• Journal of Information Management
• /
• 제42권4호
• /
• pp.137-154
• /
• 2011

A headword finding system is defined as an information retrieval system using a word gloss as a query. We use the gloss as a document in order to implement such a system. Generally the gloss is very short in length and then makes very difficult to find the most proper headword for a given query. To alleviate this problem, we expand the document using the concept of query expansion in information retrieval. In this paper, we use 2 document expansion methods : gloss expansion and similar word expansion. The former is the process of inserting glosses of words, which include in the document, into a seed document. The latter is also the process of inserting similar words into a seed document. We use a featureless clustering algorithm for getting the similar words. The performance (r-inclusion rate) amounts to almost 100% when the queries are word glosses and r is 16, and to 66.9% when the queries are written in person by users. Through several experiments, we have observed that the document expansions are very useful for the headword finding system. In the future, new measures including the r-inclusion rate of our proposed measure are required for performance evaluation of headword finding systems and new evaluation sets are also needed for objective assessment.

• Journal of Broadcast Engineering
• /
• 제21권2호
• /
• pp.169-179
• /
• 2016

Recently, MPEG-H has been standardizing for a multimedia coder in UHDTV (Ultra-High-Definition TV). Thus, the demand for not only channel-based audio contents but also object-based audio contents is more increasing, which results in developing a new technique of converting channel-based audio contents to object-based ones. In this paper, a non-uniform linear microphone array based source separation method is proposed for realizing such conversion. The proposed method first analyzes the arrival time differences of input audio sources to each of the microphones, and the spectral magnitudes of each sound source are estimated at the horizontal directions based on the analyzed time differences. In order to demonstrate the effectiveness of the proposed method, objective performance measures of the proposed method are compared with those of conventional methods such as an MVDR (Minimum Variance Distortionless Response) beamformer and an ICA (Independent Component Analysis) method. As a result, it is shown that the proposed separation method has better separation performance than the conventional separation methods.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제3권2호
• /
• pp.41-54
• /
• 1999

Because of relatively heavy dead weight of concrete itself and unavoidable heat of massive concrete in bridge piers, circular hollow columns are widely used in Korean highway bridges. Since the occurrence of 1995 Kobe earthquake, there have been much concerns about seismic design for various infrastructures, inclusive of bridge structures. It is, however, understood that there are not much research works for nonlinear behavior of circular hollow columns subjected to eqrthquake motions. The objective of this experimental research is to investigate nonlinear behavior of circular hollow reinforced concrete bridge piers under the quasi-static cyclic load, and then to enhance their ductility by strengthening the plastic hinge region with glassfiber sheets. Particularly for this test, constant 10 cyclic loads have been repeatedly actuated to investigate the magnitude of strength degradation for the displacement ductility factor. Important test parameters are seismic design, confinement steel ratio, axial force and load pattern. It is observed from quasi-static tests for 7 bridge piers that the seismically designed columns and the retrofitted columns show better performance than the nonseismically designed colums, i.e. about 20% higher for energy dissipation capacity and about 70% higher for curvatures.

• Management & Information Systems Review
• /
• 제26권
• /
• pp.27-60
• /
• 2008

Researches on the introduction of ERP system kept on examining the critical successful factors (CSFs) that focus on factors to achieve effectively successful projects, and trying to measuring the actual effectiveness of the introduction of ERP system. However, most of the preceding researches on the effectiveness of the introduction of ERP system that was searching devoted effects has been ceased, and actually even researches on the economical results have just done the basic cognitive evaluation of result indicators by many questionnaires instead of objective measuring values, because of the difficulty of measuring the evaluation of the result. Moreover, researches on positive effects of the introduction of ERP on enterprise results and researches that failed to give advantageous effects showed different results each other. And a part of researches reported that only a part of result indicators were partially affected. In this research, we investigated Korean large enterprises or middle-sized enterprises in manufacture industry that introduces SAP R/3 and Oracle package to compare their quantitative financial results after the introduction of ERP system, in order to measure the effects of the ERP system. First, we evaluated the difference of the quantitative financial results before and after the introduction of the ERP system. Second, we evaluated the opportunities shown by the effects after the introduction of the ERP system. Third, we removed the sample of the exchange crisis (IMF) and executed the additional analysis to reflect the average increasing and decreasing rate in the industry, so that pure evaluation can be achieved. Inherent limits of precedent researches are removed and practical effects of the pure introduction of the ERP system are evaluated, so the research of this research is significant. The result of this research is as follows. Because of the introduction of ERP, the rate of turnover of inventory property has increased and sales of preparation inventory property have decreased so that more effective inventory property management has been achieved. Moreover, preparation sales of labor costs and preparation sales of the number of employees have decreased to show the effect of the reduction of labor costs. However, it could no be concluded that we could increase the profit due to the introduction of ERP system. Due to the introduction of ERP, although we concluded that the return on assets (ROA) and the additional value of one-person employee statistically showed obvious differences and increased, the return on equity failed to show obvious differences after the process of introduction of ERP.

• Food Science of Animal Resources
• /
• 제33권4호
• /
• pp.487-492
• /
• 2013

The objective of this study was to examine the effect of supplementation of high linoleic ($C_{18:2}$) oil or high linolenic ($C_{18:3}$) oil to the diet on milking performance and content of conjugated linoleic acid (CLA) isomers in goat milk fat. Forty five dairy goats (Sumnen, 25 d post-partum, $62.5{\pm}1.2kg$) were randomly assigned to three treatment groups with each group of 15 dairy goats. The goats were fed a basal diet (CON) consisting 1.2 kg concentrate and 1.2 kg chopped hay (0.6 chopped alfalfa and 0.6 kg hay) daily with 4% soybean oil (SO) or 4% linseed oil (LO). Daily feed intake was not influenced (p>0.05) but daily milk yield (p<0.001) and milk fat yield (p<0.001) were significantly increased by supplementation of oils. Supplementation of oils decreased the short chain fatty acid, medium-chain fatty acid and saturated fatty acid in goat milk fat while increased trans vaccenic acid (trans-11-$C_{18:1}$, TVA), oleic acid ($C_{18:1}$), $C_{18:2}$, $C_{18:3}$, cis-9, trans-11-CLA (c9, t11-CLA), trans-10, cis- 12-conjugated linoleic acid (t10, c12-CLA), unsaturated fatty acids, mono unsaturated fatty acid and long-chain fatty acid in goat milk fat (p<0.001). Especially, c9, t11-CLA, t10, c12-CLA and ${\omega}-3$ fatty acid ($C_{18:3\;n-3}$) in milk fat were highest when goat fed LO diet. Based on the result, it is suggested that supplementation of linseed oil should be an effective method to increase CLA isomers and ${\omega}-3$ fatty acid in goat milk fat without negative effect on lactating performance.

• Journal of Biomedical Engineering Research
• /
• 제18권4호
• /
• pp.429-438
• /
• 1997

Mechanical valve is one of the most widely used implantable artificial organs of which the reliability is so important that its failure means the death of patient. Therefore early noninvasive detection is essentially required, though mechanical valve failure with thrombosis is the most common. The objective of this paper is to detect the thrombosis formation by spectral analysis and neural network. Using microphone and amplifier, we measured the sound from the mechanical valve which is attached to the pneumatic ventricular assist device. The sound was sampled by A/D converter(DaqBook 100) and the periodogram is the main algorithm for obtaining spectrum. We made the thrombosis models using pellethane and silicon and they are thrombosis model on the valvular disk, around the sewing ring and fibrous tissue growth across the orifice of valve. The performance of the measurment system was tested firstly using 1 KHz sinusoidal wave. The measurement system detected well 1KHz spectrum as expected. The spectrum of normal and 5 kinds of thrombotic valve were obtained and primary and secondary peak appeared in each spectrum waveform. We find that the secondary peak changes according to the thrombosis model. So to distinguish the secondary peak of normal and thrombotic valve quantatively, 3 layer back propagation neural network, which contains 7, 000 input node, 20 hidden layer and 1 output was employed The trained neural network can distinguish normal and valve with more than 90% probability. As a conclusion, the noninvasive monitoring of implanted mechanical valve is possible by analysing the acoustical spectrum using neural network algorithm and this method will be applied to the performance evaluation of other implantable artificial organs.

• Korean Business Review
• /
• 제11권
• /
• pp.83-100
• /
• 1998

The objective of our study is to build a theoretical framework for the examination of impacts of cross-functional integration upon new product development performance(NPDP). For this purpose, we have concentrated our efforts on systematically delving into how cross-functional integration factors affect upon the interdepartmental cooperation and upon the NPDP while dividing those critical integration factors into the structural and the infra-structural ones. We have selected interdepartmental job-rotation, consigning of papers, and cross-functional teem meeting as structural cross-functional integration factors. On the other hand, we have chosen Quality Functional Deployment(QFD), Concurrent Engineering(CE), and Evaluation and Reward Systems as those infra-structural cross-functional integration factors. After identifying those integration factors, we have carefully searched the relationship between those integration factors and those cooperation variables (interdepartmental common goal, interdepartmental interactions, and common sharing of ideas and informations) to look into how they affect upon the NPDP. Among cross-functional integration and NPDP related studies, our study is the first to show systematically how strongly infra-structural integration factors affect upon the achievement of interdepartmental cooperation and the improvement of NPDP. Considering the limitation of our resources and time available for this research, we have limited our study to building only a theoretical framework for future empirical studies to look into how cross-functional integration variables are related with NPDP.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제51권12호
• /
• pp.163-173
• /
• 2014

When evaluating the spatial resolution images and evaluation of low contrast resolution using CT standard phantom, and might present a automated quantitative evaluation method for minimizing errors by subjective judgment of the evaluator be, and try to evaluate the usefulness. 120kVp and 250mAs, 10mm collimation, SFOV(scan field of view) of 25cm or more than, exposure conditions DFOV(display field of view) of 25cm, and were evaluated the 24 passing images and 20 failing images taken using a standard reconstruction algorithm by using the Nuclear Associates, Inc. AAPM CT Performance Phantom(Model 76-410). Quantitative evaluation of low contrast resolution and spatial resolution was using an evaluation program that was self-developed using the company Mathwork Matlab(Ver. 7.6. (R2008a)) software. In this study, the results were evaluated using the evaluation program that was self-developed in the evaluation of images using CT standard phantom, it was possible to evaluate an objective numerical qualitative evaluation item. First, if the contrast resolution, if EI is 0.50, 0.51, 0.52, 0.53, as a result of evaluating quantitatively the results were evaluated qualitatively match. Second, if CNR is -0.0018~-0.0010, as a result of evaluating quantitatively the results were evaluated qualitatively match. Third, if the spatial resolution, as a result of using a image segmentation technique, and automatically extract the contour boundary of the hole, as a result of evaluating quantitatively the results were evaluated qualitatively match.

• The Korean Journal of Emergency Medical Services
• /
• 제11권2호
• /
• pp.51-66
• /
• 2007

Purpose: With a view to providing basic data to develop cardiopulmonary resuscitation education suitable for elementary students, the cardiopulmonary resuscitation education was conducted to grasp students' knowledge, skills accuracy and the attitude change before and after the education. Methods: Convenience sampling was made on fourth and fifth graders(total-35 students) of S elementary school located in K city, Chungcheongnam-do, and this was a pre-experiment research designed before and after choosing a single group. In terms of methods, specifically we, researchers ; 1) Handed out questionnaires to students directly to make them fill in firsthand and collected the questionnaires. 2) Utilized PPT materials based on 2005 AHA guideline and DVD materials of AHA, to give students theoretical education of cardiopulmonary resuscitation. We used Anne/SkillReporter$^{(R)}$ torso produced by Leardal Inc, and Little Anne to conduct practical education individually. 3) Asked students to give Anne/SkillReporter$^{(R)}$ torso cardiopulmonary resuscitation five times with the ratio of 30 : 2, and then one of researchers filled in the evaluation sheet individually. 4) Evaluated the accuracy of students' ability to perform the resuscitation based on the record of Anne/SkillReporter$^{(R)}$ integrated printer(which was the objective tool to grasp students' skills accuracy). 5) Gave out questionnaires to make students fill them in and then collected them. after completing the practical evaluation. Results: 1) In case of the attitude about cardiopulmonary resuscitation, Students' confidency rose from 19.28%(before the education) to 93.57(after the education)- which is a positive change. 2) As the result of the education, some elementary students scored 11 points (full score-16 points), up from 5 points before the education, in terms of the knowledge about cardiopulmonary resuscitation. The average point also reached 13.14 points(after the education), jump from 8.37(before the education), which was the rise of 29.8%. 3) When it comes to the practical performance, the skills accuracy was 80.93% on average, and the calculation method was as follows: total items were 16, and each item was marked form 0 to 2 points, meaning the full score was 32 points. The minimum score was 19 points and the maximum was 32($M{\pm}SD=25.90{\pm}2.88$), which was calculated based on percentage. 4) Regarding skills accuracy, respiration accuracy(%)($M{\pm}SD=30.20{\pm}27.16$) was higher than pressure accuracy(%) ($M{\pm}SD=15.34{\pm}25.27$). Conclusion: The result showed that students' attitude on cardiopulmonary resuscitation changed positively. and meaningful difference(p = .00) existed in the change of students' knowledge. In terms of skills accuracy. chest compression and airway control showed high accuracy, but the result of Anne/SkillReporter$^{(R)}$ performance showed that the accuracy of chest compression was lower than that of mouth-to-mouth resuscitation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제3권4호
• /
• pp.348-354
• /
• 2015

Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.