• 한국결정성장학회지
• /
• 제20권3호
• /
• pp.125-132
• /
• 2010

For typical governing dimensionless parameters of Ar = 5, Pr = 1.16, Le = 0.14, Pe = 3.57, Cv = 1.02, $Gr_s=2.65{\times}10^6$, the effects of thermo physical properties such as a molecular weight, a binary diffusivity coefficient, a partial pressure of component B on solutally buoyancy-driven convection (solutal Grashof number $Gr_s=2.65{\times}10^6$) are theoretically investigated for further understanding and insight into an essence of solutal convection occurring in the vapor phase during the physical vapor transport of a $Hg_2Cl_2-N_2$ system. The solutally buoyancy-driven convection is significantly affected by any significant disparity in the molecular weight of the crystal components and the impurity gas of nitrogen. The solutal convection in a vertical orientation is found to be more suppressed than a tenth reduction of gravitational accelerations in a horizontal orientation. For crystal growth parameters under consideration, the greater uniformity in the growth rate is obtained for either solutal convection mode in a vertical orientation or thermal convection mode in horizontal geometry. The growth rate is also found to be first order exponentially decayed for $10{\leq}P_B{\leq}200$ Torr.

• 한국식품위생안전성학회지
• /
• 제34권1호
• /
• pp.106-114
• /
• 2019

본 연구는 황색포도상구균 박테리오파지를 물리화학적 방법을 통해서 제어하기 위해 황색포도상구균을 대상으로 하는 SAP 84 와 SAP 89를 신규 분리하였다. 그리고, 황색포도상구균 박테리오파지에 대해 물리적 방법으로 $55^{\circ}C$ 및 $60^{\circ}C$ 열처리와 pH 4, pH 7, pH 10 처리하였다. 그 결과 SAP 84는 $60^{\circ}C$에서 급격히 감소하였고 SAP 89는 $60^{\circ}C$에서 25 분 만에 모두 활성을 잃었다. SAP 84는 pH 4 ~ 10에서 매우 안정적이었고 SAP 89는 pH 10 이상에서 비교적 불안정해지는 것을 보였다. 화학적 방법으로는 에탄올과 차아염소산나트륨 및 FAS 처리를 하였다. SAP 84가 50%, 70% 에탄올에서 급격히 감소하였다. 살균력이 좋은 100 ppm의 차아염소산 나트륨에서도 SAP 84와 SAP 89는 상당히 안정적인 상태를 유지하고 있다. Virucidal agent로 사용되는 FAS를 10% 농도로 처리하였을 때 SAP 84와 SAP 89 모두 처리 직후부터 제거되는 것을 확인할 수 있었다. 따라서 본 연구를 통해 SAP 84와 SAP 89 모두 화학적 처리 방법인 FAS 처리를 통해서 제어 가능함을 보여주었다. 이외에도 SAP 84는 물리적 방법인 열처리의 저감화 효과가 좋았으며 SAP 89는 화학적 방법인 에탄올 처리의 저감화 효과가 비교적 좋았다. 이렇듯 물리화학적 처리방법으로 황색포도상구균 박테리오파지를 제어 가능할 것으로 사료된다.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.1-12
• /
• 2001

This paper describes the application of our recently developed two-phase model for flow-induced crystallization (FIC) to the simulation of fiber spinning and film blowing. 1-D and 2-D simulations of fiber spinning include the combined effects of (FIC), viscoelasticity, filament cooling, air drag, inertia, surface tension and gravity and the process dynamics are modeled from the spinneret to the take-up roll device (below the freeze point). 1-D model fits and predictions are in very good quantitative agreement with high- and low-speed spinline data for both nylon and PET systems. Necking and the associated extensional softening are also predicted. Consistent with experimental observations, the 2-D model also predicts a skin-core structure at low and intermediate spin speeds, with the stress, chain extension and crystallinity being highest at the surface. Film blowing is simulated using a "quasi-cylindrical" approximation for the momentum equations, and simulations include the combined effects of flow-induced crystallization, viscoelasticity, and bubble cooling. The effects of inflation pressure, melt extrusion temperature and take-up ratio on the bubble shape are predicted to be in agreement with experimental observations, and the location of the frost line is predicted naturally as a consequence of flow-induced crystallization. An important feature of our FIC model is the ability to predict stresses at the freeze point in fiber spinning and the frost line in film blowing, both of which are related to the physical and mechanical properties of the final product.l product.

• The Korean Journal of Ecology
• /
• 제27권5호
• /
• pp.307-310
• /
• 2004

It was found that seed germination and seedling growth of selected species were inhibited by phytotoxic substance released from fir trees. The aqueous extracts of leaves caused significant inhibition in the seed germination of the receptor plants, Whereas seed germination of some species was not inhibited in extracts of leaves, but seedling elongation of the receptor plants was also decreased by the aqueous extract. Dry weight growth was slightly increased in lower concentration of the extract, while that was proportionally inhibited by higher concentration of the extracts. Chemical substances of fir trees were shown the biological toxicity. The GC method was employed for analysis of phytotoxic chemicals and sixteen chemical substances were identified such as benzoic, phenylacetic, etc. Also 33 volatile substances were identified from the fir tree. These chemical compounds are assumed the substances related to allelopathic potential of Abies holophylla plant species.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.75-80
• /
• 2014

The convective flow structures in the vapor phase on earth are shown to be single unicellular, indicating the solutally dominant convection is important. These findings reflect that the total molar fluxes show asymmetrical patterns in a viewpoint of interfacial distributions. With decreasing the gravitational level form $1g_0$ down to $1.0{\times}10^{-4}g_0$, the total molar fluxes decay first order exponentially. It is also found that the total molar fluxes decay first order exponentially with increasing the partial pressure of component B, PB (Torr) form 5 Torr up to 400 Torr. Under microgravity environments less than $1g_0$, a diffusive-convection mode is dominant and, results in much uniformity in front of the crystal regions in comparisons with a normal gravity acceleration of $1g_0$.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.295-301
• /
• 1997

The effects of filler types and compositions on the final properties such as tensile strength, % elongation, hardness, and specific gravity of chloroprene rubber were investigated. The fillers involved in this investigation were HAF-type carbon black, Mistron, and white clay, For each filler, the variation of filler compositions gave almost the linear effects on the all properties investigated. For a fixed filler composition, different filler types gave different influential strength on rubber properties. After linearlization of experimental data with respect to each filler composition, the simple linear addition of each property with respect to filler compositions was applied to predict the final properties of the filler included rubber systems. For the chloroprene rubber system including the fillers composed of Mistron(25phr)/HAF(20phr)/clay(35phr), the predicted properties were well in accordance with the experimental results. Similar results were obtained for other additives such as processing oil and accelerator.

• 아시안잔디학회지
• /
• 제7권1호
• /
• pp.13-18
• /
• 1993

Much attention has been given recently to solve the environmental contamination in golf courses Changing to culture practice rather than chemical practice that depends on pesticides and fertilizers is a hot issue in golf courses or grasslands. Organic soil conditioners improve soil-plant envirormental conditions rich in physical properties. In this study, measuring systems to evaluate soil conditioning effects were set up for on-site purpose. After establishing the methodology for evaluating soil conditioner effects, 2 kinds of organic conditioners were rested for examination. The systems for the methodology included a set of simulating equipment for field capacity, an impact type soil column compactor, and an infiltration-percolation system. Test results using the systems showed bulk density and infiltration rate of mixed soil were decreased at highter rates of conditioner, but total porocities were increased. Increased porocities were most capillary pore space which has a positive effect on soil water potential. The systems and methodology in this study seem to have an efficiency to measure the effects of soil conditioner on site purpose.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.36-43
• /
• 2018

The physical and chemical analyses of mineral waste such as moisture content, water absorption, freezing-thawing resisting sexual, chemical composition and crystal structure were investigated. In the technological process of crushing, screening, molding, drying, preheating, sintering and cooling, many parameters were changed to eliminate the influence of freeze thaw stability and the ball billets were processed into slate ceramsites eventually. Adopting orthogonal experiment and range analysis, the optimal technology parameters were confirmed as preheating temperature of $300^{\circ}C$ for 25 minutes and sintering temperature of $1230^{\circ}C$ for 20 minutes. Slate wastes in Shangri-la could foam and expand without any additive. The ultra-light ceramsite could be directly used as building aggregate, since the analysis results of its leaching toxicity were eligible. Besides, effects of sintering temperature on physical property and crystal phase were also explored in this study.

• 한국물환경학회지
• /
• 제28권3호
• /
• pp.401-408
• /
• 2012

High-voltage dielectric discharges are an emerging technique in environmental pollutant degradation, which that are characterized by the production of hydroxyl radicals as the primary degradation species. The initiation and propagation of the electrical discharges depends on several physical, chemical, and electrical parameters such as 1st and 2nd voltage of power, gas supply, conductivity and pH. These parameters also influence the physical and chemical characteristics of the discharges, including the production of reactive species such as OH, $H_2O_2$ and $O_3$. The experimental results showed that the optimum 1st voltage and air flow rate for RNO (N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation were 160 V (2nd voltage of is 15 kV) and 4 L/min, respectively. As the increased of the 2nd voltage (4 kV to 15 kV), RNO degradation, $H_2O_2$ and $O_3$ generation were increased. The conductivity of the solution was not influencing the RNO degradation and $H_2O_2$ and $O_3$ generation. The effects pH was not high on RNO degradation. However, the lower pH and the conductivity, the higher $H_2O_2$ and $O_3$ generation were observed.

• 자원리싸이클링
• /
• 제30권3호
• /
• pp.41-46
• /
• 2021

메탄술폰산은 우수한 물리화학적 특성을 지니고 있어 금속의 침출에 효과적이다. 분자구조 및 코발트와 니켈 금속의 침출자료를 이용하여 메탄술폰산과 황산의 화학적 반응성을 비교하였다. 유발과 공명효과는 두 산의 반응성에 큰 영향을 미쳤다. 동일한 침출조건에서 코발트와 니켈의 침출률은 메탄술폰산보다 황산에서 높았다. 메탄술폰산의 강한 산도와 금속염의 높은 용해도를 고려하면 메탄술폰산을 금속회수시 침출제로 이용하는 것이 가능하다.