• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.279-287
• /
• 2018

Flight tests for aircraft development and certification have higher air accidents risk than other aerospace industries. Accordingly risk identification necessary for risk management in the safety management system is a very important factor in preventing similar air accidents during flight tests. But internationally issued accident statistics are usually confined to commercial transport aircraft and they do not reflect characteristics of flight tests, also databases to hazards identification during flight tests are not established or available in Republic of Korea. Therefore, we identified flight test procedures and traced the major causes of aviation accidents based on the statistics and preventive materials for risk management which were issued by international organizations and advanced countries of aviation. A total of 312 final reports classified as flight test among air accident/incident database held by U.S. NTSB were researched and about 200 flight test hazard were identified. The results of this study will be used as basic data for establishing the safety management system of the national comprehensive flight performance test site.

• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.205-210
• /
• 2010

LED light has various advantages such as an energy saving effect of over 80% compared to existing lighting and environmentally friendly characteristics; however, there has been no affordable market for LED lighting because of its expensive price. This study discussed the validity of the expansion of distribution of LED lighting through an assessment of economic efficiency concerning LED lightening in order to analyze its efficiency in terms of energy savings and maintenance and repair, which will be generated as a result of the change from existing incandescent bulbs to LED lighting in the public sector. As to the target of analysis, the paper reviewed the validity of change to LED lighting as a result of the elimination of existing incandescent bulbs, by referring to 'the current incandescent bulb use and elimination performance' published by the Ministry of Knowledge Economy based on the "Elimination management system" executed by Korea Energy Management Corporation. The paper considered expenses for change, annual power savings amount and electric charges savings amount, repair and maintenance cost, $CO_2$ reduction volume, and the profit from the sale of CER (certified emission reduction). As a result of analyzing economic efficiency, when the discount rate during the change of existing incandescent bulb lighting to LED lighting is 3.26%, the profit was 8,648,400,000 won. Accordingly, NPV was analyzed to have a 'positive (+)' value, which means that this change is profitable.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.311-318
• /
• 2018

When reinforced concrete structures are exposed to fire, their mechanical properties such as compressive strength, elasticity coefficient and rebar yield strength, are degraded. Therefore, the structure's damage assessment is essential in determining whether to dismantle or augment the structure after a fire. In this study, the confinement effect of lateral reinforcement of RC column according to the numbers of fire exposure face and stirrup was verified by fire resistant test with the heating temperatures of $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$. The test results showed that the peak stress decreases and peak strain increases as the temperature is getting higher, also transverse ties are helpful in improving the compressive resistance of concrete subjected to high temperature. Based on the results of this study, the residual stress of confined concrete under thermal damage is higher at the condition of more lateral reinforcement ratio and less fire exposure faces. The decreasing ratio of elastic modulus of more confined and less exposure faces from the relationship of load and displacement was also smaller than that of opposite conditions.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.321-328
• /
• 2019

The detection performances of the NaI(Tl), $LaBr_3$(Ce) and $CeBr_3$ scintillation detectors, which can be used to rapidly evaluate the major artificial radionuclides deposited on the soil surface in a nuclear accident or radiological emergency, were compared. Detection performance was assessed by calculating the minimum detectable activity (MDA). The detection efficiency of each detector for artificial radionuclides was semi-empirically determined using mathematical modelling and point-like sources having certified radioactivity. The background gamma-ray energy spectrum for MDA evaluation was obtained from relatively wide and flat grassland, and the MDA values of each detector for the major artificial radionuclides that could be released in nuclear accidents were calculated. As a result, the relative MDA values of each detector regarding surface deposition distribution at normal environmental radiation level were evaluated as high in the order of the NaI(Tl), $LaBr_3$(Ce), and $CeBr_3$ detectors. These results were compared based on each detector's intrinsic and measurement environment background, detection efficiency, and energy resolution for the gamma-ray energy region of the radionuclide of interest.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.174-187
• /
• 2021

Cytotechnologists evaluate and analyze disorders of cells that constitute the human body, and are involved in the primary assessment of diverse diseases, including cancer. However, the employment conditions and workload of cytotechnologists are poorly understood. This study was undertaken to provide basic data for establishing the criteria for quality control certification factors based on the scope of effective task performance of cytotechnologists, and to provide results of their workload analysis according to the type of medical institution. The study was conducted by enrolling certified cytotechnologists working at various nationwide medical institutions. Our analysis revealed that 178 personnel (72.7%) were involved in primary screening of samples. On an average, the daily number of primary screening of samples performed per cytotechnologist (76 respondents) was determined to be 75.4 chapters (16.8 chapters/hours) at the university hospital level, 72.4 chapters (18.6 chapters/hours) at the general hospital level, and 231 chapters (32.6 chapters/hours) at professional trust institutions. Our results indicate the necessity to establish a consultant with the Korean Cell Pathology Association, to enable finding solutions to solve existing issues by establishing accurate standard guidelines for assessing cell screening.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.580-586
• /
• 2020

Fishery resources have been widely consumed as protein- and vitamin-rich food sources in the Korean diet. However, information regarding their vitamin levels is extremely limited. In this study, trienzyme-Lactobacillus casei method was validated and used to determine the folate contents in fishery foods. The trienzyme-L. casei method for folate analysis showed excellent accuracy (85.2 to 95.3% recovery) and precision (repeatability 1.4% RSD and reproducibility 2.4% RSD). Folate contents of 20 fish foods (4 fish, 3 crustaceans, 3 sea algae, 3 cephalopods, 4 shellfish, and 3 others) ranged from 1.75 to 97.98 ㎍/100 g. Furthermore, we found that the folate content in seaweed fusiforme was the highest, followed by gulfweed (69.73 ㎍/100 g). Folate analysis using the trienzyme-L. casei method was determined excellent based on the z-score of -0.3 in the Food Analysis Performance Assessment Scheme test. Analytical and method validation data generated in this study could be used to update the national food composition table on vitamin B9 in Korean fishery resources.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.3
• /
• pp.23-41
• /
• 2021

Objective : The purpose of this study was to analyze the effects of simultaneous dual-task training to assess executive function in older adults. Methods : We searched the PubMed, EMBASE, Cochrane, Web of Science, and RISS databases of publicated studies in the past decade. Seven studies were selected based on the inclusion and exclusion criteria. Qualitative assessment and meta-analysis were performed for the seven studies. Results : A randomized controlled trial design was used in the selected studies, and PEDro Scores above seven were obtained. The Trial Making Test (TMT) evaluated the effects of dual-task training on executive function in four studies. The Color Trail Test (CTT) was used in two studies, and Stroop test was used in three studies. The effect size for total executive function was 0.38, which was small. The effect sizes for TMT and CTT were 0.37. Stroop Test was 0.34, demonstrating that their effect sizes were also small. Only significant effects in total executive function, TMT, and CTT showed significant effects (all p<0.05). Conclusion : This study confirmed that dual-task training was effective in improving executive function in older adults. To improve the effectiveness of dual-task training, the difficulty of the dual-task training should be considered. It is also necessary to implement assessments that can evaluate performance under dual-task conditions as well as conventional test tools for executive function. In the future, dual-task training could be used as an appropriate intervention for executive function in older adults to delay the onset of dementia.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.281-288
• /
• 2021

This study was conducted to analyze and compare the concentrations of heavy metals in 430 different products of 20 types of herbal medicines available in the domestic market in Korea by Graphite Furnace-Atomic Absorption Spectrometry (GF-AAS) and automated mercury analyzer. The accuracy for lead (Pb), arsenic (As), cadmium (Cd), and mercury (Hg) was in the range 92.67-102.56%, and the precision was 0.21-6.00 relative standard deviation (RSD%), which was in compliance with the Codex acceptable range. Furthermore, the Food Analysis Performance Assessment Scheme (FAPAS) quality control (QC) material showed a recovery range of 96.7-102.0% and 0.33-4.93 RSD%. The average contents (㎍/kg) of Pb, As, Cd, and Hg in herbal medicines were 254.9 (not detected (N.D.)-2,515.2), 171.0 (N.D.-2,465.2), 99.2 (N.D.-797.1), and 6.0 (N.D.-83.6), respectively. Based on the quantitative analysis results, the heavy metal contents of 20 types of herbal medicines distributed in Korea are within the acceptable range according to the standards issued by the Ministry of Food and Drug Safety (MFDS). By using the manufacturer of herbal products as the standard for QC, the Pb, As, Cd, and Hg contents were investigated in the packaging process just before distribution to determine the actual conditions of residual heavy metals in herbal medicines. Thus, these result may contribute to monitoring the QC of herbal medicines distributed in Korea and could provide basic data for supplying safe herbal medicines to the public.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.507-522
• /
• 2021

Specific survey objectives often cannot be met using only one geophysical method, as each method's results are influenced by the specific physical properties of subsurface materials. In particular, areas susceptible to geological hazards require investigation using more than one method in order to reduce risks to life and property. Instead of analyzing the results from each method separately, this work develops a four-quadrant criterion for classifying areas of levees as safe or weak. The assessment is based on statistically determined thresholds of seismic velocity (P-wave velocity from seismic refraction and S-wave velocity from multichannel analysis of surface waves) and electrical resistivity. Thresholds are determined by subtracting the standard deviation from the mean during performance testing of this correlation technique applied to model data of four horizontal and inclined fracture zones. Compared with results from the crossplot of resistivity and P-wave velocity, crossplot analysis using resistivity and S-wave velocity data provides more reliable information on the soil type, ground stiffness, and lithological characteristics of the levee system. A loose and sandy zone (represented by low S-wave velocity and high resistivity) falling within the second quadrant is interpreted to be a weak zone. This interpretation is well supported by the N values from standard penetrating test for the central core.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.2
• /
• pp.35-55
• /
• 2022

As altmetrics has received a lot of attention as an muti-dimensional impact assessment tool, it is necessary to verify whether it can supplement the citation-based research performance evaluation system. This study analyzed and compared the effects of each altmetrics sources on citation by sampling 1,600 high-cited papers published in the last 10 years (Sample A) and non-year-limited papers (Sample B) indexed in Scopus. In addition, it was analyzed whether the OA of the paper had a moderating effect on the numbers of cited-by, and the difference according to the samples was verified. As a result of the analysis, only the number of Mendeley bookmark readers was analyzed to have a positive (+) effect on the numbers of cited-by, and OA status had a significant moderating effect in both groups. However, in sample A, OA showed a reinforcing effect on cited-by, whereas Sample B showed a weakening effect, showing a difference. On the other hand, social mention such as media reports do not have a significant effect on the cited-by regardless of OA conditions, but they can be used to understand the social impact of non-academic mass readers.