• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.742-756
• /
• 2008

Recently, it's increasing to use the applied technology related to the quantitative and qualitative growth of industry area. One of them is software to be used in industry area, and software is the most important part in using the industrial equipments. Therefore, the quality of software in the industrial devices determines the performance of the devices. At this time, it's inspired an evaluation and measurement of software quality to have within industrial equipment, and it's forming the research and development in domestic and foreign. In this paper, we constructed evaluation metrics based on ISO/IEC 12119, the International Standard for the general requirements of software and ISO/IEC 9126-2, the International Standard for the evaluation of software qualify characteristics and sub-characteritics, and for this accomplishment, It has been designed and developed industrial software international standard compatible approval system which approve a quality based on quality test result of industrial software using the ISO/IEC 14598-6 that international standard for organization of evaluation module.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.235-242
• /
• 2019

The objective of this study is to modify the mixture proportions of concrete that were developed for section enlargement strengthening elements using a specially designed binder composed of 5% ultra-rapid hardening cement, 10% polymer, and 85% ordinary portland cement in order to assign the self-compaction property to such concrete. The self-compaction abilities of concrete were estimated by the performance criteria specified in JSCE and EFNARC provions. Test results showed that the increase in the unit binder content at the consistent water-to-bider ratio led to increase in viscosity of fresh concrete but did not exhibit the decrease in the fluidity due to a greater viscosity. The mixture proportioning of self-compaction section enlargement concrete could be considered at the following conditions: unit binder contents of $430kg/m^3{\sim}470kg/m^3$ and fine aggregate-to-total aggregate ratios of 40%~46% at the water-to-binder ratio of 38%.

• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.107-114
• /
• 2018

Recently, as aviation industry has been activated, development of software related to composite materials has been demanded. Composite analysis requires specialized structural analysis and test evaluation. Therefore, it is necessary to use existing commercial software to analyze the composite structure, but existing commercial software only provides limited functions. Especially, since there is no specialized software for corner structure analysis of aerospace composites spa structure, much human resources and time are consumed in structural analysis. In order to solve this problem, we developed a GUI-based automation software based on user-friendly GUI that reflects the existing corner structure analysis procedure and provides multiple breakdown criteria. To verify the reliability of the structural analysis results of the developed software, it was confirmed that there is no problem in the structural analysis performance as a result of comparing with the existing analysis results.

• Journal of Korean Traditional Oncology
• /
• v.24 no.1
• /
• pp.19-28
• /
• 2019

Objective : The purpose of this study is to report and observe effects of Integrative Cancer Treatment (ICT) on metastatic breast cancer patient. Method : A left breast cancer patient diagnosed with recurrence on liver and bones April 2018. The patient had received paclitaxel chemotherapy for two months and discontinued it because of tumor progression and side effects. The patient has been treated with ICT since March 2018 and has been taking capecitabine since October 2018. The clinical outcomes were measured by computed tomography, laboratory findings including tumor markers (CEA, CA15-3). The clinical outcomes were measured by computed tomography, laboratory findings including tumor markers (CEA, CA15-3), liver function test (AST, ALT), Eastern Cooperative Oncology Group performance status (ECOG PS), and numeric rating scales (NRS). Results : After the ICT, tumor size was partially decreased accompanying by reducing the levels of tumor markers. Major clinical symptoms induced by paclitaxel chemotherapy were improved. There were no severe adverse events induced by ICT based on National Cancer Institute Common Terminology Criteria for Adverse Events (NCI CTCAE) version 5.0. Conclusion : This case suggests that ICT may have synergistic effect for the treatment of metastatic breast cancer patient in conjunction with capecitabine.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.79-86
• /
• 2019

In order to measure the filtration characteristics of a cotton ball shape filter, the experiments of suspended solids(SS) surrogate material selection and filtration performance have been carried out in this study. Between the two materials of powdered activated carbon(PAC) and powdered red-clay, PAC is more suitable surrogate material in terms of experimental criteria and particle size distribution in the non-point source pollutants removal system. As a result of the filtration experiments with the cotton ball shape filter, the initial headloss was about 8 cm, and the headloss slightly increased over filtration time. The Kozeny-Carman equation was used to analyze the changes of pressure and porosity during the filtration. The initial porosity was calculated as 0.945 and it decreased to 0.936 at the end of design filtration time. As the filtration continued, the SS concentration of the filtered water gradually increased and the SS removal rate gradually decreased. When the SS target removal efficiency is assumed to be 80%, the cumulative SS removal capacity is expected as $28.8kg/m^2$. This means the volume loading rate of the cotton ball shape filter can be $115m^3/m^2$ when the typical SS concentration of non-point source water pollution is assumed as 250 mg/L.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.151-160
• /
• 2019

EPC companies to continue operating overseas, it is increasingly becoming apparent that risk is no longer something to be avoided but a subject to be managed. During the bidding stage, the requirements, specifications and project line items within the bid package must be studied in details to analyze the various risk factors in order to avoid cost overruns. However, reviewing vast quantities of bidding documents is time consuming and labor intensive and is not an easy task and this is where automated information technology can help. For this study, I have constructed an ITB analysis model based on Watson AI that can analyze and apply vast amount of documents more effectively in a short time. Configuration of the Watson Explorer AI architecture for AI-based ITB risk management model research, the selection of learning procedures and analysis subjects, and the performance evaluation criteria were defined, and a test bed was constructed to conduct a pilot research. Consequently, I verified the effectiveness of the analytical time reduction and the quality of its results and VOC operations by professionals.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.383-390
• /
• 2020

The present study was conducted to examine the differences and correlations between verbal fluency and story comprehension according to the working memory(WM) capacity, and to find out what WM factors influence the linguistic competence in Alzheimer's disease(AD) and vascular dementia(VaD) groups each consisting of 15 patients. The results of their performance produced firstly significant differences in phonemic fluency, story comprehension, delayed recall and recognition task between the two groups. Further analysis shows that VaD group had significant correlations between the scores of story comprehension and the recognition test scores additionally. These findings suggest that it is possible to differentiate the two groups even by story comprehension tasks and WM. In conclusion, the clinical application of the results is likely to contribute to appropriate treatment plans and effective interventions for elderly with AD and VaD as well as to improve the classification criteria for both types of dementia.

• Restorative Dentistry and Endodontics
• /
• v.48 no.4
• /
• pp.35.1-35.14
• /
• 2023

Objectives: The purpose of this study was to evaluate the impact of dentin roughening and the type of composite resin used (either bulk-fill flowable or nanohybrid) on the restoration of non-carious cervical lesions (NCCLs) with an 18-month follow-up period. Materials and Methods: This prospective split-mouth study included 36 patients, each with a minimum of 4 NCCLs. For each patient, 4 types of restorations were performed: unroughened dentin with nanohybrid composite, unroughened dentin with bulk-fill flowable composite, roughened dentin with nanohybrid composite, and roughened dentin with bulk-fill flowable composite. A universal bonding agent (Tetric N Bond Universal) was applied in self-etch mode for all groups. The restorations were subsequently evaluated at 6, 12, and 18 months in accordance with the criteria set by the FDI World Dental Federation. Inferential statistics were computed using the Friedman test, with the level of statistical significance established at 0.05. Results: The 4 groups exhibited no significant differences in relation to fracture and retention, marginal staining, marginal adaptation, postoperative hypersensitivity, or the recurrence of caries at any follow-up point. Conclusions: Within the limitations of the present study, over an 18-month follow-up period, no significant difference was present in the clinical performance of bulk-fill flowable and nanohybrid composite restorations of non-carious cervical lesions. This held true regardless of whether dentin roughening was performed.

• Geomechanics and Engineering
• /
• v.37 no.4
• /
• pp.383-393
• /
• 2024

Monopile foundations of offshore wind turbines embedded in soft clay are subjected to the long-term cyclic lateral loads induced by winds, currents, and waves, the vibration of monopile leads to the accumulation of pore pressure and cyclic strains in the soil in its vicinity, which poses a threat to the safety operation of monopile. The researchers mainly focused on the hysteretic stress-strain relationship of soft clay and kinds of stiffness degradation models have been adopted, which may consume considerable computing resources and is not applicable for the long-term bearing performance analysis of monopile. In this study, a modified cyclic stiffness degradation model considering the effect of plastic strain and pore pressure change has been proposed and validated by comparing with the triaxial test results. Subsequently, the effects of cyclic load ratio, pile aspect ratio, number of load cycles, and length to embedded depth ratio on the accumulated rotation angle and pore pressure are presented. The results indicate the number of load cycles can significantly affect the accumulated rotation angle of monopile, whereas the accumulated pore pressure distribution along the pile merely changes with pile diameter, embedded length, and the number of load cycles, the stiffness of monopile can be significantly weakened by decreasing the embedded depth ratio L/H of monopile. The stiffness degradation of soil is more significant in the passive earth pressure zone, in which soil liquefaction is likely to occur. Furthermore, the suitability of the "accumulated rotation angle" and "accumulated pore pressure" design criteria for determining the required cyclic load ratio are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.442-447
• /
• 2017

The purpose of this study was to establish norm-referenced criteria for the isokinetic strength of the elbow joint in Korean high school baseball players. Two hundred and one high school baseball players participated in this study, none of whom had any medical problem with their upper limbs. The elbow flexion/extension test was conducted four times at a speed of $60^{\circ}/sec$. The HUMAC NORM (CSMI, USA) system was used to obtain the values of the peak torque and peak torque per body weight. The results were presented as norm-referenced criterion valuesusing the 5-point scale of Cajori which consists of five stages (6.06%, 24.17%, 38.30%, 24.17%, and 6.06%). In the results of this study, the peak torques of the elbow (flexor and extensor?) at an angular velocity of $60^{\circ}/sec$ were $37.88{\pm}8.14Nm$ and $44.59{\pm}11.79Nm$, and the peak torque per body weight of the elbow (flexor and extensor?) were $50.06{\pm}8.66Nm$ and $58.28{\pm}12.84Nm$, respectively. The reference values of the peak torque and peak torque per body weight of the elbow flexor and extensor were setat an angular velocity of $60^{\circ}/sec$. On the basis of the results analyzed in this study, the following conclusions were drawn. There is a lack of proper studies on the elbow joint strength, even though the most common injury in baseball players occurs in the elbow joint. Therefore, we need to establish a standard muscle strength in order to prevent elbow joint injuries and improve their performance. The criteria for the peak torque and peak torque per body weight established here in will provide useful information for high school baseball players, baseball coaches, athletic trainers and sports injury rehabilitation specialists in injury recovery and return to rehabilitation, which can beutilized as objective clinical assessment data.