• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.26-33
• /
• 2010

This paper presents a multi-channel capacitive touch sensing unit for SoC applications. This unit includes a simple common processing unit and switch array to detect the touch sensing input by capacitive-time(C-T) conversion method. This touch sensor ASIC is designed based on the Capacitive-Time(C-T) conversion method to have advantages of small current and chip area, and the minimum resolution of the unit is 41 fF per count with the built-in sensing oscillator, LDO regulator and $I^2C$ for no additional external components. This unit is implemented in 0.18 um CMOS process with dual supply voltage of 1.8 V and 3.3 V. The total power consumption of the unit is 60 uA and the area is 0.26 $mm^2$.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.231-236
• /
• 2004

Crop productivity would be determined by relative capacity of source and sink. The study was carried out to measure the effects of shading and flower bud pinching on growth and yield of Atractylodes japonica Koidz. Shading treatment after transplanting was done at 100%, 65, 45 or 25% level of natural light intensity but the pinching treatment was to remove all the inflorescences formed after June 10, July 10, August 10 or none. Growth and yield at early and late stages were periodically measured. At the early stage, shading mainly influenced fresh weight rather than morphological characters. At the late stage, however, severer shading decreased numbers of stems, leaves, roots, fraction and total fresh weight. 65% shading from July 1 to September 30 after skipped the emerging and early growth stages showed nearly same growth and morphological characters but more rhizome yield per unit area than non-shading. In flower bud pinching treatment, earlier pinching increased number of roots, fraction fresh weights per plant and rhizome yield per unit area.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.207-213
• /
• 2015

It is estimated that there is a total of approximately 100,000 species in Korea. However, the number is currently about 30,000 and only 16,027 species are listed in the 'Species Korea' (as of December, 2014). Of the listed species, 51 species are designated as the Endangered Species Class I while 195 species are in the Class II, totaling 246 endangered species including 20 mammals. Under the circumstances that development (e.g., roads) is increasingly threatening the persistence of endangered mammals, it is significant to identify and preserve suitable habitats for them. In this context, evaluating the values of the suitable habitat environment would serve as essential information for development decision making. This study estimated the values of endangered mammals' forest habitats through spatialization of habitat services. In doing so, a species distribution model, Maximum Entropy Model (MaxEnt) was utilized for a group of endangered mammals including, mountain goat, wildcat, marten cat, and flying squirrel. To calculate the values per unit area, a benefit transfer method was used based on the point-estimate technique with the best available values estimated previously. The range of discount rate of 3.0 to 5.5 percent was applied taking the notion of social discount rate into account. As a result, the province with the highest values for endangered mammal habitats appeared to be Gangwon, followed by Gyeongbuk and Gyeongnam. The monetary values of the endangered mammal habitats were estimated to be 330 billion to 421 billion won per year.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.114-123
• /
• 2009

To investigate the possible use of plants for landscaping in reclaimed soil, a planting pilot system experiment was performed over the course of four years in reclaimed dredging area with four species: Alnus firma, Alnus hirsuta, Pinus thunbergii, and Pyrachantha angustifolia for 4 years. The physicochemical characteristics of the tested soil showed that it was sandy through coming from a reclaimed dredging area. The average pH of the tested soil was 7.16(slight alkali), and electric conductivity(EC) was relatively low, $294{\mu}S/cm$, even though it came from a saltwater area. To test the effect of planting density vs. phytomass by plant specie from a planting basin, the experiment was designed using four plant species with high and low planting densities over 4 years. The planting conditions of the growth of landscape tree species exhibited growth height as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia, whill the DBH followed the order of A. hirsuta, A. firma, and P. thunbergii. The total phytomass of each plant was higher at low density planting areas than high density planting area in terms of total phytomass production and growth distribution in the reclaimed dredging area. Total phytomass per unit area increased as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia. The total phytomass per each tested plant was 2 times higher in low density planting areas than high density planting areas. Total phytomass per unit area, however, was similar or slighty higher in high density planting areas compared to low density areas. Among the tested plants, A. hirsuta showed the highest phytomass, implying that A. hirsuta adapted very well to the reclaimed area and has the capability of a fast growth, nitrogen fixation tree, and utilizing insoluble nutrients through inoculated root nodule bacteria. The yield of phytomass per individual in low density Alnus species was greater than that of the high density. However, those per unit areas had no difference in the density-dependent planting. The ratio of belowground to aboveground was $0.21{\sim}0.26$. Thus, it could be concluded that the Alnus species are potential candidates for ornamental tree species in reclaimed dredging areas. This study offers baseline data for the use of ornamental tree species in reclaimed dredging areas. Additional research is required for different ornamental species in order to increase phytomass of a planting conditions based on reclaimed dredging areas.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.700-714
• /
• 2015

The characteristic of the water quality and pollutant discharge was analyzed at the units watershed of the total amount management in Han-river basin, and after classified in a similar area by multivariate statistical analysis, the main trend such as the water quality trend and pollutant discharge characteristic were analyzed. As a result of this study, the density of the pollutant at the unit watershed is not necessarily identified as discharge density, and the primary management watershed and targeted substances were analyzed depending on the operating status of the environmental infrastructure in watershed and the main pollution factor and discharge path per pollutants. As a result of cluster analysis, watersheds were classified into four groups according to discharge characteristics. It will be used when selecting target area of primary management that is appropriate to the characteristics of each river and establishing efficient water quality improvement plans.

• Plant Resources
• /
• v.4 no.1
• /
• pp.31-35
• /
• 2001

Major characteristics of new Waesungri maize inbred line has multi-tiller and ears: five to six tillers and seven to eight ears per plant and flowering date of Waesungri was delayed about 18 and 24 days compared to Mo17 U.S line and IK$_4$ Korean local lines, respectively. Number of ears, fresh and dry weight per plant were significantly different among all tested hybrids including Waesungri/Sinkihong hybrid under different planting times and densities. Especially, both fresh and dry weight of IK$_1$/FR140//Waesungri F$_1$hybrid were significantly higher at high planting density. In kernel weight per unit area, Wnesungri/Sinkihong hybrid was high at high density and IK$_1$/FR140//Waesungri hybrid was high at low planting density. As results of analysis of variance, flowering date was shown a significantly different both planting times and varieties, while other characters including stem height were shown very variable in interactions with enviromental factors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.175-181
• /
• 1982

This experiment was carried out to study the influence of the various soil water regimes on photosynthesis and growth and development of ginseng plant (3 years). The results were as follows: optimum soil water content for root dry weight and diameter appeared to be 62% of field capacity (13.9% fresh weight basis). The 62% field capacity showed superiority in leaf area, leaf dry weight and also in number of flower, fruit, seed per plant. Net photosynthesis rates per unit area increased with increasing soil water content but net photosynthesis rates per plant were superior in 62% field capacity. Rates of transpiration increased linearly with increasing soil water content but density of stomata decreased with increasing soil water content.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1611-1617
• /
• 2015

This paper presents an effective approach for establishing countermeasures against voltage sags based on the concept of area of severity. In order to apply preventive measures against faults such as lightning arrester, overhead earth wires and so on, it is important to find optimal points for installing the preventive measures. The optimal points can be determined by the calculation of the area of severity(AOS) to voltage sags and the expected sag frequency per unit length of line. In this paper, an effective method to find optimal points to apply countermeasures against voltage sags is addressed with case studies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.193-202
• /
• 2017

This study was carried out in 2014 and 2015 to investigate the effect of transplanting density on panicle production and to analyze the relationship of panicle production with yield traits in the mid-maturing quality rice cultivar 'Haiami' in the mid-plain area of Korea. Number of tillers per square meter increased by reducing planting distance and increasing seedling number per hill. These effects were maintained until maturity and were reflected in the final number of panicles per square meter, although the effect of planting density decreased as rice growth progressed. However, increased panicle number per square meter following dense planting did not improve head rice yield. Panicle number per square meter was negatively associated with spikelet number per panicle and was not correlated with other yield components or head rice yield. Head rice yield was not correlated with head rice percentage but was closely and positively correlated with milled rice yield. Milled rice yield did not increase with grain filling percentage but increased with spikelet number per square meter. Spikelet number per square meter increased with both spikelet number per panicle and panicle number per square meter, although the former had a greater influence. Therefore, we conclude that head rice yield of the 'Haiami' cultivar grown in the mid-plain area of Korea is not improved with an increased panicle number following high planting density but it could be improved with high milled rice yield by increasing spikelet number per unit area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.476-486
• /
• 2010

Fishing efficiency of a trawl vessel can be enhanced by increasing the swept area per unit time, which can be attained either by increasing the mouth size of the net, or by increasing the towing speed. To improve fishing and fuel efficiency of trawl vessels targeting fishes of greater mobility, in which the towing speed is more critical in determining fishing efficiency, we conducted a series of model tests to evaluate the performance of the newly-designed nozzle propeller before installing it in a trawl vessel to verify its towing speed and fuel efficiency in the sea. By conducting further model tests in the experimental basin, we redesigned the propeller of stern trawler to improve the resistance and propulsion performance. Through actual fishing operations, we evaluated the improvement in fuel and fishing efficiency by installing the new nozzle propeller. The trawling speed increased by 0.6kts at the same engine power (RPM), while the engine margin increased by more than 20%. The increased towing speed by installing the redesigned propeller is expected to enhance fishing performance through increasing the number of hauling- and casting operations per unit times, while shortening the towing duration. Analysis of the Catch-Per-Unit-Effort (CPUE) data indicated that the mean CPUE of trawl fishery increased from 3.04kg/m in year 2007 to 6.15kg/m in year 2008, confirming enhanced fishing efficiency by adopting the redesigned propeller.