• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.355-365
• /
• 2014

Concrete-filled tubes (CFTs) have been used in civil engineering practices as a column of buildings and a bridge pier. CFTs have several advantages over the conventional reinforced concrete columns, such as rapid construction, enhanced buckling resistance, and inherited confinement effect. However, CFT component have not been widely used in civil engineering practice, since the design provisions among codes significantly vary each other. It leads to conservative design of CFT component. In this study, the design provisions of AISC and EC4 for CFT component were examined, based on the extensive test results conducted by previous researchers and finite element analysis results obtained in this study. Especially, the focus was made on the validation of P-M interaction curves proposed by AISC and EC4. From the results, it was found that the current design codes considerably underestimated the strength of CFT component under general combined axial load and bending. Finally, the modified P-M interaction curve was proposed and successfully verified.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.213-222
• /
• 1999

Elastic-plastic methods have been used for the better prediction of the actual behavior of continuous-composite plate girder bridges in the overload and maximum load analysis. The structural evaluation using ALFD(Alternate Load Factor Design) uses the elastic-plastic analysis. The plastic rotations that remain after the load is removed can be occurred by the yielding locations of the maximum moment section. This situation can occur due to the residual stresses even if the moment is below the theoretical yield moment. The local yielding causes positive automoments that assure elastic behavior under subsequent overloads. In this study, the automoments at the piers occurred due to the unit plastic rotations and other locations were calculated by the conjugate-beam method and three-moment equation, using the nine design span with progressively smaller pier sections. The automoments were determined by the developed computer programs in this study in which the moments and plastic rotations from the continuity and moment-inelastic rotation relationships must be equal. And also the ratings of 3-span continuous composite plate girder bridges with non-compact section were carried out according to the Korean Highway Bridge Specification.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1737-1741
• /
• 2008

하천 개수나 치수를 위한 기초 연구의 일환으로 수치모형을 이용한 검증 및 예측 과정이 요구되어 왔고, 고전적인 수치모의 방법으로 결과 산출이 용이한 1차원 모형을 적용시켜 왔다. 1차원 모형의 경우 모의영역을 쉽게 넓힐 수 있고, 입력 자료가 간단하다는 장점이 있지만, 수직적이고 수평적인 흐름특성 변화 및 난류 구조를 보이는 3차원적인 자연하천 흐름을 종방향의 1차원적인 모의 결과를 이용하여 평가한다는 점에서 비현실적이다. 하천을 가로질러 교각이나 보와 같은 구조물이 위치하고 있거나, 좌우 비대칭적인 형상의 수로를 모의할 경우 흐름특성의 공간적인 분포는 단순한 단면 평균적인 개념으로는 설명되기 힘들다. 최근에야 비로소 수공학 관련 실무자들에 의해서 최소한 2차원 수치모형을 기본적인 평가법으로 도입해야 한다는 분위기가 감지되고 있으며, 일반적으로 한강과 같은 대하천을 모의할 경우, 대다수의 실무자들과 연구자들이 축척을 문제 삼아 수로 내부에 위치한 교각을 생략하여 2차원 모의를 수행하기도 한다. 따라서 본 연구에서는 수로 내부에 위치한 교각을 2차원 모의하는 방법에 대한 비교 평가를 수행하고자 한다. 동일한 격자를 이용하여 교각을 고려하지 않았을 경우와 교각 형상을 모의 영역에서 삭제하여 경계처리를 하였을 경우, 마지막으로 교각이 위치하고 있는 영역에 항력을 적용하였을 경우에 대해서 비교 평가한다. 이를 위하여 2차원 천수방정식을 흐름방정식으로 하는 유한요소모형을 구축하였으며, 모형의 검증을 위해 교각이 수로에 위치할 경우에 대한 실내 실험 자료와 비교한다. 또한 검증된 모형을 이용하여 교각이 포함된 한강의 일부 구간을 선정하여, 교각 모의 방법에 대한 비교 평가를 수행한다. 본 연구에서 구축된 자료 및 제시된 수치모형은 하천복원, 치수관리 측면에서 매우 유용하게 사용될 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.41 no.4
• /
• pp.445-454
• /
• 2008

Many countermeasures for local scour at bridge piers constructed on the river and sea have been developed and researched to protect piers against local scour. The most commonly employed method is riprap protection, which is sometimes required the filter installation between riprap and base layers. However, the construction of stone filters are really hard to perform in the field, require the high cost, or sometimes are impossible. The experimental modeling is conducted to analyze the riprap failure modes and the stability of riprap protection without filters based on the different approach velocity and riprap layer thickness conditions. Also, the stability index to evaluate the performance of riprap protection is developed using the experimental results. The cover and thickness of the riprap layer play a very important role in the stability and thicker riprap layers can prevent a total disintegration of the riprap layer effectively, especially due to winnowing failure.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.625-635
• /
• 1997

The base isolation technique and its benefits in reducing the transmitted earthquake energy into a structure have gained increasing recognition during the last two decades. Unfortunately, the current available design procedures, especially for base-isolated bridges, seem inadequate and too restrictive. As a result, practical design procedure still relies upon a series of deterministic time history analyses. In this study, the evaluation of the possibility of the normal mode method to predict the nonlinear seismic responses of base isolated bridges has been performed. The applicability has been examined through the numerical approach with isolator's elastic or plastic states of the base isolated bridges. Numerical results show that the 1st. mode period and the various responses are varied with the state but are conversed. And, the result show that the normal mode method is applicable to predict the seismic responses and to design the babe isolated bridge. Various analysis method to bridges with bilinearized hysteresis isolator and various pier heights are evalulated.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• Earthquakes and Structures
• /
• v.22 no.3
• /
• pp.245-261
• /
• 2022

Key questions to researchers interested in nonlinear analysis of skeletal structures are whether the distributed plasticity approach - albeit computationally demanding - is more reliable than the concentrated plasticity to adequately capture the extent and severity of the inelastic response, and whether force-based formulation is more efficient than displacement-based formulation without compromising accuracy. The present research focusing on performance-based seismic response of mid-span concrete bridges provides a pilot holistic investigation opting for some hands-on answers. OpenSees software is considered adopting different modeling techniques, viz. distributed plasticity (through either displacement-based or force-based elements) and concentrated plasticity via beam-with-hinges elements. The pros and cons of each are discussed based on nonlinear pushover analysis results, and fragility curves generated for various performance levels relying on incremental dynamic analyses under real earthquake records. Among prime conclusions, distributed plasticity modeling albeit inherently not relying on prior knowledge of plastic hinge length still somewhat depends on such information to ensure accurate results. For instance, displacement-based and force-based approaches secure optimal accuracy when dividing, for the former, the member into sub-elements, and satisfying, for the latter, a distance between any two consecutive integration points, close to the expected plastic hinge length. On the other hand, using beam-with-hinges elements is computationally more efficient relative to the distributed plasticity, yet with acceptable accuracy provided the user has prior reasonable estimate of the anticipated plastic hinge length. Furthermore, when intrusive performance levels (viz. life safety or collapse) are of concern, concentrated plasticity via beam-with-hinges ensures conservative predicted capacity of investigated bridge systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.411-419
• /
• 2006

In this study, a new approach employing 3-dimensional strut-tie models for analysis and design of 3-dimensional structural concrete with disturbed regions that are not properly occupied by current design codes is proposed. In addition, a computer graphics program for the practical application of the approach is developed. The approach adopts a grid strut-tie model to exclude the subjectivity in the selection of strut-tie model and evaluates the effective strength of concrete strut by considering the 3-dimensional failure criteria of concrete and the deviation angles between the struts and compressive principal stress trajectories. To verify the appropriateness of the approach, nine pile caps tested to failure are analyzed and a bridge pier is designed. The analysis and design results are compared with those obtained by several different methods.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.192-207
• /
• 2018

The Hyangwonjeong and Chwihyanggyo located in the back garden of Gyeongbokgung Palace have mainly been investigated by referring to historical records about the reign of King Gojong and various drawings thought to have been made in the late Joseon period. Because the current Chwihyanggyo was rebuilt temporarily after being burned to the ground during the Korean War, its form and the location of its reconstruction are not grounded on any accurate historical investigation. Although there are some photos of the Chwihyanggyo that were taken between the end of the Joseon period and the Japanese colonial era, there is no information about the photographer or when they were taken, and it is hard to see which photos show the original Chwihyanggyo Bridge with them. The Cultural Heritage Administration, which is currently promoting the restoration of the Chwihyanggyo, has recognized this problem and initiated research on the matter. In 2017, an excavation survey successfully identified the original location of the Chwihyanggyo, as well as that of Hyangwonji Gado (假島), and the shape of the first foundation stone in the pier. With these findings it was possible to infer the ways in which the Chwihyanggyo has changed over the years. Moreover, by measuring the AMS (Accelerator Mass Spectrometer) of the samples collected in the mounding layer of the Gado where the Hyangwonjeong is located, it was discovered that the Hyangwonjeong was constructed sometime after the Imjin waeran (Japanese Invasion of Korea in 1592), which means that the theory that 'the late Joseon Hyangwonjeong was not the former early Josenn Chwirojeong' is groundless. Judging by the materials found to date, we can reasonably assume that the Chwihyanggyo and Hyangwonjeong must have been built around the same time that Geoncheonggung Palace was founded in the late Joseon period.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.119-131
• /
• 2024

Pulse-like ground motion can cause greater damage to structures than nonpulse-like ground motion. Currently, much research is being conducted to determine the presence or absence of velocity pulses and to quantify them from seismic-acceleration records. Existing ground motion is divided into far-field (FF) and near-fault ground motion, based on the distance of the measurement point from the fault. Near-fault ground motion is further classified into near-fault pulse-like (NFP) and near-fault nonpulse-like (NFNP) ground motion by quantifying the presence or absence of velocity pulses. For each ground motion group, 40 FF, 40 NFP, and 40 NFNP ground motions are selected; thus, 120 ground motions are used in the seismic analysis to assess the seismic fragility of sample bridges. Probabilistic seismic demand models (PSDMs) are created by evaluating the seismic responses of two types of sample bridges with lead-rubber and elastomeric rubber bearings using three groups of ground motions. Seismic fragility analysis is performed using the PSDM, and from these results, the effect of the presence or absence of seismic velocity pulses on the seismic fragility is evaluated. From the comparison results of the seismic fragility curve, the seismic fragility of NFP ground motion appears to be approximately three to five times greater than that of NFNP ground motion, according to the presence or absence of a velocity pulse of seismic waves. This means that the damage to the bridge is greater in the case of NFP ground motion than that in the case of NFNP ground motion.