• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.448-449
• /
• 2007

The PMMA plates with periodic ~200 nm nanosized patterned array were fabricated through the nanoimprint technique with their proper Ni stamper. The computer coding was also made with the Mathematica language software via RCWA (Rigorous Continuous Wave Analysis) and it is confirmed that simulation results are in good agreement with the experimental ones.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1736-1746
• /
• 2021

The results of full-scale numerical experiments of a hybrid thorium-containing fuel cell facility operating in a close-to-critical state due to a controlled source of fusion neutrons are discussed in this work. The facility under study was a complex consisting of two blocks. The first block was based on the concept of a high-temperature gas-cooled thorium reactor core. The second block was an axially symmetrical extended plasma generator of additional neutrons that was placed in the near-axial zone of the facility blanket. The calculated models of the blanket and the plasma generator of D-T neutrons created within the work allowed for research of the neutronic parameters of the facility in stationary and pulse-periodic operation modes. This research will make it possible to construct a safe facility and investigate the properties of thorium fuel, which can be continuously used in the epithermal spectrum of the considered hybrid fusion-fission reactor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.761-768
• /
• 2017

In this paper, to implement the electromagnetic wave environment and solve electromagnetic compatibility(EMC) problem, miniaturization of ultra-wide band log periodic dipole antenna for measurement was investigated. In addition, in oder to improve the signal-to-noise ratio in high frequency band, balun was connected to the antenna to stabilize the operation of the differential mode antenna and the single mode coaxial cable. To minimize the total size and to increase bandwidth of the antenna, a fat dipole structure was used for the resonance frequency band below 4 GHz and a general dipole shape was used for that above 4 GHz. The bandwidth of the proposed antenna was represented from 0.6 GHz to 8.0 GHz with a ratio bandwidth of 12.3 : 1. Measured peak gain varies from 5.7 dBi to 9.1 dBi, and a half power beamwidth was presented from $29.4^{\circ}$ to $100.2^{\circ}$ in operating range.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.344-349
• /
• 2022

A compact LPDA antenna consisting of right triangle-shaped dipole elements appended with strips is proposed for UWB applications. First, right triangle-shaped dipole elements are used instead of conventional strip dipole elements to reduce the width of the LPDA antenna. Second, the spacing between the LPDA elements is decreased to reduce the length of the LPDA antenna. Finally, strips are appended at the ends of the right triangle-shaped dipole elements in order to further reduce the width of the antenna. A prototype of the proposed antenna with 16 elements and gain > 4 dBi is fabricated on an FR4 substrate with dimensions of 44 mm×30 mm. Measured frequency band of the fabricated antenna is 2.99-14.76 GHz for a VSWR < 2, which ensures UWB operation, and measured gain range is 4.0-5.5 dBi with a front-to-back ratio larger than 10 dB. The length and width of the proposed compact LPDA antenna are reduced by 40.9% and 20.6%, respectively, compared to the conventional LPDA.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.63-69
• /
• 2014

For the safety messages in IEEE 802.11p vehicles network environment(WAVE), strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. WAVE standards apply multiple radios and multiple channels to provide open public road safety services and improve the comfort and efficiency of driving. Although WAVE standards have been proposed multi-channel multi-radio, the standards neither consider the WAVE multi-radio environment nor its effect on the beacon broadcasting. Most of beacon broadcasting is designed to be delivered on only one physical device and one control channel by the WAVE standard. also conflict-free channel assignment of the fewest channels to a given set of radio nodes without causing collision is NP-hard, even with the knowledge of the network topology and all nodes have the same transmission radio. Based on the latest standard IEEE 802.11p and IEEE 1609.4, this paper proposes an interference aware-based channel assignment algorithm with Nash bargaining solution that minimizes interference and increases throughput with wireless mesh network, which is deigned for multi-radio multi-cahnnel structure of WAVE. The proposed algorithm is validated against numerical simulation results and results show that our proposed algorithm is improvements on 8 channels with 3 radios compared to Tabu and random channel allocation algorithm.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.241-247
• /
• 2023

We examine the spectral characteristics of laser-induced periodic surface structures (LIPSSs) formed on an amorphous silicon film irradiated by a 355-nm nanosecond laser. A Gaussian beam with a diameter of 196 ㎛ is used to perform a two-dimensional raster scan. The laser's pulse number is varied from 190 to 280, and its intensity is adjusted within 100-130 mJ/cm². LIPSSs with a periodicity of approximately 330 nm form on the surface of the Si film, aligned perpendicular to the laser's polarization. Transmission spectra of the samples show dips around 700 nm for transverse electric polarization and around 500 nm for transverse magnetic polarization. The features are investigated with a one-dimensional-grating model using a rigorous coupled-wave analysis. Simulations confirm that the observed dips are due to the resonant modes, depending on the polarization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.428-435
• /
• 2004

With the rapid and wide-spread use of cellular telephones much attention has been focussed on propagation in the urban area crowed with buildings and houses. It is often surrounded by hills, forests, and mountains. The importance of surface scattering intereference between transmitters and receivers on the rough surfaces has been interested and investigated. Therefore, a prediction method is necessary to estimate the influence of rough surfaces on microwave radio propagation. Moreover, most of the mobile communications are performed based on the digital communication system rather than the analog one. In this case, we must pay more careful attention to the signal delay caused by the phase delay due to the multi-path propagation. In this paper we have analyzed numerically scattering of electromagnetic waves from building walls by using FVTD(Finite Volume Time Domain) method. We consider three different types of rough surfaces such as periodic, random, and composite structures. We calculate the bistatic normalized radar cross section (NRCS) for horizontal and vertical polarization, and we take account of the conventional optical reflection which corresponds to the n-th Bragg reflection for periodic structures. In addition, we investigated what conditions are needed in order to be able to ignore the higher order Bragg reflection for the periodic structures.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.80-85
• /
• 2002

Purpose: This study is to assess the involvement of vessels in lower extremity in diabetics, using color doppler ultrasonogram. Materials and Methods: Arteries of both lower extremities were divided into 3 groups-large vessel (above-knee arteries), popliteal vessel, and small vessel(below-knee arteries) -, and evaluated using color doppler ultrasonogram in 60 diabetics. In color doppler ultrasonogram, the wave forms of all vessels were divided into 5 grades; grade I was triphasic wave form, grade II was spectral broadening form, grade III was monophasic wave form, grade IV was pulsus tardus et parvus form, grade V was absence of wave. Grade III, IV, V were grouped into vessel obstruction. We reviewed the correlationships among the degree of the peripheral vascular involvement, duration of dibetes, existence of bilaterality, types of dibetes. Results: Bilateral involvement was high in both lower extremity. Luminal stenosis, vascular calcification and vessel obstruction were high incidence in the patients over ten years of diabetic duration. Prevalence of vascular calcification and vessel obstruction were high in the small vessel of ankle level. But, insulin injection was not related to the incidence of vascular abnormality. Conclusion: Color doppler ultrasonogram seems to be useful for evaluation of peripheral vascular status, decision making for necessity of additional test, periodic follow -up tool in diabetes patients.

• 한국해양학회지
• /
• v.14 no.2
• /
• pp.71-77
• /
• 1979

Tidal waves and the fluctuation of current are studied by use of observed data on tidal level, flow velocity and river discharge in the estuarine region of the Nakdong River. Observed data on the tidal level at five stations are used to obtain the fluctuation of amplitude and phase of tides, and the change of the wave speed versus distance from the river mouth. Comnining these tidal data with the vertical distribution of horizontal velocity data, some characteristics of the periodic tidal flow are deduced: (1)Diminishing rates of the tidal amplitude ratio η / η$\_$0/ at high tide were 0.058η$\_$0H/ /Km at neap tides. The constant of phase change, K, was 0.035rad/km. (2)While proceeding landward, the shape of the tidal wave changes from symmetrical to asymmetrical. The traveling speed of the tidal wave crest was estimated to be 3.6∼5.2m/sec, while that of the tidal wave trough was 2.4∼ 3.5m/sec. (3)The flowing speed of the water varies periodically in accordance with the tidal period. The maximum speed of landward flow appeared approximately at two hours before the high tide, while that of seaward flow at two hours before the low tide. (4)The upstream boundary is deduced approximately to be 50km at spring tide and 44km at neap tide from the tidal velocity decreasing. the tidal influence area is estimated approximately to be 65km from the tidal amplitude damping.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.19-25
• /
• 2005

Empirical experiments have been undertaken to investigate the effects of Intake Pulsating Flow on volumetric efficiency in a diesel engine. Waves occurs in the manifolds of engine owing to the periodic nature of the induction and exhaust processes caused by piston motion. During induction process, as waves travel both directions, they are reflected and interacted each other and pressure waves are transmitted through it. Hence, the flow become more complex and unsteady flow. These pressure waves act upon intake pulsating flow and affects on volumetric efficiency. In this paper the effects of change in length of induction pipes and wide range of engine speed on volumetric efficiency was examined and evaluated. It was found that volumetric efficiency was affected by intake pulsating flow with engine speed and the pipe length. The results obtained were considered by adopting a theory of wave action.