• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.4
• /
• pp.21-31
• /
• 2024

Sumgol in Jeju Island plays a significant role in groundwater recharge due to its permeable hydrogeological characteristics. However, a quantitative assessment of the interrelationship between rainfall characteristics and rainwater inflows into Sumgols has not yet been conducted. Therefore, this study examined the characteristics of rainwater inflow into three Sumgols located in the eastern and western regions of Jeju Island and assessed hydrogeologic factors influencing these inflows. During two rainfall events, the studied locations in Sumgol exhibited different characteristics of rainwater inflows, despite experiencing similar rainfall events. Additionally, the delay time for rainwater to reach the Sumgol locations after the rainfall was influenced more by rainfall intensity than by cumulative amount of rainfall. In Sumgols located in non-volcanic ash soil with low hydraulic conductivity, such as those in agricultural areas, rainwater inflows were observed even with small rainfall and low rainfall intensity. This study suggests that rainfall intensity, soil characteristics, permeability of lava flows, and land use are key factors influencing rainwater inflow into Sumgols, revealing that soil characteristics and the permeability of lava flows have a greater impact on surface runoff than land use.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.282-286
• /
• 2007

An experiment was conducted to compare the 1% safranine solution flow depth in radial and longitudinal direction of Prunus sargentii. Longitudinal flow of safranine solution was found higher than radial flow. Body ray parenchyma was found more permeable than marginal ray parenchyma and it was about 1.3 times higher. Intercellular space conducted safranine solution more than ray parenchyma. Vessel was found to be the main avenue for liquid conduction in longitudinal direction. Different anatomical features of ray, vessel and fiber affected the penetration depth of safranine solution. Moreover initial penetration depth was found to be high and thereafter decreased gradually.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.307-311
• /
• 2007

An experiment was conducted to know the essential oil penetration depth in radial and longitudinal direction of Prunus sargentii. Oil penetration depth was found greater than radial flow depth. Vessel conducted oil more than wood fiber. In radial direction, body ray parenchyma was found more permeable than marginal ray parenchyma and it was about 138% times higher. Furthermore penetration depth of oil in intercellular space was greater than ray parenchyma and it was about 250% higher than ray parenchymas. Initial flow speed was found high and then it gradually decreased.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.18-21
• /
• 2000

A nonconstact technique for reducing the core loss of a grain oriented silicon steel has been developed by the use of mechanical scribing Q-switched laser plasma jet or electron beam irradiation. Among these methods electron beam irradiation has advantages of domain refining without any deformation or damage of insulating film on the surface of a grain criented Si-Fe. Over the past years this processing was performed in vaccum of 10-4 Torr or below causing the problem of high cost and difficulty of continuous works. In this paper a miniature electron permeable window through which electron beam energy 4-80keV and average current 0.1-2mA. were obtained for electron beam irradiating on air was designed and manufactured.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.244-248
• /
• 2003

Unused well and improperly abandoned wells are a significant threat to groundwater quality. If abandoned wells is not properly filled with material, it can directly channel to flow contaminated and surface water into subsurface and groundwater. The abandonment process is over viewed and the method of filling with impermeable and permeable material is presented for the purpose of proper well abandonment work.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.192-195
• /
• 2008

Conventional gas deposits consist of pressurized gas held in porous and permeable reservoir rocks and its recovery takes place where the natural pressure of the gas reservoir forces gas to the surface. But gas hydrate is a crystalline solid, its prospects require reservoir rock properties approprate porosity, permeability with mapping of temperature and pressure conditions to define the hydrate stability zone. In this study, we have carried out to investigate the dissociation characteristics of methane hydrates and the productivities of dissociated gas and water with depressurization scheme. Also, it has been conducted the flowing behavior of the dissociated gas and water in porous rock and the efficiency of the production.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.115-118
• /
• 2001

The water vapour permeability of clothing materials is a critical property for clothing systems that must maintain thermal equilibrium for the wearer. The evaporation of perspiration provides the means of cooling the human body. The perspiration should evaporate from the surface of the skin and pass as water vapour through the clothing, which must be permeable for comfort. The primary objectives in this study of the transfer through fabrics of water vapour are to measure this property in a quantitative manner appropriate to clothing systems and to provide an increased understanding of various types of fabric in water vapour transfer. (omitted)

• Structural Engineering and Mechanics
• /
• v.23 no.2
• /
• pp.163-175
• /
• 2006

In this paper, the dynamic response of a piezoelectric layer with a penny-shaped crack is investigated. The piezoelectric layer is subjected to an axisymmetrical action of both mechanical and electrical impacts. Two kinds of crack surface conditions, i.e., electrically impermeable and electrically permeable, are adopted. Based upon integral transform technique, the crack boundary value problem is reduced to a system of Fredholm integral equations in the Laplace transform domain. By making use of numerical Laplace inversion the time-dependent dynamic stress and electric displacement intensity factors are obtained, and the dynamic energy release rate is further derived. Numerical results are plotted to show the effects of both the piezoelectric layer thickness and the electrical impact loadings on the dynamic fracture behaviors of the crack tips.

• Water for future
• /
• v.6 no.2
• /
• pp.19-29
• /
• 1973

The progressive contamination of water resulted from man's activity and the use of fertilizers is not restricted only to surface water, but also the shallow groundwater is affected. This type of groundwater contamination is mainly restricted to areas composed of permeable, nonconsolidated sediments forming a shallow aquifer. The chloride and the sulfate resulted from man's activity and the use of fertilizers were measured to study the variations of the groundwater contamination. In general, (1) When water level rises, the rate of groundwater contamination becomes less and when water level declines, the rate of contamination is increased. (2) The highly contaminated season is the early-summer and the less contaminated season is the winter or after rainy season. (3) The groundwater in weathering zone without covering layer. (4) The degree of contamination of wells is increased with the increase of well depth and lowing the water table, because of increasing contaminated water from enlargement of the area of influence of the well.