• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.102-108
• /
• 2010

강둑의 안정성을 평가하기 위해서 강둑의 내부구조를 알아야 한다. 만약 물리탐사 방법이 콘관입시험(cone penetration test; CPT)과 시추(drilling)와 같은 지반공학기법과 함께 이용된다면 강둑의 안정성 평가를 위해 가장 효과적인 방법이 될 수 있다. 맥상체나 하층토는 일반적으로 다양한 범위의 압도를 갖는 물질들로 구성되어 있으므로 강둑에서 물의 침투 및 기계적 안정성을 예측하기 위해서는 토양의 특성 및 층상구조를 정확히 평가해야만 한다. 이 연구에서는 매우 긴 강둑에 대하여 이러한 변수들을 매우 효과적으로 알아내기 위하여 물리탐사 자료를 이용한다. 물리탐사 방법으로 측정된 제방 토양의 S파 속도와 전기비저항을 이용하여 토양을 분류한다. 이러한 분류는 미고결 사질토 모델(unconsolidated sand model)이라 불리는 물리적 토양 모델에 기초한다. 이러한 모델을 이용하여 S파 속도와 전기비저항 종단면도로부터 강둑을 따라 토양 종단면도가 만들어진다. 이러한 토양 종단면도는 강둑 조사에 대해 그 유용성이 이미 검증된 지반공학 검층자료(geotechnical logs)에 의해 검증되어 왔다.

• 대한화학회지
• /
• 제68권3호
• /
• pp.160-175
• /
• 2024

본 연구의 목적은 AI 분류 모델을 기반으로 한 화학 I 수업의 효과를 검토하고자 한다. 이를 위하여 경북 D 고등학교에서 2023년 1학기에 시행된 화학 I 수업에서 AI 분류 모델을 활용한 수업의 개발과 적용 후 그 변화를 탐색하였다. 교과 내용과 AI 도구를 선정하고 교과-AI융합 교육 모형 및 AI 하드웨어 소프트웨어를 결정한 후, 프로그램의 세부 활동을 개발하여 실제 수업에 적용하였다. 수업 적용 후, 학생들의 화학 개념 형성, AI 가치 인식, AI 기반 메이킹 역량의 세가지 측면에서 자기 효능감이 향상되었음이 확인되었다. 구체적으로, 텍스트 및 이미지 분류 모델 기반의 화학 수업이 학생들의 화학 개념 형성에 대한 자아 효능감에 긍정적인 영향을 미쳤으며, 학생들의 AI 가치 인식과 흥미를 증진시켰고, 학생들의 AI와 피지컬 컴퓨팅 능력을 향상시키는데 기여하였다. 이러한 결과는 AI 분류 모델을 기반으로 한 화학 I 수업이 학생들에게 긍정적인 영향을 미침을 보여주며, 교육현장에서의 유용성을 입증한다.

• 인터넷정보학회논문지
• /
• 제12권5호
• /
• pp.47-61
• /
• 2011

최근 사이버 범죄의 증가와 그 대상 시스템의 다양화로 인하여 디지털 포렌식의 중요성이 커지고 있다. 일부 시스템들은 전원이나 네트워크를 차단하지 않고 수사하는 live forensic의 방법을 채택하고 있는데, 인터넷 사용이 일반화됨에 따라 live forensic 방법이 채택되는 횟수가 증가하고 있다. 그러나 live forensic 기술이 상당한 발전을 거듭하였음에도 불구하고 원격으로 접근하여 행해지는 Anti-forensic 행위에는 여전히 취약한 실정이다. 이와 같은 문제를 해결하기 위하여 첫 번째로 우리는 Anti-forensic 행위를 5개의 계층으로 분류하고 각 계층별로 가능한 Anti-forensic 행위의 시나리오를 생성하는 방법을 제안하였다. 두 번째로 fuzzy 전문가 시스템을 제안하여 효과적으로 Anti-forensic 행위를 탐지할 수 있도록 하였다. 몇몇 Anti-forensic 행위에 사용되는 명령어들은 일반적인 시스템 관리를 위하여 사용되는 명령어와 매우 유사하다. 따라서 우리는 fuzzy logic을 사용하여 모호한 데이터를 다룰 수 있도록 하였다. 미리 정의된 시나리오에서 명령어와 옵션 및 인자 값을 이용하여 룰을 생성하고 fuzzy 전문가 시스템에 이 룰을 학습하도록 하여 유사한 행위가 탐지되었을 때 추론을 통하여 수사관에게 얼마나 위험한 행위인지 알려준다. 이 시스템은 live forensic 수사가 진행될 때 발생할 수 있는 Anti-forensic 행위를 실시간으로 탐지할 수 있도록 하여 증거 데이터의 무결성을 유지하도록 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.112-114
• /
• 2001

In this letter, we report on the investigation of Si/Ti, Pt/Si/Ti, Co/Si/Ti Ohmic contacts to p-type 4H-SiC. The contacts were formed by a 2-step vacuum annealing at $550^{\circ}C$ for 5 min, $850^{\circ}C$ for 2 min respectively. The contact resistances were measured using the transmission line model method, which resulted in specific $10^{-4}{\Omega}cm^2$, and the physical properties of the contactcontact resistivities in the $9.2{\times}10^{-4}$, $7.1{\times}10^{-4}$ and $4.5{\times}s$ were examined using microscopy, AES(auger electron spectroscopy). AES analysis has shown that, at this anneal temperature, there was a intermixing of the Ti and Si, migration of into SiC. Overlayer of Pt, Co had the effect of decreasing the specific contact resistivity and improving the surface morphology of the annealed contact.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.44-51
• /
• 2014

Considering the importance of the detailed resolution of the reacting flow field inside a gasifier, the objective of this study lies on to investigate the effect of important variables to influence on the reacting flow and thereby to clarify the physical feature occurring inside the gasifier using a comprehensive gasifier computer program. Thus, in this study the gasification process of a 1.0 ton/day gasifier are numerically modeled using the Fluent code. And parametric investigation has been made in terms of swirl intensity and aspect ratio of the gasifier. Doing this, special attention is given on the detailed change of the reacting flow field inside a gasifier especially with the change of this kind of design and operation parameters. Based on this study, a number of useful conclusions can be drawn in the view of flow pattern inside gasifier together with the consequence of the gasification process caused by the change of the flow pattern. Especially, swirl effect gives rise to a feature of a central delayed recirculation zone, which is different from the typical strong central recirculation appeared near the inlet nozzle. The delayed feature of central recirculation appearance could be explained by the increased axial momentum due to the substantial amount of the presence of the coal slurry occupying over the entire gasifier in gasification process. Further, the changes of flow pattern are explained in detail with the gasifier aspect ratio. In general, the results obtained are physically acceptable in parametric study.

• Journal of Pharmaceutical Investigation
• /
• 제22권2호
• /
• pp.155-161
• /
• 1992

Although glycosylated liposomes have attracted much attention as targeting delivery systems (DDS) of drugs to specific organs which have glycoside receptors, physical instability of liposomes greatly limits their practical application. In this case, proliposomes might be a potential answer to solve this problem. Utilizing the proliposomes as tageting DDS has been a goal of our series of works; we have tried to develop DDS which form liposomes uppon adding water and can deliver drugs to specific target organs/cells such as hepatocytes. In this paper, preparation of glycosylated liposomes and binding of the liposomes with lectin (agglutinin RCA 120) was studied. Asialoletuin (AF) was selected as a model compound which has galactose terminal and is favorable for binding with galactose receptor on the surface of hepatocytes. AF was obtained by splitting the terminal N-acetylneuraminic acid (NANA) of fetuin. Small unilamellar AF-liposomes were prepared by mixing aqueous solution of AF-palmitate with thin film of phosphatidyl choline and cholesterol (30:10 w/w) formed on the innersurface of the round bottomed flask. They were successively extruded through polycarbonate membranes (0.45 mm). Palmitoyl-AF not incorporated into the liposomal bilayer was separated from liposomes by a Sepharose 4B column equilibrated with 10 mM Tris-HCI buffered saline. Lectin (agglutinin RCA 120) was added to the suspension of AF-liposomes and incubated at $37^{\circ}C$ for 2 hr. After centrifugation, the unbound lectin in the supernatant was assayed for protein. The binding of the lectin to AF-liposomes (AF content 2.8 nmole) at $37^{\circ}C$ was linear at least upto 35 mg of lectin indicating high affinity association of the lectin to AF molecules of the liposomes.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.83-90
• /
• 2011

Main objectives of this study were to investigate the effects of a lubricant, magnesium stearate, as blended in a hydrophilic matrix tablet and to identify significant factors using a tablet ejection force and a swelling property. The characteristics of tablet ejection were evaluated with three different compression forces (30, 40, and 60 MPa) and two controlled factors, amount of magnesium stearate and its mixing time. A hydrophilic model drug (terazosin HCl dihydrate) was regarded as a default factor. Tablet swelling was also evaluated. The optimal amount of PEG compared to PEO was set to be 88.50% w/w. As the amount of magnesium stearate was varied from 0.79% to 2.20% w/w, the amount of PEO and PEG was adjusted to meet the tablet's total weight while maintaining the ratio between the two excipients constant. As the mixing time of magnesium stearate was increased, the tablet ejection force and the swelling property were decreased. As the amount of magnesium stearate was increased, the tablet ejection force and the swelling property were decreased since the increased mixing time and the amount of magnesium stearate induced hydrophobic properties of the matrix tablet more effectively. The ejection force of the tablet increased as a result of increase in the compression force, which means that the breaking of tablet/die-wall adhesion energy was also increased when the compression energy was increased. The results gavea valuable guide how to choose suitable amount of the lubricant with processing conditions for the development of hydrophilic matrix formulations.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3682-3690
• /
• 2013

본 연구는 미용학적 측면에서 중년여성을 대상으로 사회적 지지, 자기효능감, 주관적 건강 등 성공적 노화의 영향요인을 분석하고 검증하는 것이다. 서울과 경기 지역의 50~64세의 321명을 대상으로 설문조사하였으며 수집된 자료는 SPSS 18.0으로 분석하였고, 성공적 노화의 영향요인을 파악하기 위하여 다중회귀분석을 시행하였다. 그 결과를 요약하면 다음과 같다. 첫째, 성공적 노화에 가장 큰 영향을 미치는 요인은 사회적 지지였으며, 다음은 자기효능감, 주관적 건강의 순이었다. 둘째, 이들 변인들이 중년여성의 성공적 노화를 56.7% 설명하였다. 그러므로 중년여성들은 성공적인 노후를 위해 노화에 대한 능동적인 의식과 더불어 적극적인 태도를 취하는 것이 필요하며, 노년을 준비하는 예비 노년층에 맞는 실질적인 교육과 중재가 요구된다. 본 연구의 결과를 표면적 가치에 중점을 두고 있는 미용의 지식체계에 신체적, 심리적, 사회적 건강의 영역이 포함될 수 있도록 기초자료로 제공하고자 한다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.142-149
• /
• 2003

Blind hydraulic backfilling is a commonly used technique for subsidence control of the strata over unapproachable waterlogged underground excavations. In this investigation model studies on all the three variants of this technique, namely, hydro-pneumatic or air-assisted gravity backfilling, pumped-slurry backfilling and simple gravity backfilling, have been carried out in fully transparent models of the underground excavations. On examination of the filling process, it was revealed that in all the three cases, the basic process of filling occurs by sand transport along one or more meandering channels. The relative influence of sand, water and air flow rates on the area of filling from a single inlet point and the hydraulic pressure loss per unit length were studied in details. In hydro-pneumatic backfilling process, the air bubbles while moving upward through the meandering channels provide an additional buoyant force over and above the available hydraulic head. In this way the area of filling from a single borehole may be quite large even at small flow rates of water. During actual field implementation the injected air, if not released completely from the rise side holes, may cause troubles by way of creating potholes on the surface. The pumped-slurry technique has shown its capability of filling a relatively larger area at faster rate, especially when high-volume, low-pressure method was selected. But simple gravity filling was also found to be equally effective method as slurry pumping, especially when flow rates were high. In the second and third method discussed above, examination of variations of injection pressure was also done and its relation with physical phenomenon was also attempted. Some empirical relationships were also developed using multivariate regression with a view to help the practicing engineers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.197-200
• /
• 2001

In this letter, we report on the investigation of Ni/Si/Ni Ohmic contacts to n-type 4H-SiC. Ohmic contacts have been formed by a vacuum annealing and $N_2$ gas ambient annealing method at $950^{\circ}C$ for 10 min. The specific contact resistivity ( $\rho_{c}$ ), sheet resistance($R_s$), contact resistance($R_c$), transfer length($L_T$) were calculated from resistance($R_T$) versus contact spacing(d) measurements obtained from 10 TLM(transmission line method) structures. The resulting average values of vacuum annealing sample were $\rho_{c}=3.8{\times}10^{-5}\Omega cm^{3}$, $R_{c}=4.9{\Omega}$, $R_{T}=9.8{\Omega}$ and $L_{T}=15.5{\mu}m$, resulting average values of another sample were $\rho_{c}=2.29{\times}10^{-4}\Omega cm^{3}$, $R_{c}=12.9{\Omega}$ and $R_{T}=25.8{\Omega}$. The physical properties of contacts were examined using X-Ray Diffraction and Auger analysis, there was a uniform intermixing of the Si and Ni, migration of Ni into the SiC.