• 제목/요약/키워드: phase match filter method

검색결과 8건 처리시간 0.022초

Dispersion of Rayleigh Waves in the Korean Peninsula

  • ;이기화
    • 지구물리
    • /
    • 제9권3호
    • /
    • pp.231-240
    • /
    • 2006
  • The crustal structure of the Korean Peninsula was investigated by analyzing phase velocity dispersion data of Rayleigh waves. Earthquakes recorded by three component broad-band velocity seismographs during 1999-2004 in South Korea were used in this study. The fundamental mode Rayleigh waves were extracted from vertical components of seismograms by multiple filter technique and phase match filter method. Phase velocity dispersion curves of the fundamental mode signal pairs for 14 surface wave propagation paths on the great circle in the range 10 to 80 sec were computed by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocity data of Rayleigh wave were inverted. All the result models can be explained by a rather homogeneous crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to about 33 km depth without any distinctive crustal discontinuities and an uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec. Our results turn out to agree well with recent study of Cho et al. (2006 b) based on the analysis of seismic background noises to recover short-period (0.5-20 sec) Rayleigh- and Love-wave group velocity dispersion characteristics.

  • PDF

한반도의 레일리파 분산에 대한 연구 (DISPERSION OF RAYLEIGH WAVES IN THE KOREAN PENINSULA)

  • 조광현;이기화
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 공동학술대회 논문집
    • /
    • pp.29-36
    • /
    • 2005
  • 본 연구에서는 표면파 분산 분석을 이용하여 한반도에 설치된 광대역 관측소 사이의 지각 및 상부맨틀의 지진파 속도 구조를 연구하였다. 표면파 분산 분석의 two station method를 사용하여 관측소 사이의 지진파 속도구조를 구하였다. 표면파 분산 분석에서 레일리파의 기본모드 신호를 분리하기 위하여 MFT(multiple filter technique) 방법과 PMF(phase match filter) 방법을 이용하였다. Two station method에 의해 두 관측소 사이의 표면파 위상속도 분산곡선을 계산하였으며, 모든 지진원에 대하여 각 경로의 표면파 위상속도 분산곡선을 중합하여 역산에 사용하였다. 역산 결과 각 관측소 사이 경로에서 중합 표면파 분산곡선에 가장 잘 부합되는 지진파 속도 구조를 얻었다. 표면파 위상속도 분산곡선 역산 결과. 두 관측소 사이 표면파 진행 경로의 평균적인 지구구조로서 총 14 개의 관측소 사이의 S파 속도구조를 구하였다. 모든 지구구조는 지표로부터 33 km 까지 약 2.8-3.25 km/s의 속도의 지각과 33 km 이후 약 4.55-4.67km/s의 속도의 상부 맨틀로 구성된다.

  • PDF

주택용 단상 ESS-PCS의 LC 필터위치에 따른 상용변압기의 특성 (Characteristics of Utility Transformer on Household Single-Phase ESS-PCS According to LC Filter Location)

  • 김용중;김효성
    • 전력전자학회논문지
    • /
    • 제23권2호
    • /
    • pp.101-105
    • /
    • 2018
  • Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.

시간경과 탄성파 자료의 교차균등화를 위한 제약적 최적 맞춤필터링 방법 (A Constrained Optimum Match-filtering Method for Cross-equalization of Time-lapse Seismic Datasets)

  • 최윤경;지준
    • 지구물리와물리탐사
    • /
    • 제15권1호
    • /
    • pp.23-32
    • /
    • 2012
  • 저류층 감시(reservoir monitoring)를 위해서는 시간경과(time-lapse) 탄성파 자료들을 비교하는 방법이 주로 사용되며, 시간경과 탄성파자료로부터 저류층에서의 변화에 의한 차이만을 추출해 내는 기술이 핵심이라 할 수 있다. 본 논문에서는 시간경과 탄성파자료로부터 저류층에서의 변화만을 추출하기 위한 방법으로 기존의 교차균등화(crossequalization) 방법과 개선된 최적화 방법을 실험 및 비교해 보았다. 기존의 방법론으로는 주파수 띠폭 균등화(bandwidth equalization)와 위상보정(phase rotation)을 주파수 영역과 시간 영역 그리고 혼합영역에서 각각 구현하여 그 성능을 비교해 보았으며, 이러한 방법들이 갖고 있는 고주파수가 손실되는 한계를 극복할 수 있는 제약적 최적화 필터링(constrained optimum filtering) 방법론을 제안 및 실험해 보았다. 새로이 제안된 제약적 최적화 필터링 방법은 최적화된 맞춤필터를 구함으로써 저류층 변화성분의 주파수띠폭을 넓히는데 개선된 결과를 보여주었다.

전동기 친화형 출력필터를 이용한 영구자석 동기전동기의 센서리스 구동 성능 향상 (Performance Improvement of Sensorless PMSM Drives using Motor Friendly Output Filter)

  • 부한영;백승훈;한상훈;조영훈
    • 전력전자학회논문지
    • /
    • 제25권4호
    • /
    • pp.329-332
    • /
    • 2020
  • A back-electromotive force (back-EMF) estimator for a permanent magnet synchronous motor (PMSM) uses the three-phase voltage references of a current controller to estimate rotor position. However, owing to voltage drops caused by the nonlinear characteristics of switches and passive components, the actual voltage in the motor and the three-phase voltage reference may not match. This study proposes a sensorless control method using a sine-wave output filter applied between the motor drive system and PMSM. The precise voltage in the motor can be measured with the sine-wave output filter and applied to the input of the estimator. Moreover, given that the voltage in the motor can be measured precisely at extremely low speeds, the stable operation range of the back-EMF estimator can be secured. Experimental results show that the proposed sensorless control method has stable operation at extremely low speeds compared with conventional sensorless control.

위성 중계기용 이중모드 도파관 필터의 튜닝에 관한 연구 (A New Tuning Method of Dual-Mode Waveguide Filters for Satellite Transponder)

  • 이주섭;엄만석;염인복;이성팔
    • 한국전자파학회논문지
    • /
    • 제14권8호
    • /
    • pp.839-844
    • /
    • 2003
  • 위성 중계기의 무게와 부피를 최소화 하기 위하여 입력 멀티플렉서 및 출력 멀티플렉서에 사용하는 채널 필터는 이중모드 도파관 필터를 많이 사용한다. 또한 입력 멀티플렉서는 일반적으로 채널이 서로 독립적이기 때문에 이에 사용하는 채널 필터는 이중종단형으로 설계하며, 매니폴드(manifold) 형태의 출력 멀티플렉서의 경우 채널 필터는 단일종단형으로 설계한다. 본 논문에서는 위성 중계기에 많이 적용되는 단일종단 및 이중종단 이중모드 도파관 필터의 튜닝 방법에 관하여 기술하였다. 필터의 튜닝은 한쪽면이 단락된 더미 공동(dummy cavity)을 이용하며, 측정된 반사계수의 위상 응답을 계산된 이론치에 정합시키는 과정으로 튜닝을 진행한다. 이러한 튜닝방법을 4차 이중종단 이중모드 타원응답 필터와 6차 단일종단 이중모드 타원응답 필터에 적용하여 튜닝함으로써 제안한 튜닝방법의 유용성을 확인하였다.

분무 액적 특성 계측을 위한 디지털 입자 홀로그래피 시스템의 개발 (Development of Digital Particle Holographic System for Measurements of the Characteristics of Spray Droplets)

  • ;강보선
    • 한국분무공학회지
    • /
    • 제15권2호
    • /
    • pp.53-60
    • /
    • 2010
  • This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

건축구조물의 지진응답제어를 위한 시스템 식별의 실험적 연구 (Experimental Study of System Identification for Seismic Response of Building Structure)

  • 주석준;박지훈;민경원;홍성목
    • 한국지진공학회논문집
    • /
    • 제3권4호
    • /
    • pp.47-60
    • /
    • 1999
  • 건축구조물의 진동제어 시스템의 안정성과 효율성은 대상 시스템의 수학적 모델의 정확성에 크게 좌우 된다. 본 연구에서는 3층의 축소 건물모델과 소형 AMD(active mass damper)를 대상으로 각각의 상태방정식 모델을 시간영역에서의 시스템 식별 기법인 OKID(observer/Kalman filter identification)를 대상으로 각각의 상태방정식 모델을 시간영역에서의 시스템 식별 기법인 입력과 AMD의 이동질량체의 설치층에 대한 상대가속도 입력에 대하여 시스템 식별을 개별적으로 수행한 뒤 두 개의 상태방정식을 모델 응축 과정을 통해 통합하였다. AMD의 시스템 식별은 모터제어 신호를 입력으로 AMD 이동질량의 설치층에 대한 상대가속도를 출력으로 선정하여 수행하였으며 큰 감쇠비와 위상지연 현상을 확인할 수 있었다 결과적으로 얻어진 건물 모델 및 AMD의 이동질량의 설치층에 대한 상대가속도를 출력으로 선정하여 수행하였으며 큰 감쇠비와 위상지연 현상을 확인할수 있었다. 결과적으로 얻어진 건물 모델 및 AMD의 상태방정식 모델로부터 재구성한 전달함수와 시간이력은 실험에서의 측정치와 잘 일치하였다.

  • PDF