• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2006

This paper deals with an analysis of SCR thyristor switching pattern for a power quality disturbance generator with phase jump function. The proposed generator can be applied to the performance test of custom power devices. Voltage sag, swell, outage, unbalance and phase jump after outage are provided by the generator. The phase jump operating principle of the generator is described and analysed. Especially, a proper switching of the SCR thyristors for the proposed generator is important to guarantee the system reliability. Therefore the switching patterns for the thyristors in each made were analysed.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.44-53
• /
• 2002

Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis for the filling and packing phases. Molding troubles like flow mark weld line, sink ma가 short shot and warpage car be caused by these injection molding process factors. Among them the short shot was caused by the fact that the packing pressure could not reach properly to the filling end part in the packing phase and hence the flow rate could not be supplied to the full. In addition as the flow rate for the volumetric shrinkage during the f개zen phase could not be supplied Properly by the packing pressure, the short shot appeared. Here, the volumetric shrinkage reduced with increasing the packing pressure and also the warpage of molded part increased with increasing the packing Pressure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2006

The single phase switched reluctance motor(SRM) is simpler in control circuit because the number of switching devices is fewer than the poly phase SRM. The energy density per unit volume is very big because all stator poles are excited simultaneously by a single switching power source. But it must be provided a starting device on account of not being generated the starting torque at specific rotor positions. And also it has some demerits that have a torque ripple, noise and vibration because of being excited by switching pulse power source. Therefore, to make up for these demerits, it is realized many studies for the structure design used by computer and the operating methods by power electronics technique. In this paper, we'll present the comparison of the single phase SRM with the various rotor pole face types, as like stepped rotor pole face type and general rotor pole face type. For the torque characteristics analysis.

• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.119-123
• /
• 1999

Test of the optimum condition of solid phase micro extraction(SPME) was performed by use of 5 vol-atile components in dilute aqueous solution. Volatile components of Sancho(Zanthoxylum schinifolium) were isolated by SPME method and were analyzed by GC/MSD and compared with volatile compone-nts isolated by simultaneous distillation extraction (SDE) method. Total 31 components were identified by comparing gas chromatography retention time and mass spectral data. The major compounds were limonene geranyl acetate $\beta$-phellandrene phellandral mycene linalool rose oxide caproic acid and caprylic acid SPME sampling procedure was found to be a good method for qualitative analysis of the volatile components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.672_673
• /
• 2009

In this paper seeks the parameter which relates with the efficiency from premium efficiency level single-phase induction motor. Also it compares with the parameters and it analyzes and an optimum parameter it seeks by FEM. Consquently, a optimal design is accomplished from the this paper. Also parameters compare efficiency. And it analyzes and studies about optimum parameter by FEM. The sample single-phase induction motor selection selected existing premium level motor. We analyze each parameter using 2-D finite element analysis (FEM). According to Study of losses and Design flow, losses and efficiency can be explain by many parameter. So this paper present optimal parameters. Finally, this paper presents the method which raises the efficiency of premium efficiency level single-phase induction motor.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1692-1699
• /
• 2015

This paper presents an analysis of the mechanism of failure modes in bi-directional phase-shift full-bridge converters, composed of MOSFET, based on the circuit operation and parasitic parameters of MOSFET. In addition, the relation between circuit operation and parameters is suggested through an experimental comparison. From this relation, the suitable ranges of parameters for stable performance are analyzed. The design criteria of the bi-directional phase-shift full-bridge converter are presented and evaluated from the experimental verification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.908-913
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes appear. The proposed analytical method is verified by observing a good agreement to three dimensional finite element analysis results. All natural frequency of the in-phase modes can be predicted well by the combination of the dry beam modes. The theoretical prediction for the out-of-phase mode can be improved by using the polynomial functions satisfying the plate boundary conditions and fluid volume conservation instead of using dry beam modes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.46-49
• /
• 2004

Switched Reluctance Motor(SRM) has been researched for its superior characteristics. The SRM drive system has simple mechanical and magnetic structure, and it requires simple power electronic drive circuit. It is to be compatible to wide range adjustable speed drive system because it has the same driving characteristics of DC series motor's, easy control principle and high efficiency characteristics. In this paper, 2 types of excitation strategy are researched. Conventional 1-phase excitation and 2-phase excitation method are compared and tested. Though 1-phase excitation method is robust and has high performance, 2-phase excitation method has some merit in appling power device. Some simulation and test results are foaled with some analysis.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.90-98
• /
• 2003

This paper presents a performance analysis in steady-state of a novel type Auxiliary Resonant Commutation Snubber-linked 3-level 3-phase voltage source soft switching inverter suitable and acceptable for high-power applications in comparison with other three types of 3-level 3-phase voltage source soft switching inverters. This soft switching inverter operation which can operate under a condition of Zero Voltage Switching (ZVS). The practical steady -state performances of this inverter are illustrated and evaluated on the basis of the experimental results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권10호
• /
• pp.470-476
• /
• 2005

In this paper PU control scheme is presented. The proposed scheme has following features. The one is oft-starting method which is used for preventing to flow large current in motor phase winding when motor starts. The ther is the selection of the level of the over current. The first feature is implemented by increasing the PWM duty lowly, the second feature is implemented by limiting the magnitude of the phase current level by which the over heat f motor by copper losses and magnetic saturation decreases. By the analysis using FEM considering load condition, the peed of mode transition from PW to single pulse control is selected and confirmed by simulation that there is no ver current occurs during the mode transition. For the verification of proposed scheme, the simulation using MATLAB Simulink with considering non-linearity of inductance profile from FEM analysis is performed and the experiment with SRM drive system which has the DSP controller and single Phase SRM are peformed.