• Geosciences Journal
• /
• v.22 no.6
• /
• pp.1015-1026
• /
• 2018

This paper aims to investigate the good reservoir quality and hydrocarbon potentiality of the Khatatba Formation, Qasr Field in the Shoushan Basin of the North Western Desert, Egypt by combining results from log-based petrophysical analysis, petrographic description and images from scanning electron microscope (SEM). Promising reservoir units are initially identified and evaluated through well log analysis of three wells in the field of study. Petrophysical results are then compared with petrographic and SEM images from rock samples to identify features that characterize the reservoir quality. Well log results show that Khatatba Formation in the study area has good sandstone reservoir intervals from depths ranging from 12848 ft to 13900 ft, with good effective porosity records of 13-15% and hydrocarbon saturations of greater than 83%. Petrographic analysis of these sandstone reservoir units indicate high concentrations of vacant pore spaces with good permeability that can be easily occupied by hydrocarbon. The availability of these pore spaces are attributed to pore-enhancing diagenetic features, mainly in the form of good primary porosity and dissolution. SEM images and EDX analysis confirmed the presence of hydrocarbon, therefore indicating a good hydrocarbon-storing potential for the Khatatba Formation sandstones.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.55-67
• /
• 2012

For the development of gas hydrate as new future energy resources, the drilling was carried out at the five locations where have high potential as gas hydrate bearing sediments in Ulleung basin, offshore Korea in 2007. Well log data were obtained from all wells and core data were procured from 3 wells, UBGH1-04, UBGH1-09 and UBGH1-10. In this study, user-friendly software, "KMU GH Logs 2010", is developed and this software is based on the estimation methods developed in previous study for gas hydrate bearing sediments and the properties estimated from UBGH1-04, UBGH1-09 and UBGH1-10. Petrophysical properties in un-cored wells, UBGH1-01 and UBGH1-14, are also estimated by using well log data. Porosity is estimated by density log and gas hydrate saturation is calculated by sonic log and resistivity log. Sedimentary facies are estimated by applying the linear discriminant analysis using both well log and sedimentary facies data from core analysis. It is confirmed that DITM facies and MSS facies appeared signs of gas hydrate disassociation are able to be distinguished by the method.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.1-14
• /
• 2004

World state of the arts of the conservation of stone monuments is reviewed and the modern conservation program based on conservation science is proposed for the scientific conservation of stone monuments in Korea. The conservation program suggests that the site environment diagnosis, decay diagnosis, petrophysical property analysis, and conservation experiment should always be carefully studied before conservation treatment. It is an up-to-date widely accepted concept in the world of stone conservation science. Our urgent national tasks that should be accomplished for the scientific conservation of stone monuments in Korea are proposed in the following: 1) The stone monument conservation projects should be planned in accordance with 'Conservation Concept of Stone Cultural Properties' and executed in accordance with the proposed 'Conservation Program for Stone Cultural Property' based on conservation science. 2) It is proposed that 'National Institute of Conservation Science for Cultural Properties' be established for systematic conservation research on the tangible cultural properties. 3) The conservation projects of stone monuments should be executed under the control of stone conservation specialist for their quality control. 4) Special national budget should be prepared for quick development of researches on conservation science in Korea.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.156-168
• /
• 2013

Drilling expedition #1 in 2007 and drilling expedition #2 in 2010 were performed for gas hydrate resources evaluation and optimal site selection of pilot test in Ulleung basin, East Sea, Korea. This study presents to build the 3D spatial distribution models using the estimated sedimentary facies, porosity, and gas hydrate saturation derived by well logs and core analysis data from UBGH1-4, UBGH1-9, UBGH1-10, UBGH1-14, UBGH2-2-1, UBGH2-2-2, UBGH2-6, UBGH2-9, UBGH2-10 and UBGH2-11. The objective of 3D spatial distribution modeling is to build a geological representation of the gas hydrate-bearing sediment that honors the heterogeneity in 3D grid scale. The facies modeling is populating sedimentary facies into a geological grid using sequential indicator simulation. The porosity and gas hydrate saturation modeling used sequential Gaussian simulation to populate properties stochastically into grid cells.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.163-170
• /
• 2013

The amplitude variation with offset of seismic data can detect fluids in the sediment and resolve the petrophysical properties of hydrocarbons in the subsurface. We analyzed and described the amplitude variation in deep sea seismic data obtained from the Ulleung Basin, East Sea. By inspecting seismic CDP-offset and CDP-angle gathers which show a bright reflection event, we decided a target zone for amplitude variation analysis. From the seismic angle gather at the middle of Ulleung Basin, we recognized amplitude increase or decrease versus offset on the intercept-gradient curve. Using the product attribute and Poisson's ratio change attribute computed in terms of intercept with gradient, the top and the base of gas saturated sediments were described. The area of amplitude variation suggestive of the presence of gas saturated sediments is shown at the depth of 3 s traveltime. Anomalous features of seismic amplitude in the Ulleung Basin were classified by the crossplot of intercept and gradient. The background trend of crossplot between intercept and gradient shows an inverse proportional relation that is common for wet sediments. Anomalous amplitudes of Class III fall into the first and the third quadrants on crossplots. We inferred regional gas/water saturated area with the horizontal dimension of 150 m in the Ulleung Basin by cross-section with respect to cross-plot anomaly.

• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.207-215
• /
• 2017

To develope shale play which is one of unconventional energy resources, horizontal drilling and hydraulic fracturing are necessary and those are applied to the place where the differential horizontal stress ratio (DHSR) is low. The differential horizontal stress ratio is generally calculated by the minimum and maximum horizontal stress, but it is also calculated from dynamic elastic constants and anisotropic parameters. In this study we analyzed anisotropic properties through the core samples from Danyang limestone and calculated DHSR. The three types of core samples shaped in three directions (vertical, parallel and 45 degree to bedding) were used for laboratory test. We measured P-, S-wave velocities, and density and then calculated dynamic elastic constants, compliance and DHSR. According to the results of the core sample analysis the calculated DHSR is 0.185. Thomsen parameters of the Danyang limestone used in this study are characterized by the P- and S-wave velocities varying along the bedding symmetry axis. It is observed that the DHSR value is more affected by the change in compliance value than the Poisson's ratio. It is necessary to measure SH-wave velocity for more correct petrophysical properties.