• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.157-163
• /
• 2010

고체산화물연료전지는 세라믹 물질로 이루어지며, 세라믹 물질의 물성치는 작동조건에 따라 달라진다. 따라서, 높은 신뢰성을 가지는 시뮬레이션 모델을 개발하기 위해서는 세라믹 물질의 물성치를 정확하게 예측할 수 있어야한다. 본 논문에서는 고체산화물연료전지의 성능에 영향을 미치는 여러가지 물성치를 선택하고 그 물성치를 위한 시뮬레이션 모델이 개발되었다. 개회로전압을 위한 깁스에너지, 활성화손실을 위한 교환전류밀도, 저항손실을 위한 전기전도도가 계산되었다. 또한, 다공성 전극 내부의 물질전달 해석을 위해서 분자확산과 누센확산을 함께 고려하는 유효확산계수가 계산되었다. 이러한 계산과정 후에 물성치 모델과 전기화학반응 모델이 동시에 시뮬레이션 되었다. 해석코드의 검증을 위해서 전산해석 결과는 실험결과 및 Chan 등에 의해서 수행된 이전 연구결과와 비교되었다.

• The Journal of Korean Physical Therapy
• /
• 제18권2호
• /
• pp.25-34
• /
• 2006

Purpose: This study conducted quantitative sensory test and nociceptive flexion reflex(NFR) measurement to examine degree of pain depending on polarity of high voltage pulsed current(HVPC) of hyperalgesia site in hyperalgesia rat by local thermal injury. mechanical pain threshold, thermal pain threshold and root mean square of NFR were measured. Methods: This study was conducted with control group I of hyperalgesia rat at hind paw by thermal injury and experimental groups divided into cathodal HVPC group II, anodal HVPC group III and alternate HVPC group IV. It measured pain threshold and root mean square(RMS) of NFR and obtained the following results. Results: Mechanical pain threshold of hyperalgeisa site was significantly increased at groups II, III and IV applying HVPC group compared to control group, but there was no difference among HVPC groups. Thermal pain threshold of hyperalgesia site showed a significant increase in group II. Group III showed significant difference after 4 days of hyperalgesia. RMS of NFR at hyperalgeisa site was significantly reduced in group II after 2 days of hyperalgesia. Group III showed significant decrease after 5 and 6 days of hyperalgesia. Conclusion: Consequently it was found that application of HVPC of hyperalgesia site increased pain threshold at hyperalgesia site by mechanical stimuli and thermal stimuli. NFR by electrical stimuli was similar to pain threshold by mechanical stimuli. Effects by polarity of HVPC showed the greatest reduction of hyperalgesia when cathodal electrode was used.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1491-1495
• /
• 2004

For the evaluation of the mobile robot performance in complex environments, the experimental approach in an actual physical environment has been commonly taken. In the physical experimental approach, however, it is quite difficult to define the proper environment for the evaluation due to the lack of commonly agreed characteristics of the test environment. Particularly the number of combinations of types and physical parameters of the obstacles that the mobile robot is expected to deal with is practically unlimited. In an effort to simplify and improve the effectiveness of the evaluation process, we propose an evaluation method using decomposed environmental elements, where we evaluated the performance of the robot for a small group of simple and decomposed obstacle components, for examples projection and slope, instead of a large group of complicated random obstacles. The paper describes a set of simple obstacle models and performance parameters that we have chosen for the effective evaluation process. As an alternative to the physical experimental evaluation approach, in this paper, we used a virtual evaluation environment where the robot and the physical test environment has been modeled using a commercial multi-body dynamics analysis packaged called RecurDyn.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.33-36
• /
• 1998

Segmented block copolyetheresters defined as copolymers having sequences of alternating polyester hard blocks and polyether soft blocks create labile physical cross-links upon crystallization of hard polyester blocks Since the nature of the physical interlocking is a crystallite formed exclusively from the crystallizable hard segment, the hard segment content (HSC) and hard segment length (HSL) will play an important role in determining the properties such as mechanical property and dynamic mechanical property. (omitted)

• 대한물리의학회지
• /
• 제6권4호
• /
• pp.407-414
• /
• 2011

Purpose : The aim of this study was to clarify the lung capacity, maximal insufflation capacity, and peak cough flow when a mechanical insufflation-exsufflation(MIE) method was used to increase Duchenne muscular dystrophy patients' lung function. Methods : The subjects of the study were 21 patients with Duchenne muscular dystrophy. They were randomly selected from patients within the boundaries of the selection criteria, and divided into two groups; The subject group(n=11) used the mechanical insufflation-exsufflation method with traditional therapeutic exercise. The control group(n=10) used only traditional therapeutic exercise. Results :The results indicated that maximal insufflation capacity, unassisted peak cough flow and assisted peak cough flow significantly increased in the subject group(p<.05). By contrast, in the control group, the results didn't indicate the significant differences from the variable. There were significant differences in maximal insufflation capacity and assisted peak cough flow between the subject group and the control group before and after the application of the mechanical insufflation-exsufflation method. Conclusion : A mechanical insufflation-exsufflation method has positive effects on the improvements of cough functions and that of pulmonary functions such as lung volume, lung elasticity in patients with Duchenne muscular dystrophy.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.539-550
• /
• 2016

The objective of this research was to evaluate physical and mechanical properties of three species of Styrax woods from North Tapanuli in Indonesia. The woods were more than 15 years old. Physical properties such as specific gravity, green moisture content, and volume shrinkage were determined by the procedures based on BS-373 standard for small clear specimen. Furthermore, mechanical properties, including modulus of rupture, modulus of elasticity, compression parallel to grain and hardness were also tested according to the standard. Along the stem direction, the edge section had better properties compared with those near the pith section. And the base section had also better properties than upper section. Based on the specific gravity, all of the Styrax woods in this research were classified into III-IV strength classes. A good dimensional stability was demonstrated by the value of the tangential and radial ratio which reached one. With the consideration of the mechanical properties, Styrax woods were suitable use for raw materials of light construction, furniture and handy craft.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.545-558
• /
• 2000

The present study was designed to investigate the effect of low power GaAsAl laser on Fos expression in the spinal cord induced by noxious mechanical stimulation. Noxious mechanical stimulation was applied to the right hind paw following 30min of low power laser treatment using different intensity and treatment point and the resulting Fos expression in the spinal cord dorsal horn was compared to that obtained in rats exposed only to the noxious mechanical stimulation. The results were summarized as follows: 1. In intact control rats, only a few Fos like immunoreactive(Fos-IR) neurons were evident in the lumbar spinal cord dorsal horn. Similarly, following prolonged inhalation anesthesia, Fos-IR neurons were absent in the dorsal horn of the lumbar spinal cord. In animals treated with noxious mechanical stimulation, neurons with nuclei exhibiting Fos immunostaining were distributied mainly in the medial half of ipsilateral laminae I-V at lumbar segments L3-5. These findings directly indicated that prolonged anesthesia used in this study did not affect the Fos expression in the spinal cord dorsal horn of intact animals and noxious mechanical stimulation treated animals. 2. In acupoint treated animals, 10mW of laser stimulation, not 3mW intensity, significantly reduced the number of Fos immunoreactive neurons in the spinal dorsal horn induced by noxious mechanical stimulation(P<.01). However, the supressive effect of low power laser stimulatin was not observed in 3m Wand 10m W of laser stimulation into non-acupoint. These data indicate that 10mW of low power laser stimulation into acupoint is capable of inhibiting the expression of Fos in the dorsal horn induced by noxious mechanical stimulation. In conclusion, these findings raise the possibility that low power laser stimulation into acupoint may be a promising alternative medicine therapy for the mechanical stimulation induced pain in the clinical field.

• 한국전문물리치료학회지
• /
• 제22권3호
• /
• pp.23-32
• /
• 2015

The purpose of this study was to identify the effects of mechanical traction applied to the knee joint on pain, knee range of motion (ROM), timed up and go (TUG) and Western Ontario and MacMaster Universities Osteoarthritis (WOMAC) in patients with knee osteoarthritis (KOA) of Kellgren-Lawrence radiological rating scale II or III. Twenty three patients participated in the experiment for a period of four weeks. After baseline assessment, the patients with KOA were randomized into two groups: the traction group ($n_1=12$), which received traction with general physical therapy; and the control group ($n_2=11$), which received general physical therapy only on unilateral knee joints. Patients received interventions once a day, three times a week, for four weeks. Wilcoxon signed-rank test was used to analyze the change of dependent variances within the group during pre and post intervention. Mann-Whitney U test was used to analyze the change of dependent variances as TUG and passive ROM between the two groups. Analysis of covariance was used to analyze the change of dependent variances as numeric pain rating scale (NPRS) and WOMAC score between the two groups. In Wilcoxon signed-rank test, the traction group improved significantly with regard to NPRS (p<.01), passive knee flexion ROM (p<.01), passive knee extension (p<.05), TUG (p<.01) and WOMAC scores (p<.01) after intervention for four weeks, but not for the control group. In the Mann-Whitney U test and analysis of covariance, no significant difference was seen among all the dependent variances after intervention for four weeks between the two groups. These outcomes suggest that further studies should be carried out to determine the effects of mechanical traction prior to using it for the treatment of patients with knee osteoarthritis.