• 태양에너지
• /
• 제15권1호
• /
• pp.39-51
• /
• 1995

다공질 물질 속에서 일어나는 저속 유동(Darcy Flow)에 동반한 열 및 물질 전달 문제를 해석하기 위한 새로운 수치 해석 기법이 소개되고 간단한 예제를 통하여 그 성능을 평가하였다. 본 연구의 수치 해석법은 다공질 물질 속에서 일어나는 모든 전달 현상에서 중요한 확산효과(Dispersion Effect)를 쉽게 처리할 수 있으며 특히 미정 경계선 문제(Moving Boundary Problem) 해석에도 효과적으로 적용될 수 있어 응용 범위가 넓을 것으로 기대된다.

• 에너지공학
• /
• 제13권2호
• /
• pp.152-160
• /
• 2004

The present study investigates on the experimental and numerical results of heat transfer in the acoustic fields induced by ultrasonic waves. The strong upwards flow which moves from the bottom surface in a cavity to the free surface called as "acoustic streaming" was visualized by a particle image velocimetry (PIV). In addition, the augmentation ratio of heat transfer was experimentally investigated in the presence of acoustic streaming and was compared with the profiles of acoustic pressure calculated by the numerical analysis. A coupled finite element-boundary element method (FE-BEM) was applied for a numerical analysis. The results of experimental and numerical studies clearly show that acoustic pressure variations caused by ultrasonic waves in a medium are closely related to the augmentation of heat transfer.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.185-197
• /
• 1999

Heat transfer and solidification of liquid silicon in von-$K{\acute{a}}rm{\acute{a}}n$ swirling flow is investigated. The moving boundary is fixed for all times by a coordinate transformation, and finite difference method Is used to obtain the instantaneous location of the solid-liquid Interface and the heat transfer from the surfaces of solid and liquid. For small Stefan number or low wall temperature, the transient heat transfer from the surface of solid(QS(t)) is much larger than that from the liquid side of solid-liquid interface(QL(t)) and QL(t) reaches its quasi-steady-state value much faster than QS(t).

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.952-961
• /
• 1989

본 연구에서는 널리 사용되는 핀-관 직교류 열교환기의 정상 상태를 예측 하기 위하여 냉매의 상변화에 따른 유체의 물성치, 열전달계수 및 마찰계수의 변화와 관벽에서의 축방향 열전도를 고려한 모형을 세우고 이를 분석하여 열교환기의 종합적 인 특성을 규명하고자 한다.

• 설비공학논문집
• /
• 제1권4호
• /
• pp.319-329
• /
• 1989

Heat transfer phenomena during inward melting and solidification process of the phase change material were studied expertimentally. The phase change medium was 99% pure n-docosane paraffin ($C_{22}H_{46}$). The solid-liquid interface motion during phase change was recorded photographically. Measurements were made on the temperature, the solid-liquid interface, the melted or frozen mass and the various energy components stored or extracted from the cylinder wall. For melting, the experimental results reaffirmed the dominant role played by the conduction at an early stage, by the natural convection at longer time. For solidification, natural convection effects in the superheated liquid were modest and were confined to short freezing time. Although the latent energy is the largest contributor to the total stored or extracted energy, the aggregate sensible energies can make a significant contribution, especially at large cylinder wall superheating or subcooling, large initial phase change material subcooling or superheating.

• 태양에너지
• /
• 제11권1호
• /
• pp.69-77
• /
• 1991

파라핀 왁스에 열에너지를 저장하기 위해 열전달 기구로 원판형 핀이 달린 열싸이폰을 사용하였다. 실험은 4, 6, 8개의 핀에 대해 수행되었으며 각각의 경우 왁스의 초기온도와 주입열량을 변화시키면서 실험을 반복하였다. 실험을 통하여 특히 잠열 축열계의 전열경로의 주요지점에서의 열전달 특성을 규명하고자 하였으며 주요 결론은 다음과 같다. (1) 열싸이폰의 열관류율과 총합열관류율은 핀의 수가 증가함에 따라 커지나 핀과 왁스사이의 열전달계수는 감소하였다. (2) 핀에 의해 열전달이 촉진됨으로서 핀이 없는 열싸이폰에서 일어나는 dry-out 현상이 제거되었다. (3) 수평형의 핀은 왁스의 큰 규모의 대류를 억제하며 핀의 수가 증가함에 따라 핀 사이에서의 국소대류도 더욱 억제되었다.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.459-465
• /
• 2013

열연 판재 제조과정에서는 제품의 강도와 인성을 제어하기 위해 압연 직후 $800^{\circ}C$ 이상의 고온 소재를 수냉각 방식으로 급속 냉각시킨다. 이 과정에는 소재 표면과 냉각수 사이의 비등 열전달 현상과 소재 표면에 쌓이는 체류수의 자유표면 유동, 소재의 고속 주행 등 매우 복잡한 물리현상들을 포함하고 있다. 본 연구에서는 이 모든 물리 현상들을 수치적으로 모델링한 해석 모델을 적용하여 기본 열전달 해석을 수행한다. 실제로 소재는 냉각에 의해 내부에서 오스테나이트로부터 페라이트로 상변태가 일어나고 이로 인해 소재의 국부적인 열물성치의 변화가 발생하지만 본 연구에서는 상변태를 직접 푸는 방법 대신 이미 알려진 소재의 온도에 따른 물성변화 곡선을 이용하여 냉각해석을 수행하고 이를 기존의 일정 물성치 조건에서 해석한 결과와 비교하여 소재의 물성변화가 소재 냉각에 미치는 영향과 상변태 해석의 필요성에 대해 검토하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1488-1502
• /
• 2005

A three dimensional model was developed to analyze the mold filling and solidification in the casting processes. The model uses the VOF method for the calculation of the free surface and the modified Equivalent Specific Heat method for the treatment of the latent heat evolution. The solution procedure is based on the SIMPLER algorithm. The complete model has been validated using the exact solutions for phase change heat transfer and the experimental results of broken water column. The three-dimensional model has been applied to the benchmark test and the results were compared to those from experiment, a two-dimensional analysis, and another three dimensional numerical model.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3017-3029
• /
• 2023

In the late in-vessel phase of a nuclear reactor severe accident, the internal heat transfer and crust evolution during the debris bed melting process have important effects on the thermal load distribution along the vessel wall, and further affect the reactor pressure vessel (RPV) failure mode and the state of melt during leakage. This study coupled the phase change model and large eddy simulation to investigate the variations of the temperature, melt liquid fraction, crust and heat flux distributions during the debris bed melting process in the hypothetical severe accident of HPR1000. The results indicated that the heat flow towards the vessel wall and upper surface were similar at the beginning stage of debris melting, but the upward heat flow increased significantly as the development of the molten pool. The maximum heat flux towards the vessel wall reached 0.4 MW/m². The thickness of lower crust decreased as the debris melting. It was much thicker at the bottom region with the azimuthal angle below 20° and decreased rapidly at the azimuthal angle around 20-50°. The maximum and minimum thicknesses were 2 and 90 mm, respectively. By contrast, the distribution of upper crust was uniform and reached stable state much earlier than the lower crust, with the thickness of about 10 mm. Moreover, the sensitivity analysis of initial condition indicated that as the decrease of time interval from reactor scram to debris bed dried-out, the maximum debris temperature and melt fraction became larger, the lower crust thickness became thinner, but the upper crust had no significant change. The sensitivity analysis of in-vessel retention (IVR) strategies indicated that the passive and active external reactor vessel cooling (ERVC) had little effect on the internal heat transfer and crust evolution. In the case not considering the internal reactor vessel cooling (IRVC), the upper crust was not obvious.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.75-80
• /
• 2005

The present work was undertaken to numerically analyze the defrosting phenomena of windshield glass. In order to analysis the phase change from frost to water on windshield glass by discharging hot air from a defroster nozzle, the flow and the temperature field of the cabin interior, the heat transfer through the windshield glass, and the phase change of frost should be solve simultaneously. In the present work, the flow field was obtained by solving 3-D incompressible Navier-Stokes equations, and the temperature field was computed from the incompressible energy equation. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change of the driven cavity were calculated. The calculation showed a good agreement with other numerical results. Then, the present code was applied to the defrosting problem of a real automobile, and a good agreement with the experimental data was also obtained.