• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.391-400
• /
• 1994

Recently, the development of ATM switch, a backbone system of BISDN, is receiving worldwide study. Because the development of large communication equipments like a switching system need a lot of time and cost, the performance evaluation by menas of simulation is needed for the higher efficiency of development before actual implementation. So, a general and objective input environment is necessary for proper simulation. The main purpose of this paper is to offer a traffic generator which can provide such input environment as a file for computer simulation of ATM switch. To offer diverse input environment of ATM switch, we select parameters, and implement ATM traffic generator with software technology. Basides, a program to verify the propriety of ATM traffic generator in also proposed. It is expected that the proposed ATM traffic generator will offer diverse input environment for computer simulation to evaluate new ATM switching system, not influenced by any system structure.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.433-439
• /
• 2007

The main objective of the paper is to investigate the static behavior of a prestressed concrete (PSC) girder that has been spliced with precast box segments. A 20 m long full-scale spliced PSC girder is fabricated and tested to compare its static performance against a monolithic girder. The monolithic girder has the same geometric and material properties with respect to the spliced girder. This includes infernal strain, deflections, neutral axis position, and crack patterns for both girders. The test also consists of monitoring relative displacements occurring across the joints. Both the horizontal displacement (gap) and vertical displacement (sliding) are measured throughout the loading procedure. All results have been compared to those obtained from the monolithic girder. It has been demonstrated that the spliced girder offers close behavior with respect to the monolithic girder up to the crack load. Both girders exhibits ductile flexural failure rather than abrupt shear failure at joints.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.265-271
• /
• 2000

Orifice meters and turbine meters are frequently used for measuring gas flow in gas industry. However, to insure the accuracy of the measurement, a certain length of the meter run at the upstream of the flow meter is required. The objective of this study is to analyze flow measurement errors of the orifice meter quantitatively for shorter lengths of the meter runs than those suggested in the standard manuals with variation of diameter ratio( $\beta$ ratio) and flow rate and also to analyze flow measurement errors of the turbine meter with and without straightener. The test results showed that the flow measurement errors of the orifice meter were inversely proportional to the diameter ratio. In other words, when the diameter ratio is 0.3 and 0.7, the measurement error is $-7.3\%$ and $-3.5\%$, respectively. the main reason of the measurement error is due to the swirl effect from the configuration of the meter run at the upstream of the flow meter. In case the length of the meter run is shorter than that suggested In the standard, the swirl effect is not removed completely and it affects the flow meter's performance. As mentioned above, the less the pipe diameter ratio, the mon the flow measurement error. It means that the swirl effect on the orifice meter increases as the $\beta$ ratio decreases.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.687-692
• /
• 2004

In this paper, we proposed an efficient cache hoarding method in mobile computing environments using collaborative filtering. This method is used for solving the difficult problem of mobile computing, which is the vacuum of information service depending on low bandwidth, long delay, and frequent network disconnection. Many previous researches have been studied a cache hoarding approach for solving these problems of mobile client. But, the research of history information of mobile client did not support all informative requests for mobile clients. In our research, collaborative filtering model using history information and location data of mobile client is proposed. This proposed model supports an efficient service of necessary items for client's requirement. For the performance evaluation of proposed model, we make an experiment of simulation data using SAS enterprise miner. According to objective evaluation using cache hit ratio, we show that our model has a good result.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.119-128
• /
• 2014

This paper presents a new method for improving the quality of images corrupted by an external source that generates an attenuation and scattering of light like dust, water droplets and fog. Conventional defog methods typically encounter a distortion such that the restored image has low contrast and oversaturation of color in some regions because of the mis-estimated airlight and wrong media transmission. Therefore, in order to mitigate these problems, we propose a robust airlight selection method and local saturation evaluation method for estimating media transmission. The proposed method addresses the wrong media transmission and over-saturation problems caused by the mis-estimated airlight and thereby improves the restored image quality. The results of relevant experiments of the proposed method against conventional ones confirm the improved accuracy of atmospheric light estimation and the quality of restored images with regard to objective and subjective performance measures.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.619-630
• /
• 2013

In this paper, we propose an edge directed color demosaicing algorithm considering color channel correlation. The proposed method consists of local region classification step and edge directional interpolation step. In the first step, each region of a given Bayer image is classified as normal edge, pattern edge, and flat regions by using intra channel and inter channel gradients. Especially, two criteria and verification process for the normal edge and pattern edge classification are used to reduce edge direction estimation error, respectively. In the second step, edge directional interpolation process is performed according to characteristics of the classified regions. For horizontal and vertical directional interpolations, missing color components are obtained from interpolation equations based on intra channel and inter channel correlations in order to improve the performance of the directional interpolations. The simulation results show that the proposed algorithm outperforms conventional approaches in both objective and subjective terms.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.57-62
• /
• 2003

In this study, a robotic manipulator for harvesting cucumber was developed. The objective of this research was to design and to construct a robotic manipulator specifically tailored to harvest cucumber in the greenhouse. The system was consisted of an integrated end-efffctor, an image processing system and a controlling system. Especially, the image processing system detected the quality of cucumber within each plant in order for the computer to furnish harvest instructions to the manipulator. In all tests of cucumber, the success rate for cucumber harvest was 84％ in the greenhouse. End-effector, image processing system and controlling system showed good performance. Based on the results of this research the following recommendations are made for further study. Besides harvesting cucumbers, the oldest leaves, creepers and the youngest small side leaves need to be removed.

• Korean Journal of Biological Psychiatry
• /
• v.11 no.1
• /
• pp.40-48
• /
• 2004

Objective:Event-related potentials(ERPs) are electrical changes recorded at the surface of the scalp in response to stimulus presentation, and their latency and amplitude change according to cognitive processes. Through past studies of the auditory ERP in schizophrenia, the P300 has been reported to be statistically smaller and delayed in schizophrenia than comparison groups. However, studies of the visual ERP have not been systematically examined. The present study was designed to investigate the visual P300 in patients with schizophrenia and normal controls and to compare the pattern of P300 between them. Methods:The subjects were composed of patients(N=22) with schizophrenia by DSM-IV and normal controls(N=22). The visual ERPs were measured by the visual continuous performance test. P300 amplitude and latency measured on 5 scalp electrodes(Fz, Cz, Pz, $T_7$, $T_8$) were compared between patients and controls. Results:The P300 latencies measured on Fz, Cz, Pz, and $T_7$ electrodes were significantly longer in patients than controls(p<0.05). The P300 amplitudes in patients were smaller than controls. However, the difference between them was not statistically significant. Conclusion:Analysis of the visual ERPs showed that the P300 latency is significantly delayed and the P300 amplitude is slightly smaller in patients than controls. These results are similar to established studies of the auditory P300 in schizophrenia.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.21-29
• /
• 1993

In this paper, a probability-based reliability analysis was proposed based on a finite element method-based random vibration analysis and serviceability limit state of structures. The limit state model defined for the study is a serviceability limit state in terms of the more realistic crack failure that might cause the emission of radioactive materials. The SAP V-2 is used for a three-dimensional finite element analysis of concrete containment structure, and the reliability analysis is carried out by modifying HRAS reliability analysis program for this study. In this study, the load factors for the design of reinforced concrete cointainment structures in Korea are proposed by considering appropriate load combination criteria for design, and the results are compared with the present ASME code. The proposed load factors were proved to be in accordance with a set of code performance objective and showed consistency in the limit state probability.