• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.569-572
• /
• 1998

The semiconductor technology for the deep submicron $regime(0.18\mu\textrm{m})$ and larger wafer $diameters(300\mu\textrm{m})$ has been increased its cost with each wafer. Hence, in order to reduce the number of characterization experiments of a new process, lithographic modeling is more important than it was. In this paper, we introduced a new method to extract Dill ABC parameters from the refractive index changes. In order to evaluate our exact method, results of experiments and calculations for several resists were compared with other methods〔1〕through the lithographic simulation.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2298-2304
• /
• 2023

Titanium alloys are expected to become one of the candidate materials for nuclear-powered spacecraft due to their excellent overall performance. Nevertheless, atomistic mechanisms of the defect accumulation and evolution of the materials due to long-term exposure to irradiation remain scarcely understood by far. Here we investigate the heavy irradiation damage in a-titanium with a dose as high as 4.0 canonical displacements per atom (cDPA) using atomistic simulations of Frenkel pair accumulation. Results show that the content of surviving defects increases sharply before 0.04 cDPA and then decreases slowly to stabilize, exhibiting a strong correlation with the system energy. Under the current simulation conditions, the defect clustering fraction may be not directly dependent on the irradiation dose. Compared to vacancies, interstitials are more likely to form clusters, which may further cause the formation of 1/3<1210> interstitial-type dislocation loops extended along the (1010) plane. This study provides an important insight into the understanding of the irradiation damage behaviors for titanium.

• Journal of The Korean Association For Science Education
• /
• v.18 no.2
• /
• pp.245-256
• /
• 1998

In this study, we discussed about the implications of the idealization, which take an important role in physics, to the physics education. First, understanding of the idealization help the physics learning itself. This is because that various types of idealizations are included in the physics terms and concepts, derivation processes of physics laws and formulas, and explanation of natural phenomena and problem solving activities. Second, understanding of the idealization can help the application of the physics world to the real world. That is, by understanding the extent and the limit of idealization used in physics world, physics students can understand the discrepancies between the real world and the physics world. And also, by modifying or eliminating the idealization, students can extend the extent of understanding about how predictions based on the idealization used in the physics world will change. To do this, we suggested the application of computer simulation program in physics laboratories. Third, idealization take an important role in the inquiry learning for students' originality. The activities of identifying or controlling the variables, as one of the principal factors of scientific inquiry, need the appropriate establishment of the ideal conditions. And to analyze the limiting case or practice the thought experiments for understanding the impossible situation in the real world, ideal conditions also are needed. This study discussed above three aspects with various concrete examples and, with Park et al.'s study (Park et al., 1998), present the theoretical basis for the study of students' and teachers' understanding the idealization.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.574-581
• /
• 2023

A scheme is proposed to generate triangular waveforms with alterable symmetry. The key component is a cascaded single-drive Mach-Zehnder modulator (SD-MZM) and optical polarization beam splitter-combiner architecture. In this triangular waveform generator, the bias-induced phase shift, modulation index and controllable delay difference are changeable. To generate triangular waveform signals with different symmetry indexes, different combinations of these variables are selected. Compared with the previous schemes, this generator just contains one SD-MZM and the balanced photodetector (BPD) is not needed, which means the costs and energy consumption are significantly reduced. The operation principle of this triangular waveform generator has been theoretically analyzed, and the corresponding simulation is conducted. Based on the theoretical and simulated results, some experiments are demonstrated to prove the validity of the scheme. The triangular waveform signals with a symmetry factor range of 20-80% are generated. Both experiment and theory prove the feasibility of this method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.872-876
• /
• 2006

This study was made to examine the electromagnetic interference(EMI) shielding effect (SE) of multilayered thin films in which indium-tin oxide(ITO) and Ag were deposited alternately from 3layer to 9 layer on Poly Methyl Meth Acrylate(PMMA) substrate at room temperature using a PF sputtering. We measured optical and electrical characteristics by UV-spectrometer and 4 point probe. The measurement of EMI SE in frequency range from 50MHz to 1.5GHz was performed by using ASTM D4935-89 method. We compared the measured EMI SEs with theoretical simulation data. We obtained relatively low resistivity and high transmittance from the EMI SE multilayers. In this study, we obtain good optical electrical characteristics with a minimun transmittance of about 60% at 550nm wavelength and sheet resistance of $2{\sim}3ohm/sq$., respectivity. Measured EMI SEs were over 50dB and similar to theoretical simulation data.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.56.1-56.1
• /
• 2017

The distribution of gas on cosmological scales is vital to our understanding of galaxy formation. Using the RAMSES cosmological hydrodynamical simulation code we have explored the evolution of the gas properties in a cosmological volume. We have identified the effect of the maximum simulation force resolution, and the resolution of the initial conditions, on the gas density power spectrum, as well as artefacts due to the RAMSES algorithm. The RAMSES methodology can add spurious power on small scales, particularly in low resolution simulations. This effect can be expected to have a strong impact on the results of RAMSES simulations, because this additional power appears at specific epochs, implying a sudden change to the system.

• Current Optics and Photonics
• /
• v.1 no.6
• /
• pp.626-630
• /
• 2017

GaN-based green light-emitting diode (LED) structures suffer from low internal quantum efficiency (IQE), known as the "green gap" problem. The IQE of LED structures is expected to be improved to some extent by exploiting the Purcell effect. In this study, the Purcell effect on the IQE of green LED structures is investigated numerically using a finite-difference time-domain simulation. The Purcell factor of flip-chip LED structures is found to be more than three times as high as that of epi-up LED structures, which is attributed to the high-reflectance mirror near the active region in the flip-chip LED structures. When the unmodified IQE is 20%, the relative enhancement of IQE can be greater than 50%, without utilizing the surface-plasmon coupling effect. Based on the simulation results, the "green gap" problem of GaN-based green LEDs is expected to be mitigated significantly by optimizing flip-chip LED structures to maximize the Purcell effect.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.43-48
• /
• 2013

In this paper, magnetic buoyancy force on nonmagnetic solid object submerged in magnetic liquid was simulated and measured. For the evaluation of the force, a multi-physics approach of hydrostatic equilibrium considering magnetic body force as well as gravity is presented. The magnetic body force should be regarded as an additional forcing term in the momentum equation of hydrodynamics. It is also shown that the virtual air-gap based Kelvin's force formula is a useful method for the calculation of force distribution in the magnetic liquid. The experimental result which was performed by a load-cell measurement system agreed quantitatively well with the numerical one.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.1
• /
• pp.42-48
• /
• 2008

A numerical simulation has been conducted to investigate the physics of the Ranque-Hilsch vortex tube. Even though currently available turbulent models cannot predict such complex flow accurately, it was expected that the simulation would enlighten underlying physics qualitatively. The balance of energy on a fluid particle moving along some typical streamlines through shear work and heat transfer was investigated to explain the physics of energy separation process. It was found that the heat transfer cancels major part of the energy separation done by shear work. It was also found that the most of energy separation occur near inlet and hot outlet.