• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.703-708
• /
• 2006

미국, 일본 등에서는 ITS 장비 성능시험장을 구축하여 정보의 신뢰성 강화, 표준화 및 호환성 확보 등에 활용하고 있다. 본 연구에서는 이러한 외국사례를 검토하여 시험장 선정기준을 제시하고 그에 부합하는 성능시험장을 구축하였으며 ITS 장비 성능시험장의 시범운영을 실시하고 그 시험결과를 분석함으로써 ITS 장비 성능시험장 구축의 중요성을 확인하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.973-983
• /
• 2007

Korea Military Academy has been using College Scholastic Ability Test(CSAT) and High School Grades(HSG) with other measures such as an Essay-type Test(ET), Physical Test(PT) and Personal Interview(PI) as criteria for entrance. The purpose of study is to investigate the properness of the criteria in admission decisions by examining the relationship between the college GPA and criteria, and the prediction of academic performance. The study showed that CSAT and HSG are significantly correlated with the college GPA, and these two criteria are better predictors for academic performance. Regression analysis also provided an important message that HSG is a better predictor than CSAT.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.90-98
• /
• 2016

Currently government certified test method for an automobile remanufactured products is insufficient. Thus many automotive parts in the remanufacturing market are lacking proper evaluation criteria and production of defective products are causing customer dissatisfaction. In this paper a power steering oil pump, which requires stringent manufacturing standards, is studied by the failure mode and effect analysis approach. The research suggested that the test criteria such as discharge flow characteristic test, tightness test, pulley run-out test, pressure switch operation test, low temperature test and rotation pressure durability test should be performed to evaluate the reliability of remanufactured power steering oil pumps. As a result of tests, the performance of remanufactured power steering oil pump satisfied the evaluation criteria of pressure switch operation test and low temperature test. However, the remanufactured power steering oil pump failed to satisfy the evaluation criteria on discharge performance test, tightness test and pulley run-out test. These performance evaluation tests proved the necessity of standard process for the remanufactured power steering oil pump.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권3호
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.76-79
• /
• 2009

This paper investigates the performance of a vehicular rear-view camera through quantifying the image quality based on several objective criteria from the ISO (International Organization for Standardization). In addition, various experimental environments are defined considering the conditions under which a rear-view camera may need to operate. The process for evaluating the performance of a rear-view camera is composed of five objective criteria: noise test, resolution test, OECF (opto-electronic conversion function) test, color characterization test, and pincushion and barrel distortion tests. The proposed image quality quantification method then expresses the results of each test as a single value, allowing easy evaluation. In experiments, the performance evaluation results are analyzed and compared with those for a regular digital camera.

• 한국방사선학회논문지
• /
• 제17권1호
• /
• pp.71-77
• /
• 2023

북한 비핵화 문제는 남북을 넘어 세계적인 문제이다. 북한이 비핵화 의지를 밝힐 상황을 대비하여 비핵화 과정에 대한 준비가 필요하다. 북한 비핵화 과정에서 검증 장비의 정상 작동 담보가 요구된다. 카자흐스탄에서 저온으로 인해 장비가 작동되지 않은 선례를 참고했을 때 북한 환경을 고려한 성능 시험 기준이 수립된다면 향후 비핵화 과정에서 활용 가능성이 높을 것이라 판단하였다. 이를 위해 국제 기준 등 시험 기준 분석을 통해 성능 시험 기준 관련 기초 자료를 구축하였다. 이후, 북한 주요 원자력 시설이 위치한 영변군 및 풍계리의 기후, 지리적 특성을 고려하여 검증 상황 발생 시 적시 대응 가능한 성능 시험 기준 수립을 수행하였다. 여기에는 고온, 저온, 습도, 진동, 충격 시험이 포함된다. 후속 연구에서는 실제 장비 시험을 통해 시험 기준의 타당성을 수립하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.494-501
• /
• 1998

This Paper describes the evaluation methods and criteria used to verify running Performance of railway vehicle, and shows results of vehicle dynamics simulation and running performance tests for New Mugunghwa Coaches that were designed and manufactured by DHI in 1997. Through running performance test of New Mugunghwa Coaches, Vibration, Ride Comfort were measured on the condition of service operation. As a results, each simulation and test results meet the criteria proposed by Korean National Railroad(KNR) and Korea Railroad Research Institute(KRRI).

• 유통과학연구
• /
• 제22권7호
• /
• pp.73-82
• /
• 2024

Purpose: This study aims to identify the assessment criteria on textile and apparel supply chain management performance. Research design, data, and methodology: An integrated method of Delphi, quantitative survey, and ANP, in which Delphi with Kamet principle was applied to define the set of criteria, quantitative survey with reliability and validity test was utilized to ensure the match between the set of criteria and the whole textile and apparel industry, and ANP was used to derive weights of these criteria. Results: The set of supply chain management performance evaluation criteria composes of seven criteria namely order fulfillment quality, agility, costs, asset management, information sharing, innovation, and product development and 19 sub-criteria. Conclusions: This study theoretical contribution is the proposition of the set of evaluation criteria on supply chain performance. Regarding practical contribution, the study findings are guidelines for T&A companies in assessing and improving their supply chain capability. However, the findings are only for Vietnamese T&A context. Future research, therefore, may be expanded to other regions or countries' T&A industry. Additionally, future step to this study may be the utilization of other techniques of MCDM or methodological approaches like multiple regression, PLSSEM in defining weights of criteria or performance evaluation.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1726-1731
• /
• 2014

This paper shows the developed new lightning arrester LCM (Leakage Current Measuring device) which is important element of GIS (Gas Insulated Switchgear) Preventive & Diagnostic system and verify its performance though strengthened test standards. The existing lightning arrester LCM was modified to solve measuring errors which happened frequently. At first, we explained the principle of measuring leakage current. Through analyzing some problems which the existing LCM have. we got some improvable items. For the performance verification of the improved LCM, we manufactured prototype LCM which is applied some improvable items such as improving LCM circuit, adding protection circuit, optimizing inner structure of LCM and changing ground design. After then we carried out the performance test. Accredited testing laboratory carried out the performance verification test according to performance test criteria and procedure of reliability test standards, IEC-60225, 61000 and 60068 etc. We confirmed the test results which correspond with the performance test criteria. Also, we confirmed the performance of the improved LCM installed & being operated at G Substation through the immunity test against the normal noise and open/close surge etc.