• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.87-93
• /
• 2014

Optical brightening agents (OBA) is generally used to improve the optical property of printing paper in the paper industry. However, effects of OBA addition on paper preservability has been not fully understood yet. Therefore, this study was aimed to investigate effects of a OBA on the aging characteristics of paper. The OBA treatment of three different types was performed by dipping a filter paper into each a OBA solutions of different concentrations. The filter papers applied with a OBA were artificially aged at 80oC and 65% RH, and their optical and mechanical properties were evaluated. It was found that application of OBAs influenced the aging characteristics of paper. Especially, after aging, the optical and mechanical properties of the filter paper treated with the tetra-type OBA were more significantly decreased than those of the non-treated filter paper. The more the concentration of the tetra-type OBA increased, the more decreasing rate of optical and mechanical properties of the filter paper. While, in case of di-type OBA and hexa-type OBA, paper optical and mechanical properties were slightly decreased or not changed with a OBA treatment.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1008-1012
• /
• 2020

In order to make reasonable design for the improvement of comprehensive mechanical properties of RAFM steels, the design system with both machine learning and high-throughput optimization algorithm was established. As the basis of the design system, a dataset of RAFM steels was compiled from previous literatures. Then, feature engineering guided random forests regressors were trained by the dataset and NSGA II algorithm were used for the selection of the optimal solutions from the large-scale solution set with nine composition features and two treatment processing features. The selected optimal solutions by this design system showed prospective mechanical properties, which was also consistent with the physical metallurgy theory. This efficiency design mode could give the enlightenment for the design of other metal structural materials with the requirement of multi-properties.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.8-16
• /
• 2005

Fire-killed trees of Korean red pine are valuable resources for industrial uses. It is common only believed that fire-killed trees are too weak and brittle to use in construction purposes. The misunderstandings of fire-killed trees lead these valuable resources abandonment. The purposes of this research are focused on scrutinization of material properties of fire-killed trees to facilitate industrial uses of these resources. The sample logs were collected from the forest fire site of the eastern coast area in which the most catastrophic wild fire had taken place in 2000. Fire-killed Korean red pines were classified into 3 levels by the degree of fire damage so called light, medium and heavy, then their physical, mechanical and chemical properties were compared with sound trees. No significant difference in physical appearances were found in the cross sections by degree of damage compared to sound tree but bark char. Investigation on mechanical and chemical properties indicates that forest fire did not impact significantly in lowering the strength of damaged trees. It was concluded that there was any limitation of forest fire-killed trees of Korean red pine in industrial utilization.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.223-234
• /
• 2016

Two-component epoxy resin is widely used in the cultural heritage restoration field. However according to mixing ratio of resin and hardener, curing property, mechanical strength and chemical structure differ which have possibility to effect the stability of cultural heritage. Result of questionnaire survey shows hands-on workers in the conservation field tend to mix the epoxy resin with his or her eye measurement when the using amount is small or mix additional hardener to shorten the pot life of epoxy resin. This research aims to analyze the curing property, mechanical strength and chemical structure of rapid curing type epoxy resin and medium curing type one depending on relative ratio of 0.25~4 of hardener to resin. When the amount of hardener was 0.5~2 times more than the resin, exothermic heat and curing speed were both increased. In case of included hardener to resin was lower than official ratio, mechanical strength (tensile shear strength, tensile strength and compressive strength) became higher along with active cross-linking bonding of the epoxy resin. Medium curing type epoxy relatively had lower exothermic heat and slower reaction during curing process. It was observed to be put to definite point of mechanical strength under lower content of hardener than official ratio. While, hardener ratio more than twice the resin slowed down the curing greatly and lowered the adhesion strength also. In conclusion, under the lower mixing rate of hardener than official ratio would show relatively fast reaction with similar mechanical strength. Over the official ratio on the other hand, material property drops rapidly. Accordingly, mixing ratio of epoxy resin is expected to be influential to the stability of cultural heritage.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.53-61
• /
• 2015

PURPOSES : The objective of this study is to evaluate the SDAR (solvent deasphaltene residue), which is obtained from the solvent deasphalting (SDA) process, as a pavement material. METHODS : The physical properties of the SDAR were evaluated based on its chemical composition, and asphalt mixtures with the SDAR were fabricated and used for the evaluation of mechanical properties. Firstly, the chemical composition of SARA (saturate, aromatic, resin and asphaltene) was analyzed using the TLC-FID (thin-layer chromatography-flame ionization detector). Moreover, the basic material properties of the asphalt binder with the SDAR were evaluated by the penetration test, softening point test, ductility test, and PG (performance grade) grade test. The rheological properties of the asphalt binder with the SDAR were evaluated by the dynamic shear modulus ($G^*$) obtained using the time-temperature superposition (TTS) principle. Secondly, the mechanical properties of the asphalt mixtures with the SDAR were evaluated. The compactibility was evaluated using the gyratory compacter. Moreover, the tensile strength ratio (TSR) was used for evaluating the moisture susceptibility of the asphalt mixtures (i.e., susceptibility to pothole damage). The dynamic modulus $E^*$, which is a fundamental property of the asphalt mixture, obtained at different temperatures and loading cycles, was used to evaluate the mechanical properties of the asphalt mixtures. RESULTS AND CONCLUSION : The SDAR shows stiffer and more brittle behavior than the conventional asphalt binder. As the application of the SDAR directly in the field may cause early failures, such as cracks on pavements, it should be applied with modifiers that can favorably modify the brittleness property of the SDAR. Therefore, if appropriate additives are applied on the SDAR, it can be used as a pavement material because of its low cost and strong resistance to rutting.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.113-121
• /
• 2016

Magneto-rheological elastomer (MRE) is a material which shows reversible and various modulus under magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, silicone rubber was used as a matrix of MREs. Carbonyl iron particle (CIP) was used to give magnetic field reactive modulus of MRE. The surface of the CIP was modified with chemical reactants such as silane coupling agent and poly(glycidyl methacrylate), to improve interfacial adhesion between matrix and CIP. The mechanical properties of MREs were measured without the application of magnetic field. The results showed that the tensile strength was decreased while the hardness was increased with the addition of CIP. Also, surface modification of CIP resulted in the improvement of physical properties of MRE, but the degree of orientation of CIP became decreased. The analysis of MR effect was carried out using electromagnetic equipment with various magnetic flux. As the addition of CIP and magnetic flux increased, increment of MR effect was observed. Even though the surface modification of CIP gave positive effect on the mechanical properties of MRE, MR effect was decreased with the surface modification of CIP due to decrease of CIP orientation. Throughout this study, it was found that the loading amounts of CIP affected the mechanical properties of MRE, and surface property of CIP was an important factor on MR effect of MRE.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.828-837
• /
• 2000

The purpose of this study was to evaluate the physical properties and the hand of bast/man made fiber mixed fabrics compared to linen. The mixed fabrics were made by rayon, polyester and modal fiber as warp yarn, and ramie, flax, rayon/flax and cotton/flax as weft yarn. The crease resistance, drape, tensile strength/extension, water absorbancy and warmth retention were measured for test fabrics. The mechanical properties were measured by Kawabata system, and the hand value was calculated by previously developed equation. The results obtained from this study were as follows: The crease resistance and drape properties of bast/man made fiber mixed fabrics were improved compared to those of linen. The tensile strength of polyester/bast fiber mixed fabrics increased compared to those of linen, but rayon/bast and modal/bast fiber mired fabrics decreased. The extension of all mixed fabrics was increased compared to that of linen. The rayon/ramie and modal/ramie mixed fabrics showed lower warmth retention than linen. The mixed fabrics used rayon and modal as warp yarn showed higher water absorbancy than linen. The Koshi and Hari hand value of all mixed fabrics showed lower than those of linen. Fukurami hand value showed little difference between mixed fabrics and linen. Shari, Kishimi, and Shinayakasa hand value of rayon/bast and modal/bast fiber mixed fabrics showed higher than those of linen.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.25-30
• /
• 2007

The characteristics of crosslinking and physical properties in partially crosslinked waste high density polyethylene (HDPE) were studied by introducing reactive melt processing with perbutyl peroxide (PBP). It was found that impurities in waste HDPE affected the crosslinking kinetics. Decrease in density and heat of fusion were observed in partially crosslinked HDPE while its melt viscosity increased. It was explained that impurities in waste HDPE enhanced the crosslinking compared to pure HDPE As a result, dramatic mechanical property improvement was achieved in the waste HDPE by crosslinking reaction.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.158-163
• /
• 2011

Rigid polyurethane foam (PUF) was synthesized with different contents of aliphatic polyester polyol, aromatic polyester polyol and aliphatic polyether polyol to know change of properties under sea water. UTM(universal testing machine), DSC(differential scanning calorimetry), hardness meter and FT-IR(Fourier transform spectroscopy) were used to study the PUF`s physical properties under sea water. Compressive strength and hardness of PUF decreased with increasing the content of aromatic polyester polyol under sea water as aging. According to the results of IR spectral analysis, reduction of urethane and urea peak was found and allophanate and biuret peak increased. Although glass transition temperature of PUF increased, mechanical properties of PUF decreased under sea water, because PUF gets brittle when crosslink density increase.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.555-562
• /
• 2014

Characteristics of carbonized fiberboard such as chemical materials absorption, electromagnetic shielding, and electrical and mechanical performance were determined in previous studies. The carbonized board therefore confirmed that having excellent abilities of these characteristics. In this study, the effect of density on physical properties and sound absorption properties of carbonized fiberboards at $800^{\circ}C$ were investigated for the potential use of carbonized fiberboards as a replacement of conventional sound absorbing material. The thickness of fiberboards after carbonization was reduced 49.9%, 40.7%, and 43.3% in low density fiberboard (LDF), medium density fiberboard (MDF), and high density fiberboard (HDF), respectively. Based on SEM images, porosity of carbonized fiberboard increased by carbonization due to removing adhesives. Moreover, carbonization did not destroy structure of wood fiber based on SEM results. Carbonization process influenced contraction of fiberboard. The sound absorption coefficient of carbonized low density fiberboard (c-LDF) was higher than those of carbonized medium density fiberboard (c-MDF) and carbonized high density fiberboard (c-HDF). This result was similar with original fiberboards, which indicated sound absorbing ability was not significantly changed by carbonization compared to that of original fiberboards. Therefore, the sound absorbing coefficient may depend on source, texture, and density of fiberboard rather than carbonization.