• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.186-191
• /
• 2006

In the present study, an attempt has been made to produce hybrid yeast strains of different useful and dominant characteristics. The hybrid yeast strains were produced by electrofusion and their genetic analysis were performed by RAPD-PCR (random amplified polymorphic DNA-polymerase chain reaction). The protoplast of Saccharomyces cerevisiae KCTC 7904 and Zygosaccharomyces rouxii KCTC 7966 were obtained above 92% when treated with lyticase at $30^{\circ}C$ for $60{\sim}90$ min after the pretreatment of $1{\sim}2%$ 2-mercaptoethanol at $30^{\circ}C$ for $15{\sim}20$ min. The fusant was produced from paired protoplast stage under the electric pulse at high frequency conditions (1.5 MHz/50 pV, 615 $V/256\;{\mu}sec$) within glass-platinum made electrofusion chamber. Changes in RAPD patterns in mother cells and hybrid cells proved that the fusant contains two types of yeast gene originated from its parent. Furthermore, fermentation characters exhibits by the fusant cell confirmed its genetic changes. These results suggest that genetically stable hybrid yeast strains of economic importance can be produced by electrofusion technique and these electrofused yeast cells have an enormous impact in biotechnology and biomedicine.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1354-1360
• /
• 2018

The aim of this study was to develop a simple, environmentally friendly synthesis of silver nanoparticles (SNPs) without the use of chemical reducing agents by exploiting the extracellular synthesis of SNPs in a culture supernatant of Bacillus thuringiensis CH3. Addition of 5 mM $AgNO_3$ to the culture supernatant at a ratio of 1:1 caused a change in the maximum absorbance at 418 nm corresponding to the surface plasmon resonance of the SNPs. Synthesis of SNPs occurred within 8 hr and reached a maximum at 40-48 hr. The structural characteristics of the synthesized SNPs were investigated by various instrumental analysis. FESEM observations showed the formation of well-dispersed spherical SNPs, and the presence of silver was confirmed by EDS analysis. The X-ray diffraction spectrum indicated that the SNPs had a face-centered cubic crystal lattice. The average SNP size, calculated using DLS, was about 51.3 nm and ranged from 19 to 110 nm. The synthesized SNPs exhibited a broad spectrum of antimicrobial activity against a variety of pathogenic Gram-positive and Gram-negative bacteria and yeasts. The highest antimicrobial activity was observed against C. albicans, a human pathogenic yeast. The FESEM observations determined that the antimicrobial activity of the SNPs was due to destruction of the cell surface, cytoplasmic leakage, and finally cell lysis. This study suggests that B. thuringiensis CH3 is a potential candidate for efficient synthesis of SNPs, and that these SNPs have potential uses in a variety of pharmaceutical applications.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1489-1500
• /
• 2018

Honey is made from flower nectar by honey bees. In this study, 120 honeys from various flowers and across eight different provinces in Korea were collected and their components, antioxidants, and hemolytic activities against red blood cell were evaluated. Our results show that total polyphenol (TP) varied widely across the samples, with chestnut honey showing the highest TP ($77.1{\pm}8.4mg/100g$), protein content ($25.9{\pm}0.9mg/100g$), and absorbance at 400 nm ($A_{400}$ : $0.156{\pm}0.036$). In contrast, the acacia honey and sugar honey had a TP of 9.5~30 mg, 12~15 mg/100g of, and the lowest $A_{400}$ of $0.06{\pm}0.02$. High amounts of total flavonoid were quantified in the jujube and chestnut honeys at $8.73{\pm}7.31$ and $8.39{\pm}3.02mg/100g$, respectively. No samples demonstrated hemolytic activity up to 1 mg/ml. Antioxidant activities determined by DPPH, ABTS, and nitrite scavenging placed the chestnut honey highest, followed by jujube, styrax, multi-floral, citrus, acacia and sugar honey. Analysis of parameter correlations indicated that the components and bioactivity of the honey are dependent on the origin of the flower rather than on bee-farming regions. A positive correlation between TP content and antioxidant activity was identified. The correlation coefficients between $A_{400}$ and the TP, ABTS scavenging, and reducing power values were 0.804, 0.772 and 0.741, respectively. We therefore suggest that $A_{400}$ could be used as a noble, economic and simple factor for honey quality evaluation. Our results can potentially be used to develop functional honey for the food and pharmaceutical industries.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.25-38
• /
• 2020

Photoelectrochemical water splitting has been considered as the most promising technology for generating hydrogen energy. Transition metal dichalcogenide (TMD) compounds have currently attracted tremendous attention due to their outstanding ability towards the catalytic water-splitting hydrogen evolution reaction (HER). Herein, we report the synthesis method of various transition metal dichalcogenide including MoS₂, MoSe₂, WS₂, and WSe₂ nanosheets as excellent catalysts for solar-driven photoelectrochemical (PEC) hydrogen evolution. Photocathodes were fabricated by growing the nanosheets directly onto Si nanowire (NW) arrays, with a thickness of 20 nm. The metal ion layers were formed by soaking the metal chloride ethanol solution and subsequent sulfurization or selenization produced the transition metal chalcogenide. They all exhibit excellent PEC performance in 0.5 M H₂SO₄; the photocurrent reaches to 20 mA cm^-2 (at 0 V vs. RHE) and the onset potential is 0.2 V under AM1.5 condition. The quantum efficiency of hydrogen generation is avg. 90%. The stability of MoS₂ and MoSe₂ is 90% for 3h, which is higher than that (80%) of WS₂ and WSe₂. Detailed structure analysis using X-ray photoelectron spectroscopy for before/after HER reveals that the Si-WS₂ and Si-WSe₂ experience more oxidation of Si NWs than Si-MoS₂ and Si-MoSe₂. This can be explained by the less protection of Si NW surface by their flake shape morphology. The high catalytic activity of TMDs should be the main cause of this enhanced PEC performance, promising efficient water-splitting Si-based PEC cells.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.492-500
• /
• 2016

In this study, the effects of Colpomenia sinuosa (CS) extract on serum lipid level and bone formation in an ovariectomized animal model were investigated. Twenty four nine-week old female Sprague-Dawley rats were randomly assigned to four groups: sham-operated rats (SHAM), ovariectomized control rats (OVX-CON), and ovariectomized rats supplemented with CS extract at 50 mg/kg bw (OVX-CS50) or 200 mg/kg bw (OVX-CS200). Three OVX groups were surgically ovariectomized while the SHAM group was sham-operated. CS extract was orally administrated at 1 mL per day. Analysis of serum lipid contents found that the total cholesterol, triglyceride, and low density lipoprotein cholesterol levels in the OVX-CON group were higher than those in the SHAM group. Notably, upon administration of CS extract after ovariectomy, triglyceride levels tended to significantly decrease. In addition, platelet aggregation ability decreased in groups treated with CS extract compared to the OVX-CON group. Serum alkaline phosphatase activity as an indicator of bone formation was lower in the CS extract group compared to the OVX-CON group. Collagen contents in bone and cartilage were reduced by ovariectomy, whereas the CS extract-supplemented groups exhibited higher concentrations in bone. According to these results, CS extract improved serum lipid parameters and osteogenesis in ovariectomized rats.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.649-656
• /
• 2012

To obtain the basic information for agricultural utilization of germanium (Ge), the growth characteristics and Ge absorption in rice plant were investigated under different Ge concentrations by foliar spray application. The Ge concentrations were treated with 0 (control), 10, 20, 40 and $80mg\;L^{-1}$ in pot (1 5000$^{-1}$ a), respectively. The Ge absorption rate in rice by foliar spray application with $80mg\;L^{-1}$ in pot was higher in the order of leaf (5.75%) > stem (4.52%) > root (<0.01%). By foliar spray application, the Ge content in rice was higher in the order of $80mg\;L^{-1}$ > $40mg\;L^{-1}$ > $20mg\;L^{-1}$ > $10mg\;L^{-1}$. When rice was treated with $80mg\;L^{-1}$ of Ge, the Ge content in rice grain was higher in the order of rice bran ($0.21mg\;pot^{-1}$) $\gg$ brown rice ($0.04mg\;pot^{-1}$) ${\geq}$ polished rice ($0.03mg\;pot^{-1}$). By foliar spray application, the Ge uptake in rice bran was higher than that in other parts. Therefore, optimum Ge concentration by foliar spray application was $80mg\;L^{-1}$ in pot based on the results from the Ge treatments.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.69-79
• /
• 2016

Lithium ion battery with high energy density is expanding its application area to electric automobile and electricity storage field beyond existing portable electric devices. Such expansion of an application field is demanding higher characteristic and stable long life characteristic of an anode material, the natural graphite that became commercialized in lithium ion battery. This thesis produced cathode by using natural graphite anode material, analyzed creation of the cathode SEI film created due to initial reaction by using electrolyte additives, VC (vinylene carbonate), VEC (vinyl ethylene carbonate), and FEC (fluoroethylene carbonate), and considered correlation with the accompanying electrochemical transformation. This study compared and analyzed the SEI film variation of natural graphite cathode according to the electrolyte additive with SEI that is formed at the time of initial filling and cathode of $60^{\circ}C$ life characteristic. At the time of initial filling, the profile showed changes due to the SEI formation, and SEI was formed in No-Additive in approximately 0.9 V through EVS, but for VC, VEC, and FEC, the formation reaction was created above 1 V. In $60^{\circ}C$ lifespan characteristic evaluation, the initial efficiency was highest in No-Additive and showed high contents percentage, but when cycle was progressed, the capacity maintenance rate decreased more than VC and FEC as the capacity and efficiency at the time of filling decreased, and VEC showed lowest performance in efficiency and capacity maintenance rate. Changes of SEI could not be verified through SEM, but it was identified that as the cycle of SEI ingredients was progressed through FT-IR, ingredients of Alkyl carbonate ($RCO_2Li$) affiliation of the $2850-2900cm^{-1}$ was maintained more solidly and the resistance increased as cycle was progressed through EIS, and specially, it was identified that the resistance due to No-Additive and SEI of VEC became very significant. Continuous loss of additives was verified through GC-MS, and the loss of additives from partial decomposition and remodeling of SEI formed the non-uniform surface of SEI and is judged to be the increase of resistance.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.30-37
• /
• 2009

Tissue-type plasminogen activator (t-PA) is a thrombolytic agent important in fibirn clot lysis. T-PA causes fibirn-specific plasminogen activation. Six binary vectors harboring t-PA and its derivative genes were cloned and expressed in transgenic alfalfa plants. The insertion of the t-PA and its derivative genes in genomic DNA of alfalfa plants was confirmed by PCR. The presence of the t-PA and its derivative transcripts in total RNAs of the transgenic alfalfa leaves was verified by RT-PCR. ELISA experiments demonstrated that the highest level of recombinant t-PA expression was $75.1{\mu}g$/ total soluble protein (mg) in alfalfa plants. The amount of recombinant t-PA and its derivative proteins in transgenic plants was estimated to range from 9.7 to $39.5{\mu}g$/ total soluble proteins (mg). Western blot analysis of the transformed alfalfa leaves revealed bands of approximately 68-kDa recombinant t-PA and its derivative proteins. The fibrinolysis of recombinant t-PA and its derivative proteins was confirmed by a fibrin plate assay (range from 3.2 to 8.1 cm). The results presented provide information for the development of an additional production of recombinant human proteins having pharmaceutical applications using transgenic plants.

• Clinical and Experimental Pediatrics
• /
• v.53 no.4
• /
• pp.592-597
• /
• 2010

Hyperimmunoglobulin E syndrome (HIES) is a rare immunodeficiency disease which is characterized by high serum IgE levels, eczema, and recurrent infections. Herein we present the case of a patient with HIES associated with STAT3 gene ($stat3$) mutation. A 16 year-old girl was admitted to our hospital due to hemoptysis caused by pneumonia with bronchiectasis. She had a history of recurrent skin and respiratory tract infections, such as pneumonia caused by MRSA (methicillin-resistant $Staphylococcus$ $aureus$) and $Pseudomonas$ $aeruginosa$. On physical examination, a broad round shaped nose, oral thrush, and chronic eczematous skin rash over her whole body were found. Laboratory data showed an elevated eosinophil count ($750/{\mu}L$) and total IgE level (5,001 U/mL). The patient's National Institutes of Health (NIH) score for HIES was 44. Direct sequencing of the STAT3 gene revealed that the patient was heterozygous for a missense mutation in the DNA binding domain of the STAT3 protein (c.1144C>T, p. Arg382Trp). HIES should be suspected in patients with recurrent infections and can be confirmed by clinical scoring and genetic analysis.