• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.175-181
• /
• 2004

In order to increase the coupling efficiency of the Power and Phase of the active Phase way antenna, we have fabricated the active phased-array antenna which is coupled by the transmission line, and investigated the relationship between the length of the coupling transmission line and coupling power and phase. The following three types of driving method -(1) giving the frequency difference between the two active antenna, (2) applying the input signal to the one side of the two antennas, and changing the eigen frequency of the other side antenna, (3) appling the different phase inputs to the active antennas was investigated. The experimental results showed that the interval of the antenna elements has not affected the power and the phase of the antenna.

• Journal of information and communication convergence engineering
• /
• 제18권4호
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• ETRI Journal
• /
• 제34권4호
• /
• pp.617-620
• /
• 2012

The denoising mapping with the closest-neighbor clustering (CNC) method in denoise-and-forward two-way relay channels is studied. Specifically, the symmetry of the constellations in source terminals A and B is utilized to reduce the complexity of the CNC method. The specific case considered first to illustrate how the constellation symmetry works in the CNC method is the quadrature phase-shift keying constellation in A and B and the single-antenna deployment in all terminals. This case study shows that an enormous complexity reduction can be achieved. Next, the result is extended to multiple-antenna scenarios and square quadrature amplitude modulations.

• 한국정보통신학회논문지
• /
• 제21권5호
• /
• pp.913-920
• /
• 2017

본 개발에서는 위상 배열 안테나를 이용하여 전자적으로 빔을 회전하여 주변의 물표를 탐지할 수 있는 선박용 고정형 레이더를 제작하여 테스트하였다. 전자적인 회전 방식을 사용하는 고정형 레이더는 기존의 선박용 펄스 레이더의 문제점인 염분 및 해풍에 의한 부식과 회전축 마모문제를 해결할 수 있다. 또한 본 과제에서는 저출력 방식의 탐지방식인 FMCW 방식을 사용함으로써 고출력 레이더 사용으로 인한 인체에 대한 전파 피폭 문제와 마그네트론의 유지보수 비용 문제를 해결 할 수 있을 것으로 기대한다.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.199-205
• /
• 2015

An electromagnetic band gap (EBG) metamaterial construction is presented. A construction of a multipath mitigating ground plane, based on the EBG metamaterial is described. A method of the ground plane application and installation, which provides the multipath mitigating without spoiling antenna element phase center stability, is suggested and explained. A designed construction of GNSS antenna module, which contains the multipath mitigating ground plane, made from the presented EBG metamaterial and installed in the described way is shown and parameters of the antenna module are provided.

• 대한전자공학회논문지TC
• /
• 제41권2호
• /
• pp.19-29
• /
• 2004

최근 분산컴퓨팅 시스템은 서로 이질적인 시스템간 상호 연동성 문제를 해결하기 위한 새로운 시스템 아키텍처를 제시하고 있다. 통신시스템과 같이 제한적 실시간, 고성능 및 신뢰성을 요구하는 CORBA는 유연성, 효율성 및 예측성 등이 지원되어야한다. 본 논문에서는 개방형통신시스템용 소프트웨어를 지원하는 효율적인 CORBA 플랫폼 개발을 위해 2가지 방법을 제시한다. 첫째, 동일 호스트상에서 메시지 전달 오버헤드를 최적화하기 위해 공유 메모리 기반의 연동 프로토콜을 제시한다. 둘째, CORBA 플랫폼의 신뢰성 향상을 위해, 구현 객체 데이터베이스를 이용한 네이밍 서비스 서버 구현 방법과 제한적 실시간 특성 제공 방법을 제시한다. 따라서, 제안된 CORBA 플랫폼은 제한적 실시간 특성을 제공하고, 고성능이며 신뢰성 있는 네이밍 서버를 이용한 개방형 통신시스템에 적합한 소프트웨어 플랫폼임을 보인다. 본 논문은 플랫폼의 견고성이 요구되는 개방형통신시스템용 고성능 CORBA 플랫폼 설계 덴 구현에 목적을 둔다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.87-90
• /
• 2005

The FORMOSAT-3/COSMIC mission is a micro satellite mission to deploy a constellation of six micro satellites at low Earth orbits. The final mission orbit is of an altitude of 750-800 lan. It is a collaborative Taiwan-USA science experiment. Each satellite consists of three science payloads in which the GPS occultation experiment (GOX) payload will collect the GPS signals for the studies of meteorology, climate, space weather, and geodesy. The GOX onboard FORMOSAT -3 is designed as a GPS receiver with 4 antennas. The fore and aft limb antennas are installed on the front and back sides, respectively, and as well as the two precise orbit determination (POD) antennas. The precise orbit information is needed for both the occultation inversion and geodetic research. However, the instrument associated errors, such as the antenna phase center offset and even the different cable delay due to the geometric configuration of fore- and aft-positions of the POD antennas produce error on the orbit. Thus, the focus of this study is to investigate the impact of POD antenna parameter on the determination of precise satellite orbit. Furthermore, the effect of the accuracy of the determined satellite orbit on the retrieved atmospheric and ionospheric parameters is also examined. The CHAMP data, the FORMOSAT-3 satellite and orbit parameters, the Bernese 5.0 software, and the occultation data processing system are used in this work. The results show that 8 cm error on the POD antenna phase center can result in ~8 cm bias on the determined orbit and subsequently cause 0.2 K deviation on the retrieved atmospheric temperature at altitudes above 10 lan.

• 대한전자공학회논문지TC
• /
• 제47권7호
• /
• pp.128-134
• /
• 2010

본 논문에서는 저부엽과 저손실 특성을 갖는 고전력 20-출력 스트립라인 전력분배기를 설계, 제작하고 측정하였다. 20-출력전력분배기는 S 대역 선형 배열 안테나의 급전회로를 위해 설계되었으며, 좁은 빔폭과 매우 낮은 저부엽 특성을 위해 Dolph-Chebyshev 전류 분포를 활용하였다. 20-출력 전력분배기는 8-출력 분배기 1개, 4-출력 분배기 3개와 링 하이브리드 전력분배기 3개로 구성되었으며, 전력분배의 기본적인 구조로는 T-접합 분배 구조를 사용하였다. 삽입손실과 반사손실을 개선하기 위해서 노치를 T-접합 분배 구조에 적용하였으며 N형 커넥터와 스트립라인 사이의 천이구조를 수정하였다. 설계, 제작된 전력분배기는 대역 내에서 약 0.3 dB의 삽입손실과 8o 보다 작은 rms 위상 부정합 특성을 보였다. 20-출력 전력분배기 2개를 대칭적으로 구성할 경우 40 dB 이상의 저부엽 특성 결과를 20-출력 전력분배기 측정 결과로부터 합성할 수 있었다.