• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3181-3183
• /
• 1999

A CMOS two-stage oscillator applicable to requiring in- and quadrature-phase components such as RF and data retiming applications are presented using phase-look-ahead technique. This paper clearly describes the operation principle of the presented two-stage oscillator and the principle can be also applicable to the high speed high speed divide-by-two is usually used for prescaler of the frequency synthesizer. Also, the sucessful oscillation of the proposed oscillator using PLA is confirmed through the experiment. The test vehicle is designed using 0.8 ${\mu}m$ N-well CMOS process and it has a maximum 914MHz oscillation showing -75dBclHz phase noise at 100kHz offset with single 2V supply.

• 한국전자파학회논문지
• /
• 제23권11호
• /
• pp.1264-1271
• /
• 2012

고속 철도나 자동차와 같은 고속의 이동 환경에서 고속 데이터 전송을 위해서는 빠른 빔 추적 능력이 중요하다. 디지털 역지향성 안테나는 수신 신호의 방향에 대한 사전 정보 없이, 안테나 위상을 변화시킴으로써 신호를 수신된 방향으로 재전송을 할 수 있기 때문에 자동적으로 빔 추적이 가능하다. 또한, 디지털 역지향성 안테나는 아날로그 역지향성 안테나와 비교하여 수정과 업그레이드가 쉽다는 장점을 가진다. 본 논문에서는 AWGN과 다중 신호 환경에서 디지털 역지향성 안테나의 BER 성능을 분석하였다. 시뮬레이션 결과, 위상 검출기를 사용하여 역지향성 안테나의 정확한 위상 추적 및 위상 공액을 하는 것을 확인하였다. 두 번째 안테나의 위상 지연이 $15^{\circ}$ 발생할 경우에 위상 공액 기법을 사용하게 되면 사용하지 않았을 경우에 비해서 전력 효율이 1 dB 향상된다. 본 논문에서는 다중 신호가 존재할 경우에 역지향성 안테나에서의 성능을 논의하였다. 다중 신호나 간섭신호가 존재할 경우, 역지향성 안테나에서 직접파의 방향에 대해서 진폭 또는 위상 오차가 발생함을 확인할 수 있다.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1104-1111
• /
• 2003

본 논문에서는 직접 변환 방식의 수신기에서 발생하는 I 채널 및 Q 채널 간의 이득 및 위상 불일치를 보상하는 방법에 대해서 기술한다. 직접 변환 방식의 복조기에서의 이득 및 위상 불일치를 가변 스텝(Variable Step-size) 적응적 루프를 이용하여 블라인드(blind) 등화 방식으로 보상하는 알고리즘을 된 논문에서 제안한다. 이득 및 위상 불일치를 보상하기 위해 일반적인 블라인더 등화 기법을 이용할 경우 루프 이득에 따라 수렴속도와 지터(jitter) 영향이 trade-off 관계에 있다. 본 논문에서는 이들 문제를 극복하기 위하여 적응적 루프의 이득을 오차에 따라 가변 하는 방법을 제시한다. 본 논문에서는 가변 스텝 적응적 루프를 이용하여 빠른 수렴속도와 지터의 영향을 줄이도록 하는 방법을 제시하였고, 모의실험을 통하여 신호 손실 보상과 수렴 속도의 향상을 확인한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.249-257
• /
• 2007

A high resolution numerical method aimed at solving gas-liquid two-phase flow is proposed and applied to gas-liquid two-phase shock tube problem. The present method employs a finite-difference 4th-order Runge-Kutta method and Roe's flux difference splitting approximation with the MUSCL TVD scheme. By applying the homogeneous equilibrium cavitation model, the present density-based numerical method permits simple treatment of the whole gas-liquid two-phase flow field, including wave propagation and large density changes. The speed of sound for gas-liquid two-phase media is derived on the basis of thermodynamic relations and compared with that by eigenvalues. By this method, a Riemann problem for Euler equations of one dimensional shock tube was computed. Numerical results such as detailed observations of shock and expansion wave propagations through the gas-liquid two-phase media and some data related to computational efficiency are made. Comparisons of predicted results and exact solutions are provided and discussed.

• ETRI Journal
• /
• 제34권2호
• /
• pp.175-183
• /
• 2012

Conventional synchronization algorithms for impulse radio require high-speed sampling and a precise local clock. Here, a phase-locked loop (PLL) scheme is introduced to acquire and track periodical impulses. The proposed impulse PLL (iPLL) is analyzed under an ideal Gaussian noise channel and multipath environment. The timing synchronization can be recovered directly from the locked frequency and phase. To make full use of the high harmonics of the received impulses efficiently in synchronization, the switching phase detector is applied in iPLL. It is capable of obtaining higher loop gain without a rise in timing errors. In different environments, simulations verify our analysis and show about one-tenth of the root mean square errors of conventional impulse synchronizations. The developed iPLL prototype applied in a high-speed ultra-wideband transceiver shows its feasibility, low complexity, and high precision.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.93-98
• /
• 2005

Rewritable optical disk is one of the essential data storage media in these days, which takes advantage of the different optical properties in the amorphous and crystalline states of phase change materials. As well known, data transfer rate is one of the most important parameter of the phase change optical disks, which is mostly limited by the crystallization speed of recording media. Therefore, we doped Sn/Bi to $Ge_2Sb_2Te_5$ alloy in order to improve the crystallization speed and investigated the dependence of phase change characteristics on Sn/Bi doping concentration. The Sn/Bi doped $Ge_2Sb_2Te_5$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, UV-visible spectrophotometer, electron probe microanalysis (EPMA), inductively coupled plasma mass spectrometer (ICP-MS) and atomic force microscopy (AFM). Optimum doping concentration of Bi and Sn were 5${\~}$6 at.$\%$ and the minimum time for crystallization was below than 20 ns. This improvement is correlated with the simple crystalline structure of Sn/Bi doped $Ge_2Sb_2Te_5$ and the reduced activation barrier arising from Sn/Bi doping. The results indicate that Sn/Bi might play an important role in the transformation kinetics of phase change materials..

• The Journal of the Acoustical Society of Korea
• /
• 제23권1E호
• /
• pp.19-23
• /
• 2004

This paper presents an experimental technique to generate and detect axisymmetric longitudinal waves in a pipe by using piezoelectric cylindrical transducers. Radial pulses transmitted by one transducer have propagated in two opposite directions along the pipe, and other two transducers have received the propagating waves. The difference of the transit times measured for the waves in two paths of known distance difference has yielded the phase speed of the wave propagation. Wave speed has been measured in an empty pipe and in a water-filled pipe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.685-688
• /
• 1992

This paper studies the commutation phenomenon in the Brushless DC Motor with the trapezoidal BEMF waveform. It is shown that the torque ripple am the speed ripple due to the phase commutation depend on driving sytem, operating speed am load condition. The effects of resistance and BEMF flat width on torque ripple are considered. Speed - torque characteristics of the motor is presented considering the phase commutation. Uncommutating current control method can attenuate the torque ripple in the low speed region, and also minimize the switching loss am switching frequency. In this paper, the commutation phenomena are verified by analytical formulation and simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.660-664
• /
• 2004

The indirect rotor position detection method using terminal voltage of brushless DC motor (BLDCM) requires simple control circuit, and has wide speed range of sensorless operation. However, because the substantial phase difference exists between real back emf and terminal voltage, the existing indirect detection method using analog filter which is affected by frequency, speed, and load sensitively cannot be synchronized with current, in the end, it advances or delays. This paper presents new analog filter circuit design for rotor position estimation in order to solve the problem, and proposes novel sensorless operation method which is stable even in high speed range and not influenced by parameters with analysis on phase difference by load and speed. Moreover, the appropriateness of the proposed sensorless drive in this paper is verified and analyzed by experimentation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.983-985
• /
• 2001

Sensorless induction motor drive is much studied due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of induction motor including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of sensorless induction motor drive. However, the phase voltage does not have to be directly monitored because of switching noise, and they may be reconstructed by using the command voltage. The output voltage of SVPWM-VSI supplying the motor has a considerable error, especially in a low speed range because SVPWM-VSI has a poor resolution in a low command voltage. Such a voltage information effect in speed sensorless control of induction motor has been investigated in this paper.