• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.61-69
• /
• 2021

In this study, scale down model bridge piers were fabricated and non-destructive experiments conducted with an impact load to determine scours in the ground adjacent to the bridge piers using the natural frequency of the bridge piers. Three scale-model bridge piers with different heights were fabricated, and they penetrated the ground at a depth of 0.35 m. The scours around the bridge piers were simulated as a side scour and foundation scour. The experiments were conducted in 13 steps, in which scouring around the model bridge piers was performed in 0.05 m excavation units. To derive the natural frequency, the impact load was measured with three accelerometers attached to the model bridge piers. The impact load was applied with an impact hammer, and the top of the model bridge pier was struck perpendicularly to the bridge axis. The natural frequency according to the scour progress was calculated with a fast Fourier transform. The results demonstrated that the natural frequency of each bridge pier tended to decrease with scour progress. The natural frequency also decreased with increasing pier height. With scour progress, a side scour occurred at 70% or higher of the initial natural frequency, and a foundation scour occurred at less than 70%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.4-5
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.320-321
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.333-334
• /
• 2005

• Proceedings of the Korea Water Resources Association Conference
• /
• 1999.05a
• /
• pp.657-662
• /
• 1999

• Journal of Korea Water Resources Association
• /
• v.32 no.1
• /
• pp.41-47
• /
• 1999

More than 100 bridges in Korea have been annually collapsed or badly damaged by the scouring around bridge piers, particularly in the flood season. To prevent from such a tragedy, the fundamental study on the bridge scouring is required, which is essential not only to estimate the scour depth with reliability but to take it into consideration in its design. However, it is not easy to find out the physical scour mechanism since many factors on the scour are coupled with. Moreover, there exists none of the measured data sufficiently for the primary research on the bridge scour depths. In this study the field measurements are carried out to provide the fundamental data for the research and the design. Scouring depth, pier width, flow depth, and the approaching velocity and degree of pier nose are measured broadly in small and medium streams. From these measurements the present situation on bridge scours can be understood and some of important factors to affect the stability of bridges are analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.349-356
• /
• 2021

Since the 1960s, traffic infrastructure, such as bridges, has increased rapidly in Korea as urbanization and industrialization progressed due to economic growth. As the scale of the bridge becomes larger, stability analysis of the superstructure of the bridge is being conducted actively, but scour stability analysis for the substructure of the bridge has not been conducted sufficiently. This study is a basic investigation to prevent large-scale disasters caused by scouring in bridge piers. A simple linear regression model was used to analyze the scour depth calculated through seventeen scour depth calculation formulae, and the scour depth measured through hydraulic model experiments. As a result, the Coleman (1971) formula was the best method among the scour depth calculation formulae, and the Froehlich (1987) formula was the most effective method for calculating the scour depth. In addition, a review using a simple regression model confirmed that the scour depth calculation formulae of CSU (1993), Coleman (1971), and Froehlich (1987) can predict a similar scour depth by reflecting domestic stream characteristics. This study can calculate the scour depth reflecting the environmental conditions of Korea in future stream design.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.3
• /
• pp.5-13
• /
• 2001

세립토에서의 세굴깊이의 발달은 일반적으로 조립토에서보다는 아주 천천히 진행된다. 조립토를 위해 개발된 방법을 시간효과와 무관하게 세립토에 적용한다면 세굴깊이가 과대하게 평가된다. SRICOS 방법은 점성토 또는 연암에 설치된 교각의 국부세굴깊이의 변화를 예측하기 위해 개발되었으며, 교량현장에서 채취한 흙에 대한 실험과 SRICOS 프로그램의 수행을 병행함으로써 적용된다. 본 논문에서는 SRICOS 방법을 간단히 설명한 후 프로그램의 세부적인 내용을 기술한다. 또한 이 프로그램을 이용하여 세굴에 미치는 각 매개변수의 영향을 평가하기 위해 실시한 매개변수 해석의 결과가 포함된다.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.845-854
• /
• 2008

The old bridge of Woljeong-gyo, which has the fluvial history and culture, represents the ancient construction and civil engineering techniques. It is the oldest stone bridge in Korea and currently restored with its vicinities. In this study, the experimental model was used to analyze the hydraulic characteristics, the local pier-scour depth without scour protection, and the stability of riprap protection using the old grid type panels and stones for Woljeong-gyo of the study area. The water levels were increased around 30cm due to the restored bridge piers and foundations and the effects went up to 200m upstream. The maximum scour depth of 5.4m was measured and the scour protection tests were performed with the riprap size calculated using empirical equations and the existing scour protection range. The riprap of the existing scour protection in the upstream side was broken away, while the riprap of extended scour protection was very stable for the design flood condition of Woljeong-gyo area.

• Structural Monitoring and Maintenance
• /
• v.1 no.2
• /
• pp.183-195
• /
• 2014

Scour is one of the leading causes of overwater bridge failures worldwide. While monitoring systems have already been implemented or are still being developed, they suffer from limitations such as high costs, inaccuracies, and low reliability, among others. Also, most sensors only measure scour depth at one location and near the pier. Thus, the objective is to design a simple, low cost, scour hole topography monitoring system that could better characterize the entire depth, shape, and size of bridge scour holes. The design is based on burying a robust, waterproofed, piezoelectric sensor strip in the streambed. When scour erodes sediments to expose the sensor, flowing water excites it to cause the generation of time-varying voltage signals. An algorithm then takes the time-domain data and maps it to the frequency-domain for identifying the sensor's resonant frequency, which is used for calculating the exposed sensor length or scour depth. Here, three different sets of tests were conducted to validate this new technique. First, a single sensor was tested in ambient air, and its exposed length was varied. Upon verifying the sensing concept, a waterproofed prototype was buried in soil and tested in a tank filled with water. Sensor performance was characterized as soil was manually eroded away, which simulated various scour depths. The results confirmed that sensor resonant frequencies decreased with increasing scour depths. Finally, a network of 11 sensors was configured to form a distributed monitoring system in the lab. Their exposed lengths were adjusted to simulate scour hole formation and evolution. Results showed promise that the proposed sensing system could be scaled up and used for bridge scour topography monitoring.