• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.397-398
• /
• 2009

본 논문에서는 증강현실 환경에서 다중 시스템의 물리 시뮬레이션을 위한 동기화 방법을 제안한다. 증강현실 시스템의 몰입감 증대를 위하여 가상 객체에 물리 법칙에 기반을 둔 실질적인 움직임을 부여하는 방법을 논하고 이를 네트워크로 확장하기 위하여 물리 기반 증강현실 환경의 동기화 방법을 연구하였다. 이러한 연구를 통하여 증강현실 어플리케이션의 몰입감 증대와 네트워크 게임에서의 증강현실 도입이라는 새로운 방향도 제시 할 수 있을 것이다.

• Radiation Oncology Journal
• /
• v.38 no.1
• /
• pp.68-76
• /
• 2020

Purpose: The present study was conducted to compare dosimetric parameters for the heart and left lung between free breathing (FB) and deep inspiration breath hold (DIBH) and determine the most important potential factors associated with increasing the lung dose for left-sided breast radiotherapy using image analysis with 3D Slicer software. Materials and Methods: Computed tomography-simulation scans in FB and DIBH were obtained from 17 patients with left-sided breast cancer. After contouring, three-dimensional conformal plans were generated for them. The prescribed dose was 50 Gy to the clinical target volume. In addition to the dosimetric parameters, the irradiated volumes and both displacement magnitudes and vectors for the heart and left lung were assessed using 3D Slicer software. Results: The average of the heart mean dose (D_mean) decreased from 5.97 to 3.83 Gy and V₂₅ from 7.60% to 3.29% using DIBH (p < 0.001). Furthermore, the average of D_mean for the left lung was changed from 8.67 to 8.95 Gy (p = 0.389) and V₂₀ from 14.84% to 15.44% (p = 0.387). Both of the absolute and relative irradiated heart volumes decreased from 42.12 to 15.82 mL and 8.16% to 3.17%, respectively (p < 0.001); however, these parameters for the left lung increased from 124.32 to 223.27 mL (p < 0.001) and 13.33% to 13.99% (p = 0.350). In addition, the average of heart and left lung displacement magnitudes were calculated at 7.32 and 20.91 mm, respectively. Conclusion: The DIBH is an effective technique in the reduction of the heart dose for tangentially treated left sided-breast cancer patients, without a detrimental effect on the left lung.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.28-38
• /
• 2012

The characteristics of vibration and noise of a compressor used for electric appliances have significant influence on the quality of the products. For improvement on the quality of electric appliances, investigations for understanding the dynamic behaviour of the compressor are essential. Since Virtual Lab for the dynamics model and MAXWELL for the electromagnetics model are separate software programs with no interface, the joint simulation of the models could not be performed. This study suggests a way to develop the compressor model capable of the joint simulation with MATLAB/SIMULINK linking a flexible multi-body dynamics model, a torque model, and an electricity control model. The compressor model is found to be able to perform I/O data transfer among the sub-models and joint simulation. The simulation results of the flexible body and rigid body dynamics models were compared to check availability of the joint simulation system. In addition, the simulated vibration and driving torque of the compressor mechanisms were compared with measurements. Through the simulations, the influence of springs and LDT on the dynamic behaviour of the compressor was examined. This study examines the influence of the dynamic behaviour of the compressor mechanisms through joint simulation of the flexible multi-body dynamics model and electromagnetic circuit allows analysis.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4798-4808
• /
• 2022

The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.189-195
• /
• 2003

The comparative analysis of a portal image and a simulation image is a very important process in radiotherapy for verifying the accuracy of an actual treatment field. In this study, we applied a chamfer-matching algorithm to compare a portal image with a simulation image and verified the accuracy of the algorithm to analyze the field matching error in the portal image. We also developed an analysis program that could analyze the two images more effectively with a chamfer-matching method and demonstrated its efficacy through a feasibility study. With virtual portal images, the accuracy of the analysis algorithm were acceptable considering the average error of shift (0.64 mm), rotation (0.32$^{\circ}$), and scale (1.61%). When the portal images of a head and neck phantom were analyzed, the accuracy and suitability of the developed analysis program was proven considering the acceptable average error of shift (1.55 mm), rotation (0.80$^{\circ}$), and scale (1.72%). We verified the applicability of a chamfer-matching algorithm to the comparative analysis of a portal image with a simulation image. The analysis program developed in this study was a practical tool to calculate the quantitative error of the treatment field in a portal image.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.44-48
• /
• 2013

For a successful commercialization of microbolometer, it is required to develop a robust package including thermal stabilizing mechanism. In order to regulate the temperature within some operating range, thermoelectric cooler is generally used but it's not easy to model the whole package due to the coupled physics nature of thermoelectric cooler. In this paper, SPICE-compatible modeling methodology of a microbolometer package is presented, whose steady-state results matched well with FEM results at the maximum difference of 5.95%. Although the time constant difference was considerable as 15.7%, it can be offset by the quite short simulation time compared to FEM simulation. The developed model was also proven to be useful for designing the thermal stabilizer through parametric and transient analyses under the various working conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.41.1-41.1
• /
• 2015

Hierarchical galaxy formation models under LCDM cosmology predict that the most massive structures such as galaxy clusters (M > $10^{14}M_{\odot}$) appear late (z < 1) in the history of the universe through hierarchical clustering of small objects. Galaxy formation is also expected to be accelerated in overdense environments, with the star formation rate-density relation to be established at z ~ 2. In this talk, we present our search of massive structures of galaxies at 0.7 < z < 4, using the data from GOODS survey and our own imaging survey, Infrared Medium-deep Survey (IMS). From these studies, we find that there are excess of massive structures of galaxies at z > 2 in comparison to the Millennium simulation data. At 1 < z < 2, the number density of massive structures is consistent with the simulation data, but the star formation history is more or less identical between field and cluster. The star formation quenching process is dominated by internal process (stellar mass). The environmental effect becomes important only at z < 1, which contributes to create the well known star formation-density relation in the local universe. Our results suggest that galaxy formation models under LCDM cosmology may require further refinements to match the observation.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.931-934
• /
• 2013

The weight calculation in an iterative algorithm is the most computationally costly task in computed tomography image reconstruction. In this letter, a fast algorithm to speed up the weight calculation is proposed. The classic square pixel rotation approximate calculation method for computing the weights in the iterative algorithm is first analyzed and then improved by replacing the square pixel model with a circular pixel model and the square rotation approximation with a segmentation method of a circular area. Software simulation and hardware implementation results show that our proposed scheme can not only improve the definition of the reconstructed image but also accelerate the reconstruction.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.911-918
• /
• 2009

Electromagnetic interference (EMI) is defined as the interaction phenomena of electromagnetic waves scattered from a large structure or complex terrain. In this study, the propagation of linear wave is modeled with ray theory, direct simulation Monte Carlo (DSMC), and some classical theories on flat plates. The wave physics of reflection, refraction, and diffraction are simulated for the investigation of front and back scattering of the one-dimensional plane wave from a tower with ray theory and DSMC, respectively. The effect of rotating disk idealized from the real wind-turbine blades is modeled with a simplified version of the classical electromagnetic theory as well as DSMC based on the ray theory.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1017-1021
• /
• 2015

Induction heating has been applied to the preheating process in various industrial fields. It has been used as a simple device structure, limiting the heating zone through controlled variables, and free-welding positions. It would be helpful to weld thick plates with arc welding such as GMAW. The induction heating process is well suited to this process. In this study, in order to find suitable induction heating parameters, a simulation was conducted with multi physics S/W. Three kinds of material were heated by induction coils designed specially for thick plate. Consequently, steel and nimonic alloy were the most efficient materials for preheating by induction. It can be concluded that the induction heating process is a good method for preheating the thick plate.