• 한국재료학회지
• /
• 제11권12호
• /
• pp.1042-1046
• /
• 2001

Co-22%Cr alloy films are promising for high-density perpendicular magnetic recording media with their perpendicular anisotropy and large coercivity of 3000 Oe. We observed that a self organized nano structure(SONS) of fine ferromagnetic Co-enriched phase and paramagnetic Cr-enriched phase appears inside the grain of Co-Cr magnetic alloy thin films at the elevated substrate temperature after do-sputtering. We prepared 1000 $\AA$-thick Co-22%Cr films on 2000 $\AA$- SiO$_2$/Si(100) substrates at the deposition rate of 100 $\AA$/min with substrate temperatures of 3$0^{\circ}C$, 10$0^{\circ}C$, 15$0^{\circ}C$, 20$0^{\circ}C$, 30$0^{\circ}C$, and 40$0^{\circ}C$, respectively. We employed a vibrating sample magnetometer(VSM) to measure the B-H loops showing the saturation magnetifation, coercivity, remanence in in- plane and out- of- plane modes. In- plane coercivity, perpendicular coercivity, and perpendicular remanence increased as substrate temperature increased, how-ever they decreased after 30$0^{\circ}C$ slowly. Transmission electron microscope (TEM) characterization revealed that the self organized nano structure (SONS) appears at the elevated substrate temperature, which forms fine Co-enriched phases inside a grain, then it eventually affect the perpendicular magnetic property. Our results imply that we may tune the perpendicular magnetic properties with SONS obtained at appropriate substrate temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.100-103
• /
• 2001

In order to investigate the magnetic properties of CoCr-based bilayered thin films on kind of underlayer, we introduced amorphous Si layer to Co-Cr(-Ta) magnetic layer as underlayer. With the thickness of CoCr, CoCrTa single layer, crystalline orientation and perpendicular coercivity was improved. It was revealed that by introducing the Si underlayer, the c-axis orientation of CoCr, CoCrTa magnetic layer was improved largely. However, with increasing Si film thickness, perpendicular coercivity and saturation magnetization of Cocr/si, CoCrTa/Si bilayered thin films was decreased. Grain size of bilayered thin films became larger.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.235-241
• /
• 1996

수직자기 기록매체를 위해 스퍼터링법으로 Co/Pd 및 Co/Pt 다층막을 형성하였으며 Pd 및 Pt 바닥층의 증착 압력이 다층막의 자화거동 및 보자력에 미치는 영향에 대해 연구하였다. Co/Pd 다층막의 경우 보자력이 바닥층의 증착 압력에 매우 민감하여 바닥층 증착압력만을 조절함으로써 보자력을 크게 증가시킬 수 있었으나 Co/Pt 경우 바닥층의 증착압력 조절에 의한 보자력 증대효과는 미미하였다. 바닥층의 종류 및 증착압력에 따른 다층막의 보자력 변화를 바닥층의 표면 거칠기 및 다층막 증착착시의 계면상태 변화의 측면에서 설명할 수 있었으며 이는 바닥층의 증착압력의 증가에 따른 다층막의 수직이방성 에너지 감소 및 자화반전 기구의 변화와도 연관시킬 수 있었다. 다층막의 Kerr 회전각은 바닥층의 종류 및 증착압력에는 거의 의존하지 않는 것으로 나타났다.

• 정보저장시스템학회논문집
• /
• 제3권3호
• /
• pp.149-153
• /
• 2007

Perpendicular patterned magnetic media have been regarded as a prime candidate to achieve an ultra-high magnetic recording density of over 1 Tera-bits/$inch^2$. Patterned magnetic media with nanoscale patterns have been fabricated using various nanopatterning technologies. We focused on the two technical issues of nanoinjection molding technology. Firstly, we have investigated a cost-effective method to fabricate metallic stamps. Secondly, we focused on the analysis of nanoinjection molding with passive heating, where the replication of 50 nm nanopillar arrays was successful. The effect of the thermal insulation layer on the replication quality was examined by analytical and experimental methods. Finally, we deposited a magnetic layer on a injection molded nanopillars and measured. Our methodology can provide cost-effective mass-production for patterned magnetic media.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.70-71
• /
• 2010

In this study, We fabricated FePt-based perpendicular patterned media using a selective combination of E-beam lithography and either Ar plasma etching (deposition-first process) or FePt lift-off (deposition-last process). We employed the deposition-last process to avoid chemical and structural disordering by impinging Ar ions (deposition-first process). For a patterned medium with 100 nm patterns made by this process, the out-of-plane coercivity was measured to be 5 fold larger than its in-plane value. The deposition-last process may be a promising way to achieve ultra-high density patterned media.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.122-122
• /
• 2003

• E2M - 전기 전자와 첨단 소재
• /
• 제16권1호
• /
• pp.59.2-59
• /
• 2003

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.180-181
• /
• 2002

수직기록매체에서 기록 밀도가 증가하기 위해서는 bit의 크기를 줄여야 하고, 이를 위해서는 writing head의 width와 thickness를 줄여야 한다. 그러나 head의 크기가 줄어들면 기록층의 자화를 반전시키기에 충분한 write field를 얻지 못한다. 이를 극복하기 위해 head의 tip부분을 trimming을 하여 작은 pole tip 크기를 가지면서도 큰 write field를 얻고, 여분의 magnetic field를 얻기 위해 soft underlayer를 도입하는 이중층 수직기록 매체가 제안되고 있다. (중략)

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.350-351
• /
• 2000

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.141-141
• /
• 2005