• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.350-350
• /
• 2011

The spin structure of Fe over layers on Cu (001), especially in region II is one of the unsolved problem for many years. We study the out - of - plane (OP) Fermi surfaces (FSs) of 7 monolayer Fe/Cu (001) films using angle resolved photo emission spectroscopy (ARPES). Ultrathin Fe was grown on Cu (001) substrate at room temperature and the experimental measurements were carried out at room temperature and low temperature. Fermi surfaces measured about $\frac{1}{4}$ of the Brillouin Zone (BZ) using photon energies ranging from 170 eV to 280 eV. Our results confirmed that ferromagnetic signal at 7 ML Fe on Cu (001) is nearly zero. These results are consistent with our recent x-ray magnetic circular dichroism (XMCD) and surface magneto - optic Kerr effect (SMOKE) experiments. Based on our observations we have made a simple model of this system, which explains all the experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.99-103
• /
• 2015

One-dimensional photonic crystals (1D PCs) were fabricated by RF sputtering technique on p-Si (100), and fused quartz substrates. The 1D PCs structures consisted of $TeO_x$ (x=1.42), and $SiO_2$ with the difference refractive index. In order to estimate the effect on a defect level within 1D PCs structures, samples were prepared with both normal, and defect mode. The structural and optical properties were confirmed by Scanning electron microscope (SEM), and Ultraviolet visible near-infrared spectrophotometer (UV-VIS-NIR) respectively. In the case of a 1D PC normal mode without defect layer, it had a photonic band gap (PBG) in the near infrared (NIR) region. In the case of a 1D PC defect mode with defect layer, it had a sharp transmission band owing to a defect level, and moved towards the longer wavelength after exposing He-Cd laser with a wavelength of 325 nm.

• YAKHAK HOEJI
• /
• v.47 no.3
• /
• pp.148-153
• /
• 2003

Skin moisture is an important factor in skin health. Measurement of moisture content can provide diagnostic information on the condition of skin. In this study, a portable near-infrared (NIR) system was newly integrated with a photo diode array detector that has no moving parts, and this system has been successfully applied for the evaluation of human skin moisture. Diffuse reflectance spectra were collected and transformed to absorbance using 1 nm step size over the wavelength range of 1100 nm to 2200 nm. Partial least squares regression (PLSR) was applied to develop a calibration model. For practical use for the evaluation of human skin moisture, the PLS model for human skin moisture was developed in vivo using the portable NIR system on the basis of the relative water content values of stratum corneum from the conventional capacitance method. The PLS model showed a good correlation. The calibration with the use of PLS model predicted human moisture with a standard error of prediction (SEP) of 3.5 at 1120∼1730 nm range. This study showed the possibility of skin moisture measurement using portable NIR system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.104-110
• /
• 2008

In this paper we proposed a new source-drain structure for N-type MOSFET which can suppress the output resistance reduction of a device in saturation region due to soft break down leakage at high drain voltage when the gate is biased around relatively low voltage. When a device is generally used as a switch at high gate bias the current level is very important for the operation. but in electronic circuit like an amplifier we should mainly consider the output resistance for the stable voltage gain and the operation at low gate bias. Hence with T-SUPREM simulator we designed devices that operate at low gate bias and high gate bias respectively without a extra photo mask layer and ion-implantation steps. As a result the soft break down leakage due to impact ionization is reduced remarkably and the output resistance increases about 3 times in the device that operates at the low gate bias. Also it is expected that electronic circuit designers can easily design a circuit using the offered N-type MOSFET device with the better output resistance.

• Journal of Photoscience
• /
• v.9 no.3
• /
• pp.41-43
• /
• 2002

PDT-mediated cyototoxicity basically depends on the penetrated light-dose into the tumor tissue. This limits the efficiency of PDT to the superficial tumor region typically less than 1 cm. The localized photochemical generation of reactive oxygen species, including singlet oxygen is known to increase expression of assortment of early response genes including heat shock protein. In order to increase PDT cytotoxicity in the treatment of solid tumor, it is desirable to combine PDT with other therapeutic effects. In this preliminary study we evaluated enhanced cytotoxicity from the PDT-mediated expression of thymidine kinase in a transfected tumor cell line. Two types of photo sensitizers, a hematoporphyrin derivative(Photogem, Russia) and aluminium sulphonated phthalocyanine(Photosense, Russia) were used to evaluate the overexpression of hsp-70 in PDT-treated cell. Transient increase of hsp-70 was observed at 6-8 hrs later following irradiation in the photosense-treated cell whereas it was not observed in Photogem-treated cell. In the presence of ganciclovia, transfected cell showed a 17％ increase in the cytotoxicity compared to the PDT only cell.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.76-80
• /
• 2018

In recent years, with the development of automobile technology, smart system technology that assists safe driving has been developed. A camera is installed on the front and rear of the vehicle as well as on the left and right sides to detect and warn of collision risks and hazards. Beyond the technology of simple black-box recording via cameras, we are developing intelligent systems that combine various computer vision technologies. However, most related studies have been developed to optimize performance in laboratory-like environments that do not take environmental factors such as weather into account. In this paper, we propose a method to detect object by restoring visibility in image with degraded image due to weather factors such as fog. First, the image quality degradation such as fog is detected in a single image, and the image quality is improved by restoring using an intermediate value filter. Then, we used an adaptive feature extraction method that removes unnecessary elements such as noise from the improved image and uses it to recognize objects with only the necessary features. In the proposed method, it is shown that more feature points are extracted than the feature points of the region of interest in the improved image.

• Current Photovoltaic Research
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2019

Most high-efficiency n-type silicon solar cells are based on the high quality surface passivation and ohmic contact between the emitter and the metal. Currently, various metalization methods such as screen printing using metal paste and physical vapor deposition are being used in forming electrodes of n-type silicon solar cell. In this paper, we analyzed the degradation factors induced by the front electrode formation process using e-beam evaporation of double passivation structure of p-type emitter and $Al_2O_3/SiN_x$ for high efficiency solar cell using n-type bulk silicon. In order to confirm the cause of the degradation, the passivation characteristics of each electrode region were determined through a quasi-steady-state photo-conductance (QSSPC).

• Convergence Security Journal
• /
• v.22 no.4
• /
• pp.141-146
• /
• 2022

The iris, a biometric information, is safe, unique, and reliable, such as fingerprints, and is personal information that can significantly lower the misrecognition rate than other biometric authentication. However, due to the nature of biometric authentication, it is impossible to replace it if it is stolen. There is a case in which an actual iris photo is taken and 3d printed so that the eyes work as if they were in front of the camera. As such, there is a possibility of iris leakage through high-definition images and photos. In this paper, we propose to improve iris masking performance by supplementing iris region masking research based on existing blurring techniques. Based on the results derived in this study, it is expected that it can be used for the security of video conference programs and electronic devices.

• International Journal of Knowledge Content Development & Technology
• /
• v.14 no.3
• /
• pp. 7-18
• /
• 2024

The present study focuses on the activities and efforts of the National Mission for Manuscripts (NMM) in the Uttar Pradesh region, which is known for its vast area, population, and rich cultural heritage. The aim is to examine the digitization work carried out by the NMM in this area, as digitization plays a crucial role in preserving our country's rich ancient heritage. The importance of safeguarding cultural heritage is universally acknowledged, and digitization serves as a vital tool in this endeavour. Through digitization, we can protect and preserve our heritage for future generations. The government has implemented several commendable initiatives for manuscript digitization, and the NMM stands as a prominent organization dedicated to the conservation of cultural heritage. The NMM possesses a diverse range of cultural heritage resources, including photographic slides, photographs, digital images, photo-negatives, motion pictures, audio spools, microfiche, LP records, endangered manuscripts, audio and videotapes, digital images, microfilms, digital audio and video files, and more. The mission has undertaken extensive digitization efforts to conserve and provide access to a significant portion of its collection. This study is unique as it explores the digital conservation and digitization practices of a premier institute working in the field of art and cultural heritage in Uttar Pradesh. With its extensive network of institutions, the mission aims to cover all manuscripts, digitize them, and consolidate them on a common platform for easy access and utilization.