• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.6
• /
• pp.11-16
• /
• 2021

In this paper, a quality inspection system was developed to identify the defective assembly of connectors used in automobile wiring. For waterproof connectors, an internal seal must be inserted for waterproofing. However, there are cases where it is omitted or double-inserted during production. An automatic inspection jig was designed using photosensors and touch switches to classify good and bad connector components. In the case of the existing visual inspection, 6,400 connectors were inspected when 5 people inspected for 8 hours. However, when using the inspection jig developed under the same conditions, 20,000 pieces were inspected. In other words, the productivity is greatly improved compared to the conventional visual inspection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1703-1710
• /
• 2008

As the performance of digital camera keeps going on, the digital camera becomes into wide use recently so that the number of digital images taken by digital camera is increased rapidly. Given the augmentation of digital images, the digital photo frame has appeared for storing and enjoying the digital image and receives attention as the price of digital frame becomes down. However, users with the existing digital frame only could display the digital images and stream media stored in local disk. In the paper, we design and implement a new digital photo frame baled on ubiquitous which could provide a more variety of service to the user. With the proposed digital photo frame, the user could obtain the environment information and the digital image from multimedia sensor network. The users also could enjoy the various stream media stored in the remote streaming server seamlessly. In addition, the user could update the digital image through the web site at anywhere.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1328-1331
• /
• 2002

Nowaday, almost of practical energy is come from the fossil fuel, such as coal, oil and gas those are limited and caused the environmental pollution. For these reason. solar energy is come into notice as a new alternative energy source to overcome the shortage of electricity in the $future^{(1)}$. In this paper, small PV system using photo sensor for tracking sun is developed and is verified by experiments.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.660-664
• /
• 2001

Ringbom Stirling engine which is a kind of low temperature difference model Stirling engine is manufactured and its characteristics are measured at some temperature differences. Pressure, displacer position and rotation speed are measured. Displacer position and rotation speed are detected by photo-sensor. The hot side of Ringbom Stirling engine is warmed by electric heater. The cold side of Ringbom Stirling engine is cooled by the air. This result may be useful for further design and manufacture of Ringbom Stirling engine. Also, it would be used as an educational material for mechanical engineering students.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.143-150
• /
• 2018

In this study, we designed and developed an underwater LED communication system composed of an LED and a photo sensor. In addition, we experimented with video data transmission in a water tank. Two communication modules were installed in the 3 m water tank, and the image data transmission test was successfully performed at a rate of 20 frames per second(FPS), image resolution of $480{\times}272$, and data communication speed of 4 Mbps.

• Journal of Sensor Science and Technology
• /
• v.21 no.4
• /
• pp.293-297
• /
• 2012

CsI:Gd crystal was grown by the Bridgeman method and its scintillation properties were investigated. The wavelength peak of the luminescence spectrum for the crystal excited by X-ray was 419 nm. The range of the spectrum was from 300 nm to 800 nm. The spectrum well matched to the quantum efficiency of a typical bi-alkali photo-multiplier tube(PMT). An energy resolution of 48.2 % was obtained for 662 keV ${\gamma}$-rays of $^{137}Cs$. The three decay times were obtained as a fast(557.4 ns, 42.2 %), intermediate (1.78 ${\mu}s$, 29.7 %) and slow (5.43 ${\mu}s$, 28.1 %) components, respectively.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.79-82
• /
• 2005

Recently the necessity of road data is still being increased in industrial society, so there are many repairing and new constructions of roads at many areas. According to the development of government, city and region, the update and acquisition of road data for GIS (Geographical Information System) is very necessary. In this study, the fusion method with range data(3D Ground Coordinate System Data) and Intensity data in stand alone LiDAR data is used for road extraction and then digital image processing method is applicable. Up to date Intensity data of LiDAR is being studied. This study shows the possibility method for road extraction using Intensity data. Intensity and Range data are acquired at the same time. Therefore LiDAR does not have problems of multi-sensor data fusion method. Also the advantage of intensity data is already geocoded, same scale of real world and can make ortho-photo. Lastly, analysis of quantitative and quality is showed with extracted road image which compare with I: 1,000 digital map.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.175-177
• /
• 2007

This paper presents for the torque characteristics and improving the efficiency of driving system of electric bicycle which applied IEWPM(Independently Excited Winding Permanent Magnet) motor. IEWPM motor can expand the number of phase from 3 phases to multiphase like SRM motor because stator windings are unconnected directly. BLDC motor raise rotor'-s electromagnetic torque per unit volume by using Spoke type permanent magnet. By using two photo sensor per phase and applying excited width, advance angle and bipolar control, we confirmed higher torque at a low speed, higher out-put at a high speed, and efficiency improvement at a wide speed control area.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.791-794
• /
• 2007

우리나라가 급속도로 고령화 사회로 진입하여 감에 따라 의료비 등 국민적 부담이 크게 증가하고 있는 추세에 있다. 본 논문에서는 노인들의 삶의 질을 제고하고, 국가적으로는 노인의료비 부담을 경감시킬 수 있는 노인케어 유비쿼터스 시스템 u-SCS(Ubiquitous Senior Care System)에 대하여 연구하였다. 본 u-SCS 시스템은 조도 센서에서 감지한 조도값의 차이를 분석하여 실내의 노인이 불을 끄고 켜고 한 정보를 파악한다. 이러한 점등 및 소등 시간에 대한 분석은 노인의 수면 시간 등 일상적인 노인 행동을 인지할 수 있는 정보이므로, 이를 기초로 노인들이 겪을 수 있는 건강상 문제나 일상 생활의 불편함을 해소하는데 중요한 기초 정보로 활용할 수 있다.