• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.199-209
• /
• 2012

Two carbon fiber composite laminates, $[0/90]_{2S}$ and $[0/+45/90/-45]_S$, were considered in this work to find out the perforation threshold energy to complete the perforation process and the corresponding maximum contact force. Explicit finite element commercial software, LS-DYNA, was used to predict these values. According to the simulation results, these two types of composite laminates were tested by using a vertical drop-weight testing machine. After testing, the damage condition of these specimens were observed and compared with the results from finite element analysis. The testing results indicate that the perforation threshold energy is 6 Joules for $[0/90]_{2S}$ and 7 Joules for $[0/+45/90/-45]_S$, which is in good agreement with the simulation results. Also, the maximum contact force at the case of perforation threshold energy is the lowest as compared to the maximum contact forces occurring at the impact energy that is larger or less than the perforation threshold energy.

• Steel and Composite Structures
• /
• 제49권6호
• /
• pp.667-684
• /
• 2023

In the context of finite element method, a computational simulation is presented to study and analyze the dynamic behavior of regularly perforated functionally graded rotating beam for the first time. To investigate the effect of perforation configurations, both regular circular and squared perforation patterns are studied. To explore impacts of graded material distributions, both axial and transverse gradation profiles are considered. The material characteristics of graded materials are assumed to be smoothly and continuously varied through the axial or the thickness direction according the nonlinear power gradation law. A computational finite elements procedure is presented. The accuracy of the numerical procedure is verified and compared. Resonant frequencies, axial displacements as well as internal stress distributions throughout the perforated graded rotating cantilever beam are studied. Effects of material distributions, perforation patterns, as well as the rotating beam speed are investigated. Obtained results proved that the graded material distribution has remarkable effects on the dynamic performance. Additionally, circular perforation pattern produces more softening effect compared with squared perforation configuration thus larger values of axial displacements and maximum principal stresses are detected. Moreover, squared perforation provides smaller values of nondimensional frequency parameters at most of vibration modes compared with circular pattern.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.55-60
• /
• 2004

This study is concerned to the perforation phenomena of the oblique dual-plate by projectile. Experiment and simulation related to that was carried out. the variables considered in this phenomena include the electrolytic zinc coated steel sheet and carbon steel rod. In the former, the confirmation and projectile velocity possible phenomena of real phenomena is done, the latter, the effect of parameter such as time-step and grid space length is analized by using the three-dimensional Lagrangian explicit time-integration finite element code, HEMP. this code use the eight node hexahedral elements and in this study, Von-Mises Criteria is used as the strength model, Mie-Gruneisen is as the Equation of State. the simulation was performed by contrast with the experiment. through the calibration of the parameter of lagrangian code, reasonable result was approached.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.595-609
• /
• 2014

The paper is reporting some comparisons between experimental and numerical results in terms of failure mode, failure time and ballistic properties of mild steel sheet. Several projectile shapes have been considered to take into account the stress triaxiality effect on the failure mode during impact, penetration and perforation. The initial and residual velocities as well as the failure time have been measured during the tests to estimate more physical quantities. It has to be noticed that the failure time was defined using a High Speed Camera (HSC). Thanks to it, the impact forces (average and maximum level), were analyzed using numerical simulations together with an analytical description coupled to experimental observations. The key point of the model is the consideration of a shape function to define the pulse loading during perforation.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.398-404
• /
• 2013

The simulation of the ballistic trajectory of penetrator into the spaced multi-layer RC targets is very important to predict the hitting condition in subsequent target. Because of perturbation by lateral load of penetrator caused by asymmetric hitting position between penetrator and steel bar reinforcement, penetrator rotates and deviates from the straight path. Therefore, penetration capability of penetrator is decreased in the subsequent targets. This paper presents the result of the penetration of steel-bar-reinforced concrete target by using the explicit finite element code LS-DYNA. A series of computations is performed and compared to experimental data and the computed results are in good agreement with the experimental results over a wide range of velocities. And then we conduct the simulation according to various RC target hitting condition and impact velocities.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.590-595
• /
• 2008

In the present paper, the impact damage behavior of steel plate reinforced concrete panels exposed to shock impulsive loading and fragment impact loading is investigated. To evaluate the retrofit performance of a steel-strengthened concrete panels, a numerical experiment using a numerical simulation with AUTODYN, an explicit analysis program is introduced because a real explosion experiment requires the vast investment and expense for facilities as well as the deformation mechanisms are too complicated to be reproduced with a conventional closed-form analyses. The model for the analysis is simplified and idealized as a two-dimensional and axisymmetric case controled with geometry, boundary condition and material properties in order to obtain a resonable computation time. As a result of the analysis, panels subject to either shock loading or fragment loading without the steel plate reinforcement experience the perforation with spalled fragments. In addition, the panels reinforced with steel plate can prevent the perforation and provide the good mechanical effect such as the increase of global stiffness and strength through the composite action between the concrete slab and the steel plate.

• 한국전산구조공학회논문집
• /
• 제27권3호
• /
• pp.147-154
• /
• 2014

충격 및 폭발하중으로 인한 위험으로부터 구조물의 안정성을 확보하기 위한 필요성의 증대에 따라 고율변형을 받는 콘크리트의 거동은 중요한 연구주제가 되었다. 콘크리트의 고율변형 거동은 정적인 상태와는 다른 독특한 거동을 보이기 때문에 다양한 고율변형모델들이 제안되어 고율변형 상태를 수치해석하는데 사용되고 있다. 이러한 수치해석 과정에서 발생하는 문제가 요소의 크기에 따라 수치해석결과가 크게 변하는 요소의존성 문제이다. 본 논문에서는 파괴에너지이론에 기초하여 요소의존성을 최소화할 수 있는 기준식을 제안하고 HJC(Holmquist Johnson Cook)모델을 이용한 관통수치해석을 통해 기준식을 검증하였다. 그 결과 기준식을 통해 산정된 파괴변형률을 수치해석상에 적용해줌으로써 해석결과의 요소의존성이 감소하였고 해의 정확성 또한 향상되는 것을 파악할 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.111-118
• /
• 2004

For the precise analysis of high velocity impact problem though FEM with element erosive method, the adequate mesh size and critical equivalent plastic strain(EQPS) is chosen prior to the simulation. In this research, it is strongly required from a standpoint that critical EQPS is used to decide whether perforation occurs or not. The optimization of dual armor plate consisting of 4340 steel and 2024 aluminium against a die steel sphere with high-velocity has been suggested using Lagrangian explicit time-integration code, NET2D. The response surface method based on the design of experiment is utilized for the size optimization. The optimized thickness of each layer, in which perforation does not occur, the strength of multi-layer is maximized and total weight is minimized, is obtained at a constant velocity of a pellet with a designated total thickness.

• 대한토목학회논문집
• /
• 제30권6A호
• /
• pp.543-560
• /
• 2010

원자력발전소의 안전 관련 콘크리트 구조물은 비행체의 충격에 대해 안전하게 설계하는데, 충격하중에 의한 스캐빙과 관통을 방지하기 위한 벽체 두께는 경험적 공식에 의해서 결정한다. 이 연구는 관입 및 스캐빙 깊이와 관통두께를 결정하는 기존에 제안된 국부손상 효과 산정식을 기존 실험결과와 비교 검증하는데 목적이 있다. 충격체의 충돌속도가 95~215m/s인 범위에서 충돌실험을 수행한 Kojima의 충돌실험체에 대한 충돌해석을 수행한 후, 실험 및 해석결과의 비교를 통해서 해석모델 및 해석방법의 적정성을 확인하였다. 국부손상 산정식 비교분석에서 실험결과와 잘 맞는 Degen식을 통해 산정된 관통두께가 반영된 RC 슬래브에 대한 충돌해석을 수행한 후, 국부손상 산정식과 해석결과를 비교분석하였다.

• 원예과학기술지
• /
• 제32권2호
• /
• pp.184-192
• /
• 2014

'후지' 사과의 단기 저장과 모의 수출 과정에서 소포장 적용이 중량감소와 품질에 미치는 영향을 분석하기 위해 2년에 걸쳐 포장의 밀폐도를 단계적으로 조절하는 실험을 수행하였다. 포장의 밀폐도는 천공 처리 수준(무천공, 펀치 홀, 핀홀)과 밀봉 방식(끈 묶음, 열 접착)을 달리하여 조절하였다. 수확 후 사과를 $40{\mu}m$ 폴리프로필렌 필름 포장 봉지에 5개씩 담아 $0^{\circ}C$에서 4주 저장한 후, 1년차 예비실험에서는 바로 상온유통 과정을 거쳤고 2년차 본 실험에서는 2주간의 냉장 컨테이너 수출 운송과 현지 상온 유통 7일의 모의 수출 과정을 거쳤다. 천공 처리 없이 끈 묶음 혹은 열 접착한, 비교적 높은 수준의 밀폐 소포장에서는 이산화탄소 축적에 의한 내부갈변 증상이 발현되었다. 이에 비해 천공 처리 필름 소포장에서의 MA 환경조성은 핀홀 처리 소포장에서만 관찰되었고, 모든 처리에서 내부갈변 장해는 발생하지 않았다. 밀폐도가 낮은 펀치 홀 천공 처리 필름 소포장에서도 단기 저장 후 모의 수출 과정에서 중량 감소를 줄이는 효과가 나타났으나 과일의 이화학 품질에 미치는 영향은 미미하였다. 천공도를 낮춘 핀홀 처리 역시 이화학 품질 유지 효과는 없었으나 조직감 관능 유지에 효과가 있는 것으로 나타났다. 따라서 사과의 단기저장과 수출과정에 소포장 기술을 적용할 때 MA 조성을 통한 품질유지 효과를 높이기 위해서는 펀치 홀 천공보다는 훨씬 미세한 천공 처리의 필요성이 제시되었다.