• Journal of the Korean Wood Science and Technology
• /
• v.1 no.2
• /
• pp.3-10
• /
• 1973

This study was carried out to examine the characeristics of waste sanders(S)from. plywood and pre-finishing plywood surface sanding and double saw finishing, as a new extander in urea-formaldehyde resin(UFR) in plywood adhesive, and to focus, adhesive strength using the glue extended with milled sanders(MS) as extender, leveling the optimum amount of MS to be added, and examining the physical properties of glue extended MS & S. Also economical good feasibility of substitution for wheat flour(WF) with MS as a new extender is analyzed and presented in details. Selecting three standard samples of 80, 100 and 180 mesh, sorking them in distilled water at $20^{\circ}C$, 24 hours, redrying at $105^{\circ}C$ and rescreening the sample with standard screen, again, the 3 samples of 80, 100, and 180 mesh are passed 23 percent through 80 mesh sander standard sample 27 percent through on 100 mesh and only 10.9 percent through 180 mesh, respectively. The particle size of retained parts are greater in size of redried form. It seems undoubtly that particles to be extended in glue are got swollen and become greater in size and coarser in shape. The shape of fresh S particles are irregular thin needle with small scale, as shown in Figure 5. PFS are so finer than plywood S that only 9.8 percent of the S retained on 100 mest screen, 24. 30 percent on 100-160 mesh, and 65.9% on 160-180 mesh. But particle size of the fresh S is large enough to make the viscosity of glue direct extended with S too high to apply it glue spreader. The glue extended with milled sanders(MS). 3 hours milled PFS or 6 hours milled plywood S, having particle sizes shown in Tables 7 and 8, as ratio of Reain/MS/WF/water: 100/8/8/10, indicate good viscosity of 16 to 24 ps, as shown in Figure 5, for applying direct to glue spreader, have high tensile-shear strength (adhesive strength), 102.4 kp/$cm^2$, and 94 percent wood failure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.1
• /
• pp.57-67
• /
• 1984

The purpose of this study is to develop a devided skist Pattern drafting method for Korean Women between the ages of 18$\~$24 on the basis of their physical characteristics which differs from those of other races in its size and figure. The study procednras are as follows : 1, A new devided skirt pattern drafting method is developed based on the results of draping to find the essential measuring items for devided skirt construction, 27 items of KAIST measurement data analysis to establish representative and independent items and fitting tests. 2. To establish fittness and comfort in the new pattern comparing it with in a conventional one, asensory evaluation is applied. According to the statistical analysis of the results of the sensory evaluation, the findings are as followings ; 1. Composite reliability coefficient is 0.68. 2. Qut of 30 items, 25 items for fittness show significant differences (pp$\leqq$0.05, p$\leqq$0.01, P$\leqq$0.001) between the two, with the new pattern better fitted, presenting a pleasing appearance in hormony with the figure and contributing to the wearer's sense of wellbeing. 3. Hip crotch and hem dimensions for comfort show significant differences (p$\leqq$0.05) between the two, with the new pattern more comfortable, but no significant difference is showed between the two in activity variable. 4. The new pattern drafting method is shown in figuke 4.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.7
• /
• pp.727-740
• /
• 2012

This study is for the enhancement and utilization of future graphic design for T-shirts and deals with the expression styles and features of T-shirt graphic designs that appear in modern fashion. A literature examination about graphic design and T-shirts was performed for the research method and the analysis followed 378 pieces of graphic design featured in four major international collections for females from 2001S/S to 2011S/S. The research results from the expression type of T-shirt graphic design in the modern fashion are as follows. Expression in graphic figure accounts for the largest portion of 40.8% that includes illustration or cartoon characters, personal figure or part of the physical body, object in daily life or landscape pictures, animals and plants, and others. Expression given in text with typography or logo accounted for 27.5%, expression combined with letter/text, graphics and geometric figures accounted for 24.3%, geometrical expression accounted for 7.4%; most of which are given in print. Characteristics found in modern fashion graphic design are as follows. First, role of sort of public relations marketing was accompanied with utilization of brand logo or symbol. Second, visual play was shown in a sense of humor with diverse graphic figures and playful texts, witty layout with graphic motives, and a free design formation. Third, it denoted a front burner issue delivering the message for various current events or arguments via the way of texts, slogans, and symbolic pictures. Fourth, it depicted artistry through the self-expressive creation of the designer.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1225-1235
• /
• 2018

In this study, as a part of practical and customized smart contents development planning research related to smart fitness contents associated with smart wear that can monitor physical activity, we investigated the potential needs for smart fitness contents through research. As a result, the potential needs for smart fitness contents is 'accessibility to use', 'inducement of interest', 'diverse story line' were derived at the stage of 'before exercise', 'Real - time voice coaching', 'accurate exercise posture monitoring', and 'personalized exercise prescription' were derived at the stage of 'during exercise'. At the stage of 'after exercise', 'substantial reward system', 'grading system', 'body figure change monitoring' and 'everyday life monitoring' were derived. At the stage of 'connection to the next exercise', 'triggering exercise motivation', 'high sustainability' wear derived.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.212-212
• /
• 2000

Since the first obserbvation of carbon nanotubes, extensive researches have been done for the synthesis using arc discharge, laser vaporization, and plasma-enhanced chemical vapor deposition. Carbon nanotubes have unique physical and chemical properties and can allow nanoscale devices. Vertically aligned carbon nanotubes with high quality on a large area is particularly important to enable both fundamental studies and applications, such as flat panel displays and vacuum microelectronics. we have grown vertically aligned carbon nanotubes on a large area of Si substrates by thermal chemical vapor deposition using C2H2 gas at 750-950$^{\circ}C$. we deposited catalytic metal on Si susbstrate using thermal evaporation. The nanotubes reveal highly purified surface. The carbon nanotubes have multi-wall structure with a hollow inside and it reveals bamboo structure agreed with base growth model. Figure 1 shows SEM micrograph showing vertically aligned carbon nanotubes whih were grown at 950$^{\circ}C$ on a large area (20mm${\times}$30mm) of Si substrates. Figure 2 shows TEM analysis was performed on the carbon nanotubes grown at 950$^{\circ}C$ for 10 min. The carbon nanotubes are multi-wall structure with bamboo shape and the lack of fringes inside the nanotube indicates that the core of the structure is hollow. In our experiment, carbon nanotubes grown by the thermal CVD indicate base growth model.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.661-665
• /
• 2022

The 3 MeV proton irradiation effects on SiGe low noise amplifier (LNA) (NXP BGU7005) performance under different voltage supply VCC (0 V, 2.5 V) conditions were firstly experimental studied in this present work. The S parameters including S₁₁, S₂₂, S₂₁, 1 dB compression point and noise figure (NF) of the test samples under different bias voltage supply were measured and compared before and after 3 MeV proton irradiation. The total proton irradiation fluence was 1 × 10¹⁵ protons/cm². The maximum degradation quantities of the gain S₂₁ and NF of the test samples under zero bias are measured respectively 1.6 dB and 1.2 dB. Compared with the samples under 2.5 V bias supply, the maximum degradation of S₂₁ and NF are respectively 1.1 dB and 0.8 dB in the whole frequency band. It is noteworthy that the gain and NF of SiGe LNAs under zero-bias mode suffer enhanced degradation compared with those under normal bias supply. The key influence factors are discussed based on the correlation of the SiGe device and the LNA circuit. Different process of the ionization damage and displacement damage under zero-bias and 2.5 V bias voltage supply contributed to the degradation difference. The underlying physical mechanisms are analyzed and investigated.

• 한국체육학회지인문사회과학편
• /
• v.51 no.3
• /
• pp.79-88
• /
• 2012

The purpose of this study was to find spectator's value cognition and expected-benefit factors on professional baseball sportstar. Purposeful Sampling method was used to select among fan club leaders and people who had watched baseball games over ten years 8 informants who watched more than 4 times in 6 baseball games in 2011 Lotte Card Professional Baseball League. Data collection relies on focus group interviews and in-depth interviews. Text analysis was attempted to adopt the A-R-C needs theory proposed by Thomson(2006) for spectator's value cognition and the metaphors for consuming by Holt(1995) for expected-benefit factors. The research summary is as follow: Spectator's value cognition on professional baseball sportstar were an object of entertainment-oriented value, a major figure for social relationship-oriented and an object of identical. Spectator's expected-benefit factors on professional baseball sports tar were confirmation of values and heroic orientation. Meanwhile, spectator who had entertainment-oriented value cognition on professional baseball sportstar expect heroic orientation, who recognize professional baseball sportstar a major figure for social relationship-oriented and an object of identical pursue confirmation of values.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.121-133
• /
• 2016

The purpose of this study is to recognize the differences of visual evaluation by variations in pattern and silhouette of the block dresses. The stimuli are 9 samples: 3 variations of the silhouette and 3 variations of the size of pattern. The data has been obtained from 55 fashion students and has been analyzed by using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows; 1) The visual evaluation by pattern and silhouette of block dresses are composed of 4 factors: lovable personality, physical characteristics, boldness, and simplicity. 2) Block dresses were evaluated to display the figure more efficiently, such as looking slimmer or taller, in the order of 2nd stage, 1st stage, and 3rd stage in every silhouette. As the patterns became bigger, straight silhouette dresses were judged to have bolder, more dignified images. 3) Block dresses were evaluated to have cute and lively images in order of hourglass silhouette, straight silhouette, and fitted silhouette in every pattern. They were evaluated to appear slimmer and taller in order of hourglass silhouette, fitted silhouette, and straight silhouette in every pattern. 1st stage and 2nd stage dresses were evaluated to have a bolder, more dignified image in order of fitted silhouette, hourglass silhouette, and straight silhouette. 4) The pattern and the silhouette of the block dresses interacted with boldness. These were the boldest, most dignified image in the fitted silhouette and 1st stage, while they were not judged so in the case of the straight silhouette and 1st stage. 5) According to the MCA regarding lovable personality and physical characteristics, the silhouette affected the visual image of the block dresses more than the pattern did. According to the MCA on simplicity, the pattern affected the visual image of the block dresses more than the silhouette.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.