• 한국안전학회지
• /
• 제28권6호
• /
• pp.17-22
• /
• 2013

The production of flame-retardant polypropylene powder coating with the addition of flame retardant (PP) controlled rheology (CR) and polypropylene, were discussed comparing the mechanical properties, such as safety and topical coating properties. Mechanical properties measurements showed almost the same as AA-1 where the flame retardant is not added. These results appear to, and because it is excellent in compatibility with polypropylene and flame retardant. Physical properties of the coating film, a test piece flame retardant organic is added, although it shows the physical properties of the coating film was stable, did not show the physical properties satisfactory is the test piece flame retardant of weapons has been added. In the safety of the topic, AA-4, AA-5 the results of thermal analysis but it is excellent, the LOI is excellent in 27.8 vol% 27.0 vol% in AA-4 and AA-2, AA-3, and 27.4 vol%, did not show many obstacles flame AA-5 result UL94.

• Journal of Microbiology and Biotechnology
• /
• 제15권4호
• /
• pp.815-822
• /
• 2005

In order to extend the shelf-life of packaged or coated foods, an antibacterial edible film was developed from soybean meal that had been fermented with Bacillus subtilis under the optimum condition of pH 7.0-7.5 and $33^{\circ}C$ for 33 h. The water vapor permeability of the fermented film ($86.0 mg/cm^2{\cdot}h$) was higher than those of normal soybean films ($66.9 mg/cm^2{\cdot}h$). Protein solubility of the fermented film was also higher than ordinary soy protein film at the pH range of 3 -10. The fermented soybean film had higher tensile strength and lower $\%$ elongation (elongation rate) than the ordinary soybean film, mainly because partial hydrolysis of proteins in the soybean film occurred during fermentation. Antimicrobial properties of the fermented film on foodstuffs were measured by placing the films on surime, jerked beef, and mashed sausage media; containing $10^2-10^3$ CFU/plate of foodborne pathogenic bacteria, and showed significantly higher inhibitory effects on the growths of all the indicating bacteria. The film could be used as a packaging material in the food industry. However, before direct application of the fermented film to the commercial food industry, its poor mechanical and antibacterial properties need to be improved.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• 폴리머
• /
• 제25권2호
• /
• pp.208-217
• /
• 2001

테레프탈산 (terephthalic acid), 비스페놀에이 (bisphenol-A)와 에틸렌글리콜 (ethyleneglycol)로 제조된 PET/BPA 공중합체를 용융 압축시켜 필름을 만들어 얼음물에 급냉시켰다. 이 공중합체 필름을 모세관 레오메타로 고상 압출시켜 연신 필름을 만들었다. 이 연신된 필름의 수축율, 결정성, 형태학, 열적, 동역학적 및 기계적 특성을 조사하였다. 공중합체 필름의 융점은 순수 폴리에틸렌테레프탈레이트(PET)보다 낮게 나타났다. 또한 결정화도와 밀도는 연신비와 연신속도의 증가와 더불어 증가하였으나, 연신온도 증가와 더불어 감소하였다. 공중합체 필름의 인장강도와 인장탄성률은 연신비 증가와 더불어 증가하였고, 연신온도 증가에 따라 감소하였다. 연신된 공중합체 필름의 수축율은 연신비와 연신속도가 증가할수록 감소하였다.

• 폴리머
• /
• 제26권6호
• /
• pp.778-784
• /
• 2002

덱스트란 용액으로 필름을 제조하여 여러 가지 특성들을 살펴보았으며, 가소제 및 가교제를 첨가하거나 저온 플라스마로 표면을 처리함으로써 이러한 특성들을 향상시킬 수 있는 지를 살펴보았다. 덱스트란 필름은 기계적 강도는 우수하였으나 부스러지기 쉽고 수분에 대단히 약한 특성을 보였다 가소제를 첨가할 경우에는 유연성이 크게 개선되는 대신에 기계적 강도가 크게 약화되었다. 하지만, 가소제를 첨가한 다음 가교제로 가교시키거나 함께 첨가할 경우에는 비교적 우수한 기계적 강도와 함께 유연성을 지닌 필름이 제조되었으며, 수분에 대한 저항성도 향상되었다. 또한, 아세틸렌 플라스마로 처리할 경우 필름 자체의 특성은 크게 변하지 않으나 친수성인 표면이 소수성으로 바뀌었다.

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.903-909
• /
• 2015

In this study, we used GO (graphene oxide) in order to enhance the adhesion between Ag NWs (nanowires) and substrates. By using a mixture solution of GO and Ag NW, a vacuum filtration process was used to fabricate a 50nm diameter thin film. Next, by using a light annealing process, the mechanical and electrical stability of Ag NW network was improved without any other treatment. The physical properties of the Ag NW - GO hybrid transparent conductive thin film was characterized in terms of a bending test, resistance and transmittance test, and nanoscale imaging using field-emission scanning electron microscopy.

• 한국표면공학회지
• /
• 제53권2호
• /
• pp.67-71
• /
• 2020

For deposition technology using plasma, it plays an important role in improving film deposited with high ionization rate through high density plasma. Various deposition methods such as high-power impulse magnetron sputtering and ion-beam sputtering have been developed for physical vapor deposition technology and are still being studied. In this study, it is intended to control plasma using inductive coupled plasma (ICP) antennas and use properties to improve the properties of Hafnium nitride (HfN) films using ICP assisted magnetron sputtering (ICPMS). HfN film deposited using ICPMS showed a finer grain sizes, denser microstructure and better mechanical properties as ICP power increases. The best mechanical properties such as nanoindentation hardness of 47 GPa and Young's modulus of 401 GPa was obtained from HfN film deposited using ICPMS at ICP power of 200 W.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6655-6665
• /
• 2015

할로겐계 난연제의 환경적 문제로 인한 규제가 강화되면서 비할로겐타입의 인계화합물을 기초로 한 난연제의 비중이 높아지고 있으며, 기능성 film 제조에 있어 난연 효과를 보이는 적인 첨가에 따라 수지의 물성 및 열적 특성이 확연히 달라진다. 난연 효과를 높이고자 난연제 과량 첨가시 수지의 물성은 크게 저하되며, 수축 또는 방청 등 기능성 film에 적용되기 어렵다. 본 연구에서는 적인MB의 함유량에 따른 LDPE film을 blow 타입의 사출공청을 통해 제조하였고, 이에 대한 난연성 시험과 인열 강도 및 수축률, 방청성 평가를 통해 적인-LDPE film의 기계적 특성 및 물성특성에 미치는 영향력과 함유량에 따른 적인난연 film의 특성연구를 그 목적으로 하였다. 난연성의 경우 VTM 0를 보였으며, 인열 강도의 경우 MD 및 TD의 경향성이 상반되는 것을 알 수 있었다. 수축률의 경우 함유량에 따른 특성은 보이지 않았으며, 방청성의 경우 국내 방청 수축 필름 신뢰성 규격의 기준인 0.05 % 보다 우수한 결과를 보였다.

• 한국표면공학회지
• /
• 제15권2호
• /
• pp.57-67
• /
• 1982

Electroless Ni-plating is often utilized in industries due to its physical and mechanical characteristics in contrast to conventional electroplatings. Thus, electroless Ni-plating will be broadly applicated in many fields. However, The physial and mechanical properties of this depositss depend largely on the structure and P content of film and heat treatment. And here discused about the important results of those past research.

• 한국축산식품학회지
• /
• 제37권5호
• /
• pp.635-645
• /
• 2017

In this study, effect of transglutaminase (TGase) addition on physical, water barrier, optical and mechanical properties of mechanically deboned chicken meat protein (MDCM-P) films was investigated. When TGase was added to the films, the thickness increased, but the solubility decreased. Films treated with TGase exhibited higher water vapor permeability than control film (p<0.05). When TGase concentration increased, the $L^*$ values of films decreased, but $a^*$ and $b^*$ values increased. All films showed very good barrier properties against UV light. The highest tensile strength was obtained in MDCM-P films containing 3% TGase (p<0.05). The elongation at break values increased with the TGase concentration increasing from 1 to 3%, but decreased at higher enzyme concentration (p<0.05). The addition of TGase altered molecular organization and intermolecular interaction in the film matrix. TGase treated films showed smoother and ordered surface structure and homogeneous and compact microstructure. The results indicated that TGase use can be an effective approach in improving the solubility and mechanical properties of MDCM-P films.