• Journal of Wetlands Research
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1999

The objective of this study is to recover the contaminated ditch by using a biofilter filled up with waste-concrete media and vegetation bed. Two systems were tested for elimination of organic compounds, turbidity, nitrogen and phosphate. System 1 is three-stage system which consisted of one biofilter and two vegetation bed, system 2 has three-stage system consisted of one biofilter, one vegetation bed (four bed), and one media trench operated in series. In system 1, HRT of biofilter was 4 hour, and Oenanthe javanica was planted in two vegetation bed. In system 2, HRT of biofilter was varied 2 hours and Persicaria chinensis was planted on the top of the biofilter. And Oenanthe javanica, Hydrocharis asiatica, Salvinia natans were planted in four bed of a vegetation bed and the second vegetation bed of system 1 was rebuilt to a media trench bed. The elimination rate of BOD and turbidity was over 90% in both systems. The mean elimination rates 40~50%(system 1), 30~40%(system 2) for T-N and 40~50% (system 1), 30~40%(system 2)for T-P. T-N and T-P elimination performance of system 1 was a little higher(10%) than that of system 2. Results showed that vegetation bed are not efficient in reducing T-N and T-P. It was considered that HRT of vegetation bed of both systems was much lower(1~2hr) than that of conventional system(5~20days).

• Journal of Korea Water Resources Association
• /
• v.38 no.1
• /
• pp.11-23
• /
• 2005

The objective of this study is to develop a short-term precipitation-streamflow coupling method for real-time river flow forecast. The coupled method is based on the RDAPS model for precipitation and atmospheric simulation and the SFM model for streamflow simulation. The selected study area is the 2,703-km$^2$ Soyang River basin with outlet at Soyang dam site. The rainfall-runoff event from 18 to 24 July 2003 is selected for the performance test of predicted precipitation and streamflow. It can be seen that the simulated basin-scale precipitation from the RDAPS can be useable as an input for SFM hydrologic model. Short-term hydrometeorological simulations using the RDAPS and SFM model were well captured important hydrometeorological characteristics in this study area. It is concluded that atmospheric precipitation forecast would be useful for streamflow forecast.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.25-45
• /
• 2020

The primary purpose of this study is to compare and analyze the performance of local spatial autocorrelation techniques in identifying spatial distribution patterns of green spaces. To achieve the objective, this researcher uses satellite image analysis and spatial autocorrelation techniques. The result of the study shows that the LISA cluster map with the spatial outlier cluster is superior to other analytical methods in identifying the spatial distribution pattern of urban green space. This study can contribute to the related fields in that it uses several different research methods than the existing ones. Despite this differentiation and usefulness, this study has limitations in using low-resolution satellite imagery and NDVI among vegetation indices in identifying spatial distribution patterns of green areas. These limitations may be overcome in future studies by using UAV images or by simultaneously using several vegetation indices.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2018

Objective: This study aimed to predict balance and gait abilities with the Trunk Impairment scales (TIS) in persons with stroke. Design: Cross-sectional study. Methods: Sixty-eight participants with stoke were assessed with the TIS, Berg Balance scale (BBS), and Functional Gait Assessment (FGA) by a therapist. To describe of general characteristics, we used descriptive and frequency analyses, and the TIS was used as a predictive variable to determine the BBS. In the simple regression analysis, the TIS was used as a predictive variable for the BBS and FGA, and the TIS and BBS were used as predictive variables to determine the FGA in multiple regression analysis. Results: In the group with a BBS score of >45 for regression equation for predicting BBS score using TIS score, the coefficient of determination ($R^2$) was 0.234, and the $R^2$ was 0.500 in the group with a BBS score of ${\leq}45$. In the group with an FGA score >15 for regression equation for predicting FGA score using TIS score, the $R^2$ was 0.193, and regression equation for predicting FGA score using TIS score, the $R^2$ was 0.181 in the group of FGA score ${\leq}15$. In the group of FGA score >15 for regression equation for predicting FGA score using TIS and BBS score, the $R^2$ was 0.327. In the group of FGA score ${\leq}15$ for regression equation for predicting FGA score using TIS and BBS score, the $R^2$ was 0.316. Conclusions: The TIS scores are insufficient in predicting the FGA and BBS scores in those with higher balance ability, and the BBS and TIS could be used for predicting variables for FGA. However, TIS is a strong predictive variable for persons with stroke who have poor balance ability.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.1
• /
• pp.41-47
• /
• 2018

Objective: To investigate the effect of performing three different toe touch (TT) task condition on the activities of four different muscles using surface electromyography (sEMG) in healthy young adults. Design: Cross-sectional study. Methods: A total of 20 healthy young adults (6 males, 14 females) voluntarily participated in this study. All subject randomly performed three different TT task conditions as follows: general toe-touch (GTT) task, one side toe touch (TT) task during weight bearing, and one side foward toe touch (FTT) task during weight bearing. The muscle activities of erector spinae (ES), gluteus maximus (GM), hamstring (HAM), tibialis anterior (TA) muscles during the TT task were measured using sEMG. Subject performed each of the three conditions three time in random order and mean values were obtained. Results: With the trunk flexion period, the TT and FTT showed significantly greater muscle activity in the GM, HAM and TA compared to the GTT task (p<0.05). The TT position showed significantly greater HAM muscle activity than the GTT position. The dominant and nondominant ES muscle activity was significantly greater in the FTT compared to the GTT position (p<0.05). The dominant GM, HAM, and TA was significantly greater in the TT and FTT compared to the GTT position (p<0.05). Although the dominant ES was significantly greater in the TT and FTT compared to the GTT position (p<0.05), the dominant GM muscle activity was signifcantly greater in the TT compared with the GTT position (p<0.05). Conclusions: These findings may be applicable within the clinical field for selective trunk and lower extremity muscle activation and basic biomechanics purpose.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.57-65
• /
• 2015

Manufacturing optimization problem is to find the optimal solution under satisfying various and complicated constraints with the design variables of nonlinear types. To achieve the objective, this paper proposes a hybrid approach. The proposed hybrid approach is consist of genetic algorithm(GA), cuckoo search(CS) and hill climbing method(HCM). First, the GA is used for global search. Secondly, the CS is adapted to overcome the weakness of GA search. Lastly, the HCM is applied to search precisely the convergence space after the GA and CS search. In experimental comparison, various types of manufacturing optimization problems are used for comparing the efficiency between the proposed hybrid approach and other conventional competing approaches using various measures of performance. The experimental result shows that the proposed hybrid approach outperforms the other conventional competing approaches.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.2
• /
• pp.22-28
• /
• 2015

The primary design goal of a compressor is focused on improving efficiency. Secondary objective is to widen the operating range of compressor. This paper presents a numerical and experimental investigation of the influence of the bleed slot on the operating range for the 1.2 MW class centrifugal compressor installed in a turbocharger. The main design parameters of the bleed slot casing are upstream slot position, inlet pipe slope, downstream slot position and width. The DOE(design of experiment) method was carried out to optimize the casing design. Numerical analyses were done by the commercial code ANSYS-CFX based on the three dimensional Reynolds-averaged Navier-Stokes equations. Results showed that efficiency and pressure ratio increased as the downstream slot position and width were smaller and the upstream position was located away from the impeller inlet. Experimental works were also done with and without the bleed slot casing. The simulation results were in good agreement with the test data. Enhancement of both the surge margin up to 26.5% and the pressure ratio with the optimized bleed slot design were achieved, compared with the surge margin of only 6.6% without the bleed slot casing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.792-797
• /
• 2011

This paper discusses the application of a hybrid discretiziation method for the discretization procedure that needs to be included in discrete particle swarm optimization (DPSO) for the problem of allocating PV (photovoltaic) systems onto distribution power systems. For this purpose, this paper proposes a rule-based expert system considering the objective function value and its optimizing speed as the input parameters and applied it to the PV allocation problem including discrete decision variables. For multi-level discretization, this paper adopts a hybrid method combined with a simple rounding and sigmoid funtion based 3-step and 5-step quantization methods, and the application of the rule based expert system proposing the adequate discretization method at each PSO iteration so that the DPSO with the hybrid discretization can provide better performance than the previous DPSO.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.251-257
• /
• 2018

There are various quality deteriorations of concrete such as plastic, drying shrinkage due to abrupt moisture evaporation, slump loss and cold joint under hot weather condition. To protect from above deteriorations, several kinds of modified bubble sheets have been applied to secure heat insulation performance. But, there is not enough application cases of bubble sheets at job site under hot weather condition. The objective of the paper is to investigate the temperature profile and crack occurrence of the concrete covered with five different kinds of surface curing sheets, which is placed under hot weather condition. Single layer transparent bubble sheet, white colored bubble sheet, aluminum metalizing bubble sheet and PE film are adopted for surface curing sheets. Test results indicated that application of aluminum metalizing bubble sheet had most favorable effect on the reduction of on temperature rise and on the crack reduction of concrete. But due to larger reflection of light by aluminum, it brings about visual pollution to the workers. Hence, the application of white colored bubble sheet can be the most desirable alternative to protect the concrete from hot weather in the field.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.72-80
• /
• 2004

The objective of the research is to develop the automated vertical controllable pilot-type equipment for PHC piles. The motivation for the research is that inherent problems related to vertical control during pile driving. The paper explains the current vertical control methods and problems, design and manufacturing of the pilot-type automated equipment and its testing and discussions of the results.