• 전산구조공학
• /
• 제10권4호
• /
• pp.251-265
• /
• 1997

해양계선시스템(offshore mooring system)의 거동을 구분적선형시스템(piecewise-linear system)을 이용하여 분석하였다. 계선시스템의 복원력을 유도하고 거기에 상응하는 근사치 구분적선형시스템의 복원력을 구하여 두 시스템의 복원력을 비교하였다. 다양한 파력 하에서의 계선시스템의 응답거동을 분석하였다. 시스템의 비선형정도 및 매개변수의 영향에 대하여 집중적으로 연구하였다. 시스템의 응답거동의 특성은 포인케어맵(Poincare map)을 통하여 확인하였다. 구분적선형시스템을 이용하여 분석한 결과, 계선시스템은 일반 조화, 열조화 및 복잡한 비선형거동인 chaos를 포함한 다양한 응답거동을 갖음을 알아냈다. 여러 값의 매개변수를 적용하여 시스템의 응답거동에 미치는 영향을 알아냈으며, 매개변수지도를 통하여 응답거동의 영역을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.533-533
• /
• 2000

Stabilization of piecewise-linear systems with unknown switching information is presented. The current subsystem is identified from the output, and the identified subsystem is used for the observer-based control. The stability of the overall system is proven and the performance is evaluated via a simulation.

• Kyungpook Mathematical Journal
• /
• 제52권4호
• /
• pp.459-472
• /
• 2012

A piecewise smooth system is characterized by non-differentiability on a curve in the phase space. In this paper, we discuss particular bifurcation phenomena in the dynamics of a piecewise smooth system. We consider a two-dimensional piecewise smooth system which is composed of a linear map and a nonlinear map, and analyze the stability of the system to determine the existence of dangerous border-collision bifurcation. We finally present some numerical examples of the bifurcation phenomena in the system.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.327-334
• /
• 2011

Single-phase power factor correction (PFC) converter circuits are non-linear systems due to the contribution of their multiplier. This non-linearity causes difficulties in analysis and design. Models that reduce the system to a linear system involve considerable approximation, and produce results that are susceptible to instability problems. In this paper a piecewise affine (PWA) system is introduced for describing the nonlinear averaged model. Then robust output feedback controllers are established in terms of the linear matrix inequality (LMI). Simulation and experiments results show the effectiveness of the proposed control method.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.133-136
• /
• 2004

This paper proposes a stability condition in affine Takagi-Sugeno (T-S) fuzzy systems with parametric uncertainties and then, introduces the design method of a fuzzy-model-based controller which guarantees the stability. The analysis is based on Lyapunov functions that are continuous and piecewise quadratic. The search for a piecewise quadratic Lyapunov function can be represented in terms of linear matrix inequalities (LMIs).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.2012-2015
• /
• 2002

Synchronization phenomena of chaos observed in a dual-structured system is presented. The system is consisting of two identical piecewise-linear systems and the simple coupling between the two systems enables the synchronization of the chaotic behavior. An application of the proposed dual-structure to a real power system for the parameter value identification is also presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.461-467
• /
• 2000

Mechanical problems are basically three dimensional nonlinear dynamic problems, which makes it difficult to solve. The difficulties are tried to overcome by modeling, i.e., simplifications of the system with the assumptions or negligence of minute effects. However, the correctness or usefulness of the model should be verified through the comparison with experimental results, which is the process of physical understanding of the system. The understanding of physics of the system make it possible to design or operation of the system. The effects of clearance and friction are always difficult problems in mechanical system due to its nonlinearity. The nonlinearity comes from piecewise-linear characteristics of the stiffness and damping of the system. The modeling of piecewise-linearity and the experimental result are discussed in this paper for impact and friction oscillator and rotor rubbing problem, which is the combination of impact and friction problems.

• Kyungpook Mathematical Journal
• /
• 제60권2호
• /
• pp.401-413
• /
• 2020

In this article we consider the following system of piecewise linear difference equations: x_n+1 = |x_n| - y_n - 1 and y_n+1 = x_n + |y_n| - 1. We show that when the initial condition is an element of the closed second or fourth quadrant the solution to the system is either a prime period-3 solution or one of two prime period-4 solutions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.33.1-33
• /
• 2001

We address a novel approach to identify a nonlinear dynamic system for Wiener models, which are composed of a linear dynamic system part followed by a nonlinear static part. The aim of system identification here is to provide the optimal mathematical model of both the linear dynamic and the nonlinear static parts in some appropriate sense. Assuming the nonlinear static part is invertible, we approximate the inverse function by a piecewise linear function. We estimate the piecewise linear inverse function by using the evolutionary computation approach such as genetic algorithm (GA) and evolution strategies (ES), while we estimate the linear dynamic system part by the least squares method. The results of numerical simulation studies indicate the usefulness of proposed approach to the Wiener model identification.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.1122-1127
• /
• 2003

Typical application of detecting piecewise-linear curves includes vectorizing of scanned drawings whirh is a vital step in installing any geographic information system. This paper considers the problem of optimally approximating a piecewise linear curve to a set of digital points while satisfying given intersection angles between each pair of neighboring lines. The criterion for optimality is to minimize the sum of squared deviations. The problem is formulated as an unconstrained nonlinear programming model. An algorithm which guarantees an optimal solution is then proposed and its validity is tested with both a synthetically generated image and a real image. The test results illustrate the excellent performance of the proposed algorithm.