• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.177-177
• /
• 1999

The surface structure of epitaxial $\alpha$-Fe2O3(0001) grown on $\alpha$-Al2O3(0001) has been investigated using intermediate-energy x-ray photoelectron diffraction. Comparison of experiment with quantum mechanical scattering theory reveals that the surface is Fe-terminated, and that the first four layer spacings are -41%, +18%, -8%, and +47% of the associated bulk values, respectively. these results agree reasonably well with the predictions of molecular mechanics and spin-density functional theory previously reported in the literature for the Fe-terminated surface. however, we find no evidence for and O-terminated surface predicted to be stable by spin-density functional theory.

• 한국진공학회지
• /
• 제2권2호
• /
• pp.171-180
• /
• 1993

X-선 광전자 분광법(XPD)을 이용하여 GaAs(110) 절개면의 결정구조를 이해하였다. 각분해 X-선 분광법으로 GaAs(110) 면의 내각준위 Ga 및 As 3d의 스펙트럼을 얻어, 이 내각 준위의 세기 비율(intensity ratio)의 방위각과 편각에 따른 변화를 SSC(Single Scattering Cluster) 모델에서 얻은 회절패턴으로 곡선분석(fitting)하여 절개면의 재구성 구조(reconstruction geometry)를 얻었다. 이 절개면의 재구성된 값은 다른 실험의 결과와 비슷하였다.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.16-23
• /
• 2000

The epitaxial growth of $CeO_2$ films has been investigated on three different substrates-Si(111), $SrTiO_3$(001), and MgO(001)-over wide range of growth parameters using oxygen-plasma-assisted molecular beam epitaxy. Pure-phase, single-crystalline epitaxial films of $CeO_2$ (001) have been grown only on $SrTiO_3$(001). We discuss the growth conditions in conjunction with the choice of substrates required to synthe-size this oxide, as well as the associated characterization by menas of x-ray diffraction, reflection high-energy electron diffraction, low-energy electron diffraction, and x-ray photoelectron spectroscopy and diffraction. Successful growth of single crystalline $CeO_2$ depends critically on the choice of substrate and is rather insensitive to the growth conditions studied in this investigation. $CeO_2$(001) films on $SrTiO_3$exhibit the sturcture of bulk $CeO_2$ without surface reconstructions. Ti outdiffusion is observed on the films grown temperatures above $650^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.505-510
• /
• 2012

Cobalt oxide nanostructure materials have been prepared by adding several concentrations of spectator Ni ions in solution, and analyzed by electron microscopy, X-day diffraction, calorimetry/thermogravimetric analysis, UV-vis absorption, Raman, and X-ray photoelectron spectroscopy. The electron microscopy results show that the morphology of the nanostructures is dramatically altered by changing the concentration of spectator ions. The bulk XRD patterns of $350^{\circ}C$-annealed samples indicate that the structure of the cobalt oxide is all of cubic Fd-3m $Co_3O_4$, and show that the major XRD peaks shift slightly with the concentration of Ni ions. In Raman spectroscopy, we can confirm the XRD data through a more obvious change in peak position, broadness, and intensity. For the un-sputtered samples in the XPS measurement process, the XPS peaks of Co 2p and O 1s for the samples prepared without Ni ions exhibit higher binding energies than those for the sample prepared with Ni ions. Upon $Ar^+$ ion sputtering, we found $Co_3O_4$ reduces to CoO, on the basis of XPS data. Our study could be further applied to controlling morphology and surface oxidation state.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.551-557
• /
• 2002

Carbon nitride films have been deposited on Si(100) substrate by a high voltage discharge plasma combined with laser ablation in a nitrogen atmosphere. The films were grown both with the without the presence of an assisting focused Nd:YAG laser ablation. The laser ablation of the graphite target leads to vapor plume plasma expending into th ambient nitrogen arc discharge area. X-ray photoelectron spectroscopy and Auger electron spectroscopy were used to identify the binding structure and the content of the nitrogen species in the deposited films. The nitrogen content of the films was found to increase drastically with an increase of nitrogen pressure. The surface morphology of the films was studied using a scanning electron microscopy. Data of infrared spectroscopy and x-ray photoelectron spectroscopy indicate the existence of carbon-nitrogen bonds in the films. The x-ray diffraction measurements have also been taken to characterize the crystal properties of the obtained films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.240-243
• /
• 2002

Carbon nitride films have been deposited on Si(100) substrate by a high voltage discharge plasma combined with laser ablation in a nitrogen atmosphere. The films were grown both with and without the Presence of an assisting focused Nd:YAG laser ablation. The laser ablation of the graphite target leads to vapor Plume plasma expending into the ambient nitrogen arc discharge area. X-ray photoelectron spectroscopy and Auger electron spectroscopy were used to identify the binding structure and the content of the nitrogen species in the deposited films. The surface morphology of the films was studied using a scanning electron microscopy Data of infrared spectroscopy and x-ray photoelectron spectroscopy indicate the existence of carbon-nitrogen bonds in the films. The x-ray diffraction measurements have also been taken to characterize the crystal properties of the obtain films.

• 분석과학
• /
• 제11권3호
• /
• pp.189-193
• /
• 1998

조사후 핵연료의 용해실험 다음에 잔류된 불용성 잔유물을 구성하는 Mo, Ru, Rh 등의 원소로 이루어진 이성분계 합금인 $MoRu_3$와 $MoRh_3$을 아르곤 아아크로를 이용하여 $1700^{\circ}C$ 이상의 고온에서 합성하였다. 이들 합금의 정확한 구조와 결정격자상수는 ICDD(International Centre for Diffraction Data)에서 제작되는 분말회절수집철(JCPDS files) 등에 수록된 바가 없다. X선 회절분석결과 이들 두 합금은 육방밀집구조와 $P6_3/mmc$의 공간군을 갖는 $WRh_3$의 구조와 매우 유사한 것으로 나타났다. 이 화합물들의 격자상수, a와 c는 최소자승법을 이용하여 구하였다. 또한 XPS로 분석을 통하여 이들의 표면을 조사한 결과 금속 표면이 실온에서 공기와 접촉하였을 때 여러 구성성분 중에서 Mo(0)가 Mo(6+)로 산화되는 것을 확인하였는데, 아르곤이온으로 표면을 15분 정도 sputtering 하여 Mo(6+)층을 제거할 수 있었다. 합금의 구성성분 중, Mo, Ru, Rh 원소에서 내부 전자들의 결합에너지에는 커다란 변화가 없는 것으로 나타났다. 이들 화합물들의 자화율을 측정해 본 결과 2~300 K 범위에서 전형적인 Pauli-paramagnetic 행동을 보여주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.87-88
• /
• 2012

Metal oxide nanostructures have been applied to various fields such as energy, catalysts and electronics. We have freely designed one and two-dimensional (1 and 2-D) metal (transition metals and lanthanides) oxide nanostructures, characterized them using various techniques including scanning electron microscopy, transmission electron microscopy, X-ray diffraction crystallography, thermogravimetric analysis, FT-IR, UV-visible-NIR absorption, Raman, photoluminescence, X-ray photoelectron spectroscopy, and temperature-programmed thermal desorption (reaction) mass spectrometry. In addition, Ag- and Au-doped metal oxides will be discussed in this talk.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.388-388
• /
• 2010

Molybdenum oxide thin films were deposited on p-type Si(100) by an RF magnetron sputtering method. The physical and chemical properties of these films were studied with X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. The thickness of molybdenum oxide thin films was measured by spectroscopic ellipsometer (SE) and the thickness was about 200 nm. As the oxygen gas pressure increased, the thickness was decreased, the phases of the thin films were changed, and the amount of metallic Mo decreased but the contents of $Mo^{6+}$ species increases.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.372-372
• /
• 2012

We have studied a fabrication of Poly (3,4-ethylenedioxythiophene) (PEDOT) wire arrays and structures with various feature sizes from hundreds micrometers to tens nanometers. PEDOT is well-known as a conducting material, can be grown by a vapor pressure polymerization (VPP) method. The VPP technique is a bottom-up processing method that utilizes the organic arrangement of macromolecules to easily produce ordered aggregates. Also, liquid-bridge-mediated nanotransfer molding (LB-nTM), which was reported as a new direct patterning method recently, is based on the direct transfer of various materials from a mould to a substrate through a liquid bridge between them. The PEDOT nanowires grown by VPP method and transferred on a substrate to use LB-nTM method have been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and electrical properties.