP (Digital Textile Printing) to prevent evaporation of water. The humectants usually have diol or triol type chemical structures and their -OH groups have possibility to react with functional groups of the binder polymers, such as ester, carboxylic acid, and urethane groups, acting as a crosslinking agent. The crosslinking reactions between polymer binders and humectants in inks can affect touch of the printed fabrics. In this regard, this study aims to investigate effect of chemical structures and added amounts of humectants in pigment ink on touch of dyed fabrics by using 1,6-hexanediol, ethylene glycol, diethylene glycol, and 1,4-buthanediol with various amounts added to the mixture of a black pigment and a polyurethane type binder. Then, color, rubbing strength, touch of the fabrics dyed with the prepared pigment inks were evaluated.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04a
• /
• pp.1-6
• /
• 1999

A study was made to determine the effect of plastic pigment on the coating structure and printability of coated paper. Three basic plastic pigments were investigated such as solid-bead type of plastic pigment, binder type of plastic pigment and hollow type of plastic pigment. In the systems investigated, it was observed that particle shape and structure of plastic pigment had influenced on the rheology of coating color, the state of packing, and the properties of coated paper. The materials investigated were restricted to plastic pigments commonly uesd in paper coating formualtion. Inorganic pigments used in this research were kaolin clay which is platelets and calcium carbonate which is rhombic. Three kinds of plastic pigments were blended in the color made up with two inorganic pigments, respectively. The combination of pigments were carried out (1) to determined the effect of paticle structure of plastic pigment on the state of dispersion of coating color, (2) to observe the effect of temperature of calender on the property of coated paper prepared with plastic pigment. The data indicated that binder and hollow type of plastic pigment had the best results on improving the properties of coated paper such as paper gloss, opacity and air permeability ect. and solid-bead type of plastic pigment in the next place.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.3
• /
• pp.32-38
• /
• 2000

This study was carried out to determine the effect of the type of plastic pigment on the coat-ing structure and printability of coated paper. Three kinds of plastic pigments(solid-bead type binder type and hollow type) were used for hti purpose. IN this research it was observed that particle shape and structure of plastic pigment had influenced the rheology of coating color the state of packing and the properties of coated paper. Inorganic pigments used in this research were platelike kaolin clay and rhombic calcium carbonate. Three kinds of plastic pigments were blended with two inorganic pigments respec-tively. The combination of pigments were carried out(1) to determined the effect of particle structure of plastic pigment on the state of dispersion of coating color(2) to observe the effect of calendering temperature on the property of coated paper prepared with different plastic pigments. The data indicated that binder and hollow type plastic pigment gave the best results in improving the properties of coated paper such as paper gloss opacity and air pet-meability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.8-12
• /
• 2009

According to a previous study, talc as a coating pigment can improve the viscosity and the water retention of coating color, the compressibility of coating layer, and hence gravure printability. Talc is also well known for its larger particle size than other pigments, which implies that less binder may be need due to its smaller specific surface area. This study investigated the possibility of reducing binder content for matte grade paper. Coating color was prepared with the Cotalc-2000, which showed the best properties in the previous study. The binder content was varied and the effect of binder content on the physical properties of coated paper and the gravure printability was investigated. It was shown that binder content could be reduced when talc was used as a coating pigment. The reduction in binder content did not influence gloss, roughness and the print density of coated paper but showed improvement in paper porosity, compressibility and missing dot.