• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.10-17
• /
• 2016

This paper presents a laboratory validation of a new approach for Finite Element Model Updating(FEMU) on short-span bridges by combining ambient vibration measurements with static load input-deflection output measurements. The conventional FEMU approach based on modal parameters requires the assumption on the system mass matrix for the eigen-value analysis. The proposed approach doesn't require the assumption and even provides a way to update the mass matrix. The proposed approach consists of two steps: 1) updating the stiffness matrix using the static input-deflection output measurements, and 2) updating the mass matrix using a few lower natural frequencies. For a validation of the proposed approach, Young's modulus of the laboratory model was updated by the proposed approach and compared with the value obtained from strain-stress tests in a Universal Testing Machine. Result of the conventional FEMU was also compared with the result of the proposed approach. It was found that proposed approach successfully estimated the Young's modulus and the mass density reasonably while the conventional FEMU showed a large error when used with higher-modes. In addition, the FE modeling error was discussed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.443-453
• /
• 2013

The hybrid test is one of the most advanced test methods to predict the structural dynamic behavior with the interaction between a physical substructure and a numerical modeling in the hybrid control system. The purpose of this study is to perform the multi-directional dynamic test of a steel frame structure with the real-time hybrid system and to evaluate the validation of the results. In this study, FEAPH, nonlinear finite element analysis program for hybrid only, was developed and the hybrid control system was optimized. The inefficient computational time was improved with a fixed number iteration method and parallel computational techniques used in FEAPH. Furthermore, the previously used data communication method and the interface between a substructure and an analysis program were simplified in the control system. As the results, the total processing time in real-time hybrid test was shortened up to 10 times of actual measured seismic period. In order to verify the accuracy and validation of the hybrid system, the linear and nonlinear dynamic tests with a steel framed structure were carried out so that the trend of displacement responses was almost in accord with the numerical results. However, the maximum displacement responses had somewhat differences due to the analysis errors in material nonlinearities and the occurrence of permanent displacements. Therefore, if the proper material model and numerical algorithms are developed, the real-time hybrid system could be used to evaluate the structural dynamic behavior and would be an effective testing method as a substitute for a shaking table test.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.103-114
• /
• 2023

The Christian Museum of Gongju Jeil Church was first built in 1931 and was largely damaged during the Korean War, but the walls and chimneys have been preserved. This building has a high architectural values in that the chapel was reconstructed in 1956, and maintains its original form through repair of damaged parts rather than new construction. The stained glass windows were as installed in 1979 and has a great significance in the Dalle de Verre method using lump glass. However, some of the stained glass damaged partially, such as various cracks and splits, and vertical and horizontal cracks in the joint fillers of supporting the colored glass. As the structural materials of the stained glass window, an iron frame and cement mortar filled with it were used, and corrosion of iron, cracking of mortar and granular decomposition appear partially due to weathering. In the joint fillers, the content of Ca and S is very high, indicating that gypsum were used as admixtures, and the gypsums grow in a rhombohedral and forms a bundle, which is investigated to have undergone recrystallization. As a result of modeling the ultrasonic velocity at the joint fillers, the left and right windows at the entrance show relatively weak in the range of 800 to 1,600m/s, and the lower right corner of the altar window and the upper left corner of the center window were also 1,000 to 1,800m/s, showing relatively low physical properties. And gypsums produced during the neutralization of lime mortar were detected in the joint fillers and contaminants on the surface. Such salts may cause damage to the joint material due to freezing and thawing, so appropriate preventive conservation is required. Also, since various damage types are complexly appearing in stained glass window and joint filler, customized conservation treatment should be reviewed through clinical tests.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2007

Characterizing the risk posed by a mixture of chemicals is a challenging task due to the chemical interactions of individual components that may affect their physical behavior and hence alter their exposure to receptors. In this study, cell tests that represent subsurface environment were carried out using benz[a]anthracene (BaA) and p-xylene focusing on phasetransforming interaction to verify increased mobility and risk of highly sorbed pollutants in the presence of less sorbed, mobile liquid pollutants. A transport model was also developed to interpret results and to simulate the same process on a field scale. The experimental results showed that BaA had far greater mobility in the presence of p-xylene than in the absence of that. The main transport mechanisms in the vadose zone were by dissolution to p-xylene or water. The transport model utilizing Defined Time Steps (DTS) was developed and tested with the experimental results. The predicted and observed values showed similar tendency, but the more work is needed in the future study for more precise modeling. The field-scale simulation results showed that transport of BaA to groundwater table was significantly faster in the presence of NAPL, and the oral carcinogenic risk of BaA calculated with the concentration in groundwater was 15${\sim}$87 times larger when mixed with NAPL than when solely contaminated. Since transport rate of PAHs is very slow in the subsurface without NAPL and no degradation of PAHs was considered in this simulation during the transport, the increase of risk in the presence of NAPL is expected to be greater for the actual contaminated site.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.193-215
• /
• 2016

In recent years, the proliferation of diverse social networking services has led users to use many mediums simultaneously depending on their individual purpose and taste. Besides, while collecting information about particular themes, they usually employ various mediums such as social networking services, Internet news, and blogs. However, in terms of management, each document circulated through diverse mediums is placed in different categories on the basis of each source's policy and standards, hindering any attempt to conduct research on a specific category across different kinds of sources. For example, documents containing content on "Application for a foreign travel" can be classified into "Information Technology," "Travel," or "Life and Culture" according to the peculiar standard of each source. Likewise, with different viewpoints of definition and levels of specification for each source, similar categories can be named and structured differently in accordance with each source. To overcome these limitations, this study proposes a plan for conducting category mapping between different sources with various mediums while maintaining the existing category system of the medium as it is. Specifically, by re-classifying individual documents from the viewpoint of diverse sources and storing the result of such a classification as extra attributes, this study proposes a logical layer by which users can search for a specific document from multiple heterogeneous sources with different category names as if they belong to the same source. Besides, by collecting 6,000 articles of news from two Internet news portals, experiments were conducted to compare accuracy among sources, supervised learning and semi-supervised learning, and homogeneous and heterogeneous learning data. It is particularly interesting that in some categories, classifying accuracy of semi-supervised learning using heterogeneous learning data proved to be higher than that of supervised learning and semi-supervised learning, which used homogeneous learning data. This study has the following significances. First, it proposes a logical plan for establishing a system to integrate and manage all the heterogeneous mediums in different classifying systems while maintaining the existing physical classifying system as it is. This study's results particularly exhibit very different classifying accuracies in accordance with the heterogeneity of learning data; this is expected to spur further studies for enhancing the performance of the proposed methodology through the analysis of characteristics by category. In addition, with an increasing demand for search, collection, and analysis of documents from diverse mediums, the scope of the Internet search is not restricted to one medium. However, since each medium has a different categorical structure and name, it is actually very difficult to search for a specific category insofar as encompassing heterogeneous mediums. The proposed methodology is also significant for presenting a plan that enquires into all the documents regarding the standards of the relevant sites' categorical classification when the users select the desired site, while maintaining the existing site's characteristics and structure as it is. This study's proposed methodology needs to be further complemented in the following aspects. First, though only an indirect comparison and evaluation was made on the performance of this proposed methodology, future studies would need to conduct more direct tests on its accuracy. That is, after re-classifying documents of the object source on the basis of the categorical system of the existing source, the extent to which the classification was accurate needs to be verified through evaluation by actual users. In addition, the accuracy in classification needs to be increased by making the methodology more sophisticated. Furthermore, an understanding is required that the characteristics of some categories that showed a rather higher classifying accuracy of heterogeneous semi-supervised learning than that of supervised learning might assist in obtaining heterogeneous documents from diverse mediums and seeking plans that enhance the accuracy of document classification through its usage.