• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.831-847
• /
• 2017

Conventional geotechnical engineering soil binders such as ordinary cement or lime have environmental issues in terms of sustainable development. Thus, environmentally friendly materials have attracted considerable interest in modern geotechnical engineering. Microbial biopolymers are being actively developed in order to improve geotechnical engineering properties such as aggregate stability, strength, and hydraulic conductivity of various soil types. This study evaluates the geotechnical engineering shear behavior of sand treated with xanthan gum biopolymer through laboratory direct shear testing. Xanthan gum-sand mixtures with various xanthan gum content (percent to the mass of sand) and gel phases (initial, dried, and re-submerged) were considered. Xanthan gum content of 1.0% sufficiently improves the inter-particle cohesion of cohesionless sands 3.8 times and more (up to 14 times for dried state) than in the untreated (natural) condition, regardless of the xanthan gum gel condition. In general, the strength of xanthan gum-treated sand shows dependency with the rheology and phase of xanthan gum gels in inter-granular pores, which decreases in order as dried (biofilm state), initial (uniform hydrogel), and re-submerged (swollen hydrogel after drying) states. As xanthan gum hydrogels are pseudo-plastic, both inter-particle friction angle and cohesion of xanthan gum-treated sand decrease with water adsorbed swelling at large strain levels. However, for 2% xanthan gum-treated sands, the re-submerged state shows a higher strength than the initial state due to the gradual and non-uniform swelling behavior of highly concentrated biofilms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.173-185
• /
• 1988

This study is intended to investigate the shear fatigue behaviour of reinforced concrete beams based on a series of experiments, and verify the test results in comparison with the analysis result obtained by using a nonlinear finite element method. The experiments are divided into the tests under the static loading and the test under the dynamic fatigue loading. In order to investigate the shear failure behaviour under static loadings, four specimens for three different cases were made and tested. The behaviour of stirrups with the static stress and strain variations were observed based on the results of these tests. In the fatigue fracture tests, eleven specimens for four different cases were made and tested. Various observations on mid-span deflection of test beams and tensile strains of reinforcing steels as well as stirrups were made against various fatigue loadings. It may be concluded that the shear fatigue strengths of R.C. specimens at one million cycles turn out to be approximately 65 percent of the static ultimate shear strength.

• Journal of Environmental Impact Assessment
• /
• v.2 no.2
• /
• pp.1-11
• /
• 1993

Most developing countries are experiencing rapid urbanization and the associated growth of industry and services. Cities are currently absorbing two-thirds of the total population in the developing world. Korea has about 85 percent of urban dwellers. World population will shift from being predominantly rural to predominantly urban around the turn of the century. Although cities play a key role in development process and make more than a proportionate contribution to national economic growth, especially cities are also the main catalysts of economic growth in developing countries, they can also be unhealthy, inefficient, and inequitable places to live. Most developing countries are increasingly unable to provide basic environmental infrastructure and services, whether in the megacities or in secondary urban centers. Of particular concern is the strain on natural resources brought by the increasing number of people, cars, and factories. They are generating ever greater amounts of urban wastes and emissions. They also exceed the capacity of regulatory authorities to control them and of nature to assimilate them. The environmental consequences are translated into direct negative impacts on human health, the quality of life, the productivity of the city, and the surrounding ecosystems. Environmental degradation threatens the long tenn availability and quality of natural resources critical to economic growth. Cities, with their higher and growing per capita energy use for domestic, industrial, and transport purpose also contribute a disproportionate share of the emission leading to global warming and acid rain. An important priority is to develop strategic approaches for managing the urban environment. The design of appropriate and lasting strategic responses requires first an understanding of the underlying causes of urban environmental deterioration, it is necessary that longer tenn objectives should be set for urban area to avoid irreversible ecological damage and to ensure lasting economic development. As a means to the preventive policies against the adverse effect, environmental impact assessment (EIA) serve to identify a project's possible environmental consequences early enough to allow their being taken into consideration in the decision making process for urban planning. This paper describes some considerations of EIA for urban planning-scoping, assessment process, measurement and prediction of impacts, pollution controls and supervision, and system planning for environmental preservation.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.61-68
• /
• 1981

There are three types in frequency response accelerometer; one is lightly damped piezp type, another is oil damping stainguage type and the third is electro induction type accelerometer within electromagnetic damping. The usable frequency range of lightly damped accelerometers is limited to 0.2 of their mounted natural frequency for amplitude distortion of less than 5 percents. There have been situation where the measured motion contains unforeseen high - frequency components, which are regarded as such due to the accelerometer transfer function. There are several way to overcome amplitude distortion of the higher than anticipated frequency components; (I) to make use of the accelerometer with natural frequency three times and more as high as the measured frequency, (II) to establish data-analysis techniques which will account for the amplitude distortion, (III) to set up a notch filter circuit which has a transfer function that is the reciprocal of the accelerometer transfer function, and so on. This paper makes a report of the method as to(III), i. e., set up a few notch filter circuits, it is discussed what happens when the transfer functions, are in discord as to natural frequency of the filter and accelerometer damping vs. filter damping. And especially as for the cantilever strain gauge type accelerometer made by oneself with ease, it was compared and discussed between the ideological value and the experimental value of actual designed circuit in case of the mismatching of the transfer functions, and it was considered whether to be practicable or not, the result of which was as following; the useful frequency range of the accelerometer can be extended to near resonance if (a) the accelerometer mounted natural frequency and the filter center frequency are matched within .+-. 2 percent and (b) the damping ratios are matched within two factors. Therefore, we obtained the good result in improvement for extending frequency response characteristics of accelerometer.

• Microbiology and Biotechnology Letters
• /
• v.46 no.2
• /
• pp.162-170
• /
• 2018

Non-typhoidal Salmonella is one of the main pathogens causing food-borne illness in humans, with up to 20% of cases resulting from consumption of pork products. Over the gastroenteritis signs, multidrug resistant Salmonella has arisen. In this study, pan-susceptible phenotypic strains of Salmonella enterica serotype Weltevreden recovered from pig production chain in Chiang Mai, Thailand during 2012-2014 were chosen for analysis. The aim of this study was to use whole genome sequencing (WGS) data with an emphasis on antimicrobial resistance gene investigation to assess their pathogenic potential and genetic diversity determination based on whole genome Multilocus Sequence Typing (wgMLST) to expand epidemiological knowledge and to provide additional guidance for disease control. Analyis using ResFinder 3.0 for WGS database tracing found that one of pan-susceptible phenotypic strain carried five classes of resistance genes: aminoglycoside, beta-lactam, phenicol, sulfonamide, and tetracycline associated genes. Twenty four and 36 loci differences were detected by core genome Multilocus Sequence Typing (cgMLST) and pan genome Multilocus Sequence Typing (pgMLST), respectively, in two matching strains (44/13 vs A543057 and A543056 vs 204/13) initially assigned by conventional MLST and Pulsed-field Gel Electrophoresis (PFGE). One hundread percent discriminant ability can be achieved using the wgMLST technique. WGS is currently the ultimate molecular technique for various in-depth studies. As the findings stated above, a new of "gold standard typing method era" for routine works in genome study is being set.

• Journal of the Korean Home Economics Association
• /
• v.18 no.2
• /
• pp.63-68
• /
• 1980

In a rapidly changing Korean society, the role of home economics in ideological education and practical professionalism is faced to be reset. In this article the author reviews home economics and career opportunities. the following issues were discussed in detail : 1. Home Economics and Occupation ; a) As professionals in the field of home economics, job applicants must carry their message in person to potential employers. Employers must be taught that persons with home economics degrees have the capabilities and qualifications to fill a variety of positions. b) In may of 1977, Vocational Education Coalition was established by American Home economics association (AHEA), American Vocational Association, and Home Economics Education association This coalition defined the vocational education as occupation of homemaking and paid employment in home economics occupations for women and men. 2. Home Economics in business: Twelve percent of the total membership of the AHEA is affiliated with the home economics in business section. A professional management consultant, Dr. strain's viewpoint and corning Glass Work's case about business value in the home economics were summarized; a) Why a business employs a home economist. b) Why a business does not employ a home economist. c) Enhancing the home economist's value. d) Home economist's roles in corning Glass works. 3. Creating a Career: a) Mrs. Maineri's story. b) Family financial counselors. c) Home economist and displaced homemaker. d) Job opportunities in international services. Since the role of home economics in Korea has had little perception in professionalism, the following issues require immediate and serious attention to enhance career opportunities for home economists: Employers and government's recognition of home economist's value, Home economist's attitude to enhance their value, Fair employment and sex discrimination, Curricula adjustment, and Support from women's organization for employment opportunities, fair treatment, top jobs, etc.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.23-30
• /
• 1973

Wistar strain male rats were divided into four different diet groups and the control group was fed on 7-percent casein diet (C), the second with a mixture of 80% of rice and 20% of buckwheat (RW), the third with rice only (R), and the fourth with a mixture of rice and buckwheat of equal nitrogen level (RWS). Each diet group consisted of 6 rats was fed for three weeks by the ad libitum feeding method. The results of the experiment, i.e., the growth gain and change in the level of free amino acids in the plasma and liver determined by the micro-bioassay method were as follows. 1. The group C showed the largest growth gain and the rest did in the order of RW group, R group. and RWS group. 2. Rats fed on diet of high protein score showed high level of free amino acids tryptophan, lysine, and threonine in the plasma and liver except for the case of lysine in the liver. 3. Protein score would be estimated by the level of free amino acids in the liver and plasma.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.308-314
• /
• 2011

Efficient transformation and regeneration methods are a priority for successful application of genetic engineering to vegetative propagated plants such as grape. In this study, methods for Agrobacterium tumefaciens-mediated transformation and plant regeneration of grapevine (Vitis vinifera) were evaluated. Tamnara, Heukgoosul, Heukbosek, Rizamat were co-cultivated with Agrobacterium strains, LBA4404 containing the vector pBI121 carrying with CaMV 35S promoter, GUS gene as reporter gene and resistance to kanamycin as selective agent. Seven percent of the maximum regeneration frequency was obtained from co-cultivated with explants from Rizamat with LBA4404 strain on selection medium with kanamycin. The addition of acetosyringone, 200 ${\mu}m$ in virulence induction step was a key factor for successful GUS reporter gene expression in grapevine transformation. Transgenic plants showed resistance to kanamycin and the GUS positive response in leaf ($T_0$) stem ($T_0$) and petiole ($T_0$).

• KCI Concrete Journal
• /
• v.13 no.1
• /
• pp.43-51
• /
• 2001

Although portland cement concrete is one of the most universal construction materials, it has some disadvantage such as shrinkage, which is an inherent characteristic. Because of this shrinkage, combined with the low tensile strength of the material, cracks of varying sizes can be found in every reinforced concrete. To prevent this cracking, keeping the concrete in compression by mechanical prestress has been used. This study discusses application of expansive additives for concrete to improve the serviceability of precast concrete box culvert by inducing chemical prestress. For this purpose, both expansive concrete slabs and normal concrete slabs are tested to verify the effect of expansive additives. Then the failure tests of the fullscale precast box culverts were carried out and the critical aspects of the structural behavior were investigated. The result of the material testis shows that the optimal proportion of expansive additives is 13 percent of cement weight, and the properties of expansive concrete are the same as those of normal concrete in that proportion. Both the experimental cracking load and service load of the expansive concrete members are increased in comparison with those of the normal concrete, but the ultimate load is decreased slightly. In addition to the above results, the deformation of expansive concrete member is lets than that of normal concrete member, and permanent strain which results from cyclic load is decreased. It can be concluded that the use of expansive additives to induce chemical prestress in precast concrete box culvert greatly improves the serviceability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.657-664
• /
• 1997

432 Babcock ISA white leghorn pullets reared for 8 weeks on a standard managemental conditions were exposed to feed/nutrient and light restrictions from 9 to 20 weeks of age. Four feeding regimes i. e. 100, 85 or 70 percent of the recommended allowance and low energy (2,500 Kcal/kg) low protein (13% CP) ration were fed each in the three light regimes i. e. (A) Natural day light starting from 13.24 hr/day at 8 weeks of age and ending 10.41 hr/day at the end of 20 weeks; (B) Constant 11 hr/day light and (C) starting with 13 hr/day at 8 weeks and decreasing @ 20 min/week till 20 weeks of age. At the age of 20 weeks all the birds were shifted to separate cages under uniform lighting feeding and management. During the 21st week light was increased to 12 hr a day and thereafter with an increase of 30 min per week, increased to 16 hr a day at the age of 29 weeks. From 20 weeks onward till 72 week age, all the birds were offered commercial layer rations ad libitum, prepared according to climatic conditions. The results of the study revealed that birds reared under natural and constant light had higher weights than decreasing light, yet they could not out perform during production period. The effect of feed and nutrient restriction, on the other hand, was found significant during rearing as well as production period. The birds exposed to higher level of feed and those exposed to nutrient restriction were lighter in weight. The 100% fed birds laid their first egg at an early age. However, those reared on 85% of the recommendation excelled all other groups in terms of produced number of eggs, egg mass, hen housed and hen day production and net returns.