• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.295-299
• /
• 2002

Specific fuel consumption or specific power output characteristics of an internal combustion engine are likely, in conventional applications, the most important operating criteria. In this work, the test method for the engine performance was introduced in a compression ignition(diesel) engine.

• Journal of ILASS-Korea
• /
• v.14 no.1
• /
• pp.15-19
• /
• 2009

This paper is to investigated the analysis of performance characteristics of diesel oxidation catalyst (DOC) for diesel vehicle with 2.5L piston displacement. The performance evaluation test of DOC applied to test diesel vehicle was carried out for four kinds of DOCs manufactured from different company. The testing DOCs were randomly selected from the retrofit vehicle and then standard test vehicle that was representative for the application group was equipped with DOC for the test. In this verification test, the reduction rate of particulate matter (P.M.) and the deviation of the performance of the DOC were examined through CVS-75 mode of the standard vehicle and SOF reduction rate of specific DOC was investigated. It was found that some DOCs failed to pass the criteria of the P.M. reduction rate because of the reason seen catalyst aging even if they were same devices. In the result of SOF analysis, the specific DOC showed more PM reduction than SOF of PM. reduction exceptionally.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.11-15
• /
• 2013

Small overlap crash caused fatal injury in real-world crash. IIHS(Insurance Institute for Highway Safety) proposed the small overlap test. The objective of this study is to analyze dummy injury criteria and dummy excursion on the sled reinforced body angle. Result of the comparisons of dummy injury criteria of a head, neck, and chest was best correlation between sled and vehicle test on base $angle+3^{\circ}$. However, lower extremity was not correlation because sled test could not copy of intrusion. There were a correlation between dummy movement and sled reinforced body angle. Sled reinforced body angle affects the lateral direction of excursion more than longitudinal excursion.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1343-1344
• /
• 2006

There have been numerous accelerated aging laboratory tests for evaluating suitability of polymeric materials and devices. Aging test for materials and its full scale device has been conducted. Service experience plays a key role in the utility section of composite insulators. A meaningful and reliable accelerated aging test is needed for evaluating composite insulator. During the service these insulators are subjected to aging stress such as humidity, pollution, and electrical field, and erosion and tracking of the weathershed occurs. This paper presents the criteria of reliability evaluation and evaluation facilities for 22.9 kV suspension composite insulator. We adopt the criteria of reliability evaluation consist of two test methods. One is CEA tracking wheel test for examining the tracking and erosion performance of composite insulator. The other is multi-stress aging test for examining effects of environmental factors such as UV, temperature, humidity, etc on composite insulator.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.5
• /
• pp.847-859
• /
• 2023

With the recent increase in damage caused by malcious codes using software vulnerabilities in Korea, it is essential to install anti-virus to prevent malicious codes, However, it is not easy for general users to know which anti-virus product has good performance or whether it is suitable for their environment. There are many institutions that provide information on anti-virus performance outside of korea, and these institutions have established their own test environments and test evaluation items, but they do not disclose detailed test environment information, detailed test evaluation items, and results. In addition, existing quality evaluation studies are not suitable for the evaluating the latest anti-virus products because there are many evaluation criteria that do not meet anti-virus product evaluation. Therefore, this paper establishes detailed anti-virus evaluation metrics suitable for the latest anti-virus evaluation and applies them to 9 domestic and foreign anti-virus products to verify the functions and performance of anti-viruses.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.4
• /
• pp.23-30
• /
• 2022

It is effective to apply hybrid damping device that combine separate damping device to cope with various seismic load. In this study, HRS hybrid damper(hybrid rubber slit damper) in which high damping rubber and steel slit plate are combined in parallel was proposed and structural performance tests were performed to review the suitability for seismic performance. Cyclic Loading tests were performed in accordance with criteria presented in KDS 41 17 00 and MOE 2019. As a result of the test, the criteria of KDS 41 17 00 and MOE2019 was satisfied, and the amount of energy dissipation increased due to the shear deformation of the high-damping rubber at low displacement. Result of performing the RC frame test, the allowable story drift ratio was satisfied, and the amount of energy dissipation increased in the reinforced specimen compared to the non-reinforced specimen.

• Convergence Security Journal
• /
• v.16 no.1
• /
• pp.13-21
• /
• 2016

At the present moment when around 60 years have passed after the introduction of private security, there are security instructor and protection specialist guard as government official recognition qualification. This study discussed problems of secondary performance test system among qualification certification items which have been implement ed as government official recognition qualification since 2013. Current qualification certification for protection specialist guard is composed of primary academic test and secondary performance test. Since it is estimated that it is high time to increase clients' satisfaction and public reliability through strict qualification certification for protection specialist guard. Following improvement plans are intended to suggest. First, it is a plan to divide and diversify difficulties of performance test evaluation events. Second, it is a plan to diversify evaluation criteria of performance test. Third, it is a plan to make criteria for selecting specialized performance test evaluation committee. Fourth, it is a new plan of exclusion system to avoid any relation between performance test evaluation committee and applicants. In this respect, institutional improvement should be followed in order to improve specialty of qualification certification of performance test system for protection specialist guard.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.26-35
• /
• 2004

The ASTP is the standard of the assessment ASRP that is monitoring the performance, reliability and safety characteristics of the ammunition items. The ASTP used in domestic now has applied to US Army's grade system and grading criteria so that it cause some problems. To resolve these problems of ASTP, we surveyed both the quality level of production and the field management of ammunition, which compared with grade system and classification criteria. As a result of study, we changed grade system from four steps to three steps and applied the Korean Military Specifications and the Malfunction Criteria to the classification criteria of grades. We are looking forward to improving the reliability and effectiveness of ASRP assessment by simplifying grade system and generalizing grading criteria of ASTP.

• Journal of Internet Computing and Services
• /
• v.17 no.5
• /
• pp.89-95
• /
• 2016

In a software testing domain, test case prioritization techniques improve the performance of regression testing, and arrange test cases in such a way that maximum available faults be detected in a shorter time. User-sessions and cookies are unique features of web applications that are useful in regression testing because they have precious information about the application state before and after making changes to software code. This approach is in fact a user-session based technique. The user session will collect from the database on the server side, and test cases are released by the small change configuration of a user session data. The main challenges are the effectiveness of Average Percentage Fault Detection rate (APFD) and time constraint in the existing techniques, so in this paper developed an intelligent framework which has three new techniques use to manage and put test cases in group by applying useful criteria for test case prioritization in web application regression testing. In dynamic weighting approach the hybrid criteria which set the initial weight to each criterion determines optimal weight of combination criteria by evolutionary algorithms. The weight of each criterion is based on the effectiveness of finding faults in the application. In this research the priority is given to test cases that are performed based on most common http requests in pages, the length of http request chains, and the dependency of http requests. To verify the new technique some fault has been seeded in subject application, then applying the prioritization criteria on test cases for comparing the effectiveness of APFD rate with existing techniques.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1821-1826
• /
• 2008

The construction of concrete slab track system is increased recently because the system has advantages which are maintenance free and so on. However, the noise level on slab track is 3 db(A) higher than the one on ballast track since most of noise is reflected on slab track. Currently, concrete slab track systems has been designed for Gyungbu high speed line stage 2 and Honam high speed line. For those tracks, noise absorbing blocks are considered. Therefore, test methods and proper criteria for structural performance and reduction efficiency of noise absorbing blocks are required. In this study, tests were performed according to established test methods and criteria in previous study and the results have done comparative analysis.