• 자원환경지질
• /
• 제52권6호
• /
• pp.617-626
• /
• 2019

이 연구에서는 해남 대흥사 북미륵암 마애여래좌상을 구성하는 석재의 암석학적 특성과 물성을 진단하였다. 이 마애불상은 미문상화강암에 부조되어 있으며, 전체적인 암상은 장석에 포위된 작은 석영 결정들이 미문상 조직을 이루고 있다. 손상도 진단 및 평가 결과, 흑색변색(8.4%)과 균열지수(6.6)에서 높은 훼손율을 보였고, 초음파 속도는 약간 풍화단계의 풍화도지수(평균 0.18)가 산출되었다. 마애불의 표면에 나타나는 손상은 기존 보호각의 영향으로 판단되고, 물성은 자연암반의 구조적 특성과 균열의 직접적인 영향에 의한 것으로 해석된다.

• 보존과학회지
• /
• 제29권1호
• /
• pp.25-33
• /
• 2013

전통 단청 교착제인 젤라틴(아교)의 물성에 따른 단청 도막의 성능을 평가하고자 직접 추출하거나 시판되는 아교 및 젤라틴 5종을 선정하고 수분반응성과 촉진내후성을 실험하였다. 실험결과, 겔 강도가 높은 1종의 젤라틴 단청 도막에서는 아교 대체 재료인 아크릴산 에스테르 수지 도막보다 수분 흡수율이 높고 촉진 내후성 시험 후에도 밀착성이 높았을 뿐만 아니라 젤라틴 도막보다 내수성이 우수하였다.

• 복식
• /
• 제58권9호
• /
• pp.151-165
• /
• 2008

The purpose of this study is to establish theoretical basis for relationship marketing exercised in the esthetic industry and to empirically analyze causal relationship among factors of esthetic relationship marketing, together with quality and the performance of the relationship. With empirical research, this study finds out that such relationship marketing factor as customer orientation, employee' expertise, physical property have an impact on the relationship quality between customers and esthetic salons' service providers. Customer satisfaction and trust increase the relationship between service providers and customers, and this also increases repurchase intention of the customer towards the service providers. These are significant findings in that they illustrate the importance of employee' expertise and customer orientation, and physical property in determining satisfaction and trust. The result of this study shows that service providers can enhance customer satisfaction and trust by utilizing relationship marketing more effectively, and can preserve the current customer basis.

• 한국산림과학회지
• /
• 제105권4호
• /
• pp.435-440
• /
• 2016

경상남도 하동군 옥종면 청룡리 땅밀림 산사태지의 인장균열 형성과 그에 따른 토양 물리성 변화를 조사한 결과, 주 인장균열과 국부적 인장균열의 단차와 절취경사는 차이가 없는 것으로 나타났다. 토양 물리성 변화의 경우에는 토양깊이 31~40 cm의 액상이 유의적 차이를 나타내었다. 한편, 액상은 미교란지와 교란지에서 유의적 차이가 나타났는데, 이는 입지요인에 의한 것으로 판단되다. 따라서 하동군 옥종면의 땅밀림 산사태지에서는 붕괴과정 중 토괴가 일체로 미끄러지며, 단적으로는 토양 물리성 변화도 크게 나타나지 않는 것으로 나타났다. 이에 따라 땅밀림 산사태에 대한 보다 연계성 있는 연구가 진행되어야 할 것이다.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.85-93
• /
• 1998

In the 2nd year study of a 5 year project to evaluate the soil quality and develop the best management practices for mountaineous soils, 11 runoff plots were treated and monitored with respect to physical property of the soil, runoff and sediment discharge, and the following results were obtained. 1. Bulk density and porosity did not show any siginificant difference between experimental treatments. 2. Runoff was basically dependent on the soil's physical property and tillage. Up-and-down plots showed the highest runoff while contour plots the lowest runoff. 3. Sediment yield in the mountaineous soils was directly related to tillage and residue cover. Residue covered plots showed the lowest sediment yield and up-and-down plots the highest sediment yield. And it is recommended that the best management practices using till_age and residue cover for the mountaineous soils must be developed to protect soil quality and maintain agricultural productivity.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.326-330
• /
• 2005

Aircraft composite structure with honeycomb core experiences core crush problem in manufacturing. To prevent core crush additional processes are needed such as core stabilization and prepreg material tie-down and this is the cause of increasing cost. Recent study shows that high friction prepreg prevent core crush without additional process. This paper presents the analysis of high frictional material which attracts lots of interests through physical property, mechanical property and microscopic

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.

• 한국의류학회지
• /
• 제23권5호
• /
• pp.694-702
• /
• 1999

By using commercial available electromagnetic interference (EMI) shielding fabrics, EMI shielding effectiveness(SE) and the physical properties were investigated. Thirteen specimens were chosen six fabrics were non-electrolytic plated with Cu, six plated with Cu+Ni and one plated with Ni, SE was measured by RF Impedance Analyzer HP4291A(Hewlett Co, Ltd)at the frequency of 100MHz-1.8GHz. The results showed that the commercial EMI shielding fabrics provided SE values over 30dB at the frequency of 100MHz-1.8GHz. Fabrics plated with Cu showed more effective shielding than those plated with Ni. The thickness of coating and fabric count were also influential factors on SE. Tensile properties were acceptable for lining fabrics but water vapor transport properties indicated that the better treatment condition were suggested to improve comfort properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.100-100
• /
• 2013

Among recently discovered 2-dimensional materials, molybdenum disulfide has fascinating physical properties. It is atomically thin and is a semiconductor with with a similar level of bandgap with silicon. Especially, its properties get interesting when it becomes thinner. Its bandgap goes through bandgap transition from indirect to direct gap. Also its gap size increases as its thickness decreases. In this talk, I am going to present our recent work on characterization of its electrical and optical properties. We used Raman and PL spectroscopy to observe its property dependence on thickness. We fabricated electrical devices to study optimal condition for MoS2 devices. Also we synthesized large-area MoS2 films for devices applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.