• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.384-392
• /
• 2006

Reported are the heat transfer characteristics of a two-phase loop thermosyphon (TLT) with nanofluids consisted of nano-size silver particles and distilled water as the working fluid. The nanofluids used in the present study are dispersed solutions with various amount of silver nanoparticle in distilled water. It is seen from the present study that the heat transfer performance of the test TLT with nanofluids increased as much as about 2 times higher than that of a TLT with pure water as the working fluid based on same heat flux. The study also showed that there was no deterioration of the TLT performance with time, up to a period of 8 days of continuous operation which implies that there was no coagulation of nanoparticles within the working nanofluid during the operation of the test TLT.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.611-614
• /
• 1991

In variable speed driving system of three phase induction motor controlled by an inverter, because of the switching of semiconductor devices in inverter, an appreciable amount of harmonic components of voltage waveform can cause the motor to generate losses, torque ripple, acoustic noise and oscillation of semiconductor devices. In this paper a new PAM type PWM inverter using IGBT is described. The output waveforms in the proposed PAM type PWM inverter are investigated both theoretiically and experimentally. The line-voltage waveform is composed of fundamental component and the sidebands of carrier frequency. The lower order harmonics are not included in the output wave form. As each inverter arm does not operate during two-thirds period, the heats, generated in the devices are reduced. That is, the size of the inverter system can he minimized because of the reduction in the heat dissipating equipment.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.1
• /
• pp.59-63
• /
• 2011

This study was carried out to investigate the change of components which raw milk has during cold storage. General component content of raw milk (fat, protein, lactose, total solids) was decreased in proportion to the length of cold storage. The pH of raw milk was decreased in according to the length of cold storage. In electrophoresis images, ${\beta}$-casein which was one of the composition of raw milk was decreased as the period of cold storage extended on the other hand, the content of Ca and P in the serum casein was increased in accordance with the length of cold storage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1212-1217
• /
• 2006

This study is concerned with static and sinusoidal disturbance rejection for a single periodic input disturbance with known period. In the area of active elimination of a disturbance force, the control input should have two different kinds of gains: one is to deliver a stable control and the other is a force component to cancel the external disturbance force. In this paper we employ a simple state feedback control law to make the balance beam stable and employ a linear observer to estimate the states which represent the external disturbance force components. Simulation results verify our proposed control method to reject a static and sinusoidal disturbance force.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• Journal of The Korean Society of Clinical Toxicology
• /
• v.3 no.2
• /
• pp.103-106
• /
• 2005

BASTA is an herbicide which contains glufosinate ammonium as a main component with an anionic surfactant, polyoxyethylene alkylether sulfate, and nonselectively inhibits glutamine synthetase. It became a wildly used herbicide in Korea and its intoxication is now increasing. A 42-year old woman ingested about 300ml of BASTA in a suicide attempt. She showed unconsciousness and respiratory distress in the beginning, and later developed multiple generalized convulsions, low blood pressure, fever and diabetes insipidus. Although she became alert 12 days after the ingestion, she showed retrograde amnesia for a period of about recent 10 years. A neuropsychological test on day 22 revealed frontal lobe dysfunction, visual memory disturbance and slight decrease in visuospatial function. All these neurological abnormalities that might occur due to glufosinate ammonium were almost improved in the follow-up test performed a month later.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.613-617
• /
• 2011

This study was conducted to compare the quality of the brown rice (BR) and milled rice (MR) during storage. To assess quality, BR and MR were analysed by their fat acidity and flavor pattern using a SMart Nose$^{(R)}$. BR was stored for 30 days at $30^{\circ}C$, and analysed after 5, 15, 20, and 30 days of storage. MR produced in 2005, 2009, and 2010 were also tested. The fat acidity of both rice groups was increased with extended storage and the fat acidity of BR was more rapidly increased than that of MR in general. The flavor patterns from the SMart Nose$^{(R)}$ results were analyzed by the principal component analysis (PCA). The major groups of atomic mass unit (amu) for good discrimination contribution were from 41 to 85 amus. The PCA1 and PCA2 of BR were 95.64% and 2.78%, respectively when the samples were categorized by storage period. The PCA1 and PCA2 of MR were 81.18% and 13.85%, respectively when the samples were compared by production year. Both rice groups could be practically differentiated into flavor patterns by volatile properties for storage period. With regard to the correlation between fat acidity and flavor pattern, we could find that increasing storage period increased fat acidity value and changed flavor pattern from SMart Nose$^{(R)}$. Accordingly, SMart Nose$^{(R)}$ could be successfully used for easy screening and quality evaluation of stored rice.

• Anxiety and mood
• /
• v.12 no.2
• /
• pp.69-78
• /
• 2016

Objective : Disaster causes psychological distress to a large number of people in a short period of time, by both direct and indirect exposure to traumatic events embedded in various realms of disaster experience. Optimal, well-planned treatment interventions should follow from the early acute period to recovery phase, extending up to several months later. In this context, there is an increasing need for systemic review to gain comprehensive insights for disaster interventions. These need to be added to public policy, and for the prevention and treatment of disaster-related psychopathology. Here, we review the published studies on psychological interventions for disaster-related posttraumatic stress disorder. Methods : Specific psychological interventions regarded as effective treatments for have been selected for this review, such as CBT (Cognitive-Behavior Therapy), Exposure Therapy, EMDR (Eye Movement Desensitization & Reprocessing), SIT (Stress Inoculation Therapy) and Psychoeducation. In addition, natural disasters, industrial disasters, and accidents involving aircraft and ships were also categorized as disasters, along with war and combat trauma. Results : Cognitive behavior therapy and exposure therapy had the strongest research support for effectiveness, and could be considered as the first-choice treatment for disaster-related PTSD. The second line of treatment is EMDR, although this treatment modality has the advantage of reaching certain treatment improvements in fewer sessions. However, the effects of SIT and psychoeducation to the survivors of disasters, remains unclear at this point. Additionally, we propose the possibilities of using virtual reality component and imagery rescripting as modified forms of traditional cognitive behavior therapy and exposure therapy. Conclusion : Cognitive behavior therapy and exposure therapy, deemed effective treatments for various trauma, are considered to be effective for survivors from disasters. However, the efficacy of other interventions has not yet been examined methodologically in well-designed studies, such as randomized controlled trials. In particular, future empirical studies are needed, since it is difficult to conclude that psychological interventions have similar effects on different types of disasters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5149-5167
• /
• 2017

Reducing energy consumption in a wireless video sensor network (WVSN) is a crucial problem because of the high video data volume and severe energy constraints of battery-powered WVSN nodes. In this paper, we present an adaptive dynamic resizing approach for a SRAM communication buffer in a WVSN node in order to reduce the energy consumption and thereby, to maximize the lifetime of the WVSN nodes. To reduce the power consumption of the communication part, which is typically the most energy-consuming component in the WVSN nodes, the radio needs to remain turned off during the data buffer-filling period as well as idle period. As the radio ON/OFF transition incurs extra energy consumption, we need to reduce the ON/OFF transition frequency, which requires a large-sized buffer. However, a large-sized SRAM buffer results in more energy consumption because SRAM power consumption is proportional to the memory size. We can dynamically adjust any active buffer memory size by utilizing a power-gating technique to reflect the optimal control on the buffer size. This paper aims at finding the optimal buffer size, based on the trade-off between the respective energy consumption ratios of the communication buffer and the radio part, respectively. We derive a formula showing the relationship between control variables, including active buffer size and total energy consumption, to mathematically determine the optimal buffer size for any given conditions to minimize total energy consumption. Simulation results show that the overall energy reduction, using our approach, is up to 40.48% (26.96% on average) compared to the conventional wireless communication scheme. In addition, the lifetime of the WVSN node has been extended by 22.17% on average, compared to the existing approaches.