• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.47-54
• /
• 1988

The growth characteristics and yield per unit area of two cultivation systems of forage, corn (Zea mays L.) monoculture and corn-cowpea (Vigna sinesis King) inter-cropping were compared and obtained follow results. 1. The two cultivation systems were not significantly different in leaf length, leaf width and length of internode with harvesting time. 2. The weight of stalk and leaves of a plant were decreased with maturity, while weight of ear was markedly increased. The patterns of relative ratio of each components was essentially same in each cultivation system. In corn monocrop., the percentages of stalk, leaf and ear at final harvesting stage were 22.9, 13.7 and 63.4, respectively. 3. Dry matter yield per unit area (33kgIlOa) of intercropped corn at yellow stage was similar to that of monocropped corn ( l,482.8kg/ 10a vs 1 ,SO8.9kg/ 10a). At ripe stage, however, the DM yield of intercrop. was higher than that of monocrop. (1,810.4kg/lOa vs 1,660.4 kg/ 1 Oa). 4. The same pattern was observed in organic matter yield.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• Korean Journal of Ichthyology
• /
• v.23 no.3
• /
• pp.206-216
• /
• 2011

To investigate seasonal and yearly variation of fishes composition in Yeoja Bay of Korea, fisheries survey were carried out using beam trawl from 2006 to 2009. A total of 44 fish species were collected. The major dominant species were Pennahia argentatus, Thryssa adelae, Thryssa kammalensis and Cynoglossus joyneri, which were occupied over 63% total individuals, and 50% of wet weight. The diversity index (H') was about 1.62 (1.46~1.77) by seasons, and seasons of similarity by fishes were divided into two groups, which were March with December and June with September. ANOVA test showed that there were not significant difference between individuals and catch weight (kg) per unit area (km$^2$) by year and season, except for catch weight per unit area by season.

• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.109-115
• /
• 2017

The aim of this study is to investigate the effect of physical properties of fuels on spray characteristics in the gasoline direct injection system. Injection rate, spray visualization, and spray pattern experiments were performed to analyze the spray characteristics of ethanol, gasoline, and ethanol/gasoline blends. We measured injection rate of each fuel via the Bosch method. The spray visualization experiment was also carried out at atmospheric pressure using a high-speed camera. Finally, the average of drop surface area per unit volume was measured using the optical patternator. The experimental results from Bosch method showed that peak injection rate increased when the volume fraction of ethanol increased. In addition, higher viscosity of ethanol than that of gasoline leads to longer injection delay. At the initial injection region before reaching 0.8 ms, the spray tip penetration becomes longer as increasing the volume fraction of ethanol, but reversely shorter after 0.8 ms. It was found that ethanol makes spray angle become larger. The surface area per unit volume of the drop was decreased as the distance from the injection tip or the concentration of the gasoline increased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.158-164
• /
• 1988

The growth characteristics and yield per unit area of two cropping systems, corn monoculture and 'wrnsoybean intercropping, were compared and the obtained results were as follows; 1.The two cultivation systems were not significantly different in leaf length, leaf width and length of internode at harvesting time. 2.The weight of stalk and the leaves of a plant were decreased with maturity, while the weight of ear was markedly increased. The patterns of relative ratio of each components were essentialy same in each cultivation systems. In corn monoculture, the percentages of stalk, leaf, and ear at final harvesting stage were 22.9, 13.7, and 63.4 and in corn-soybean intercropping, they were 21.8, 10.9, and 67.3 respectively. 3.Dry matter yield per unit area (kg/lOa) of intercropped corn at yellow stage was similar to that of monocultured corn (1, 483 kg/ 10a vs 1, 509 kg/ 10a). At ripe stage, however, the dry matter yield of intercropped plant was more than that of monocultured (1, 679 vs 1, 660 kg/ 10a). 4.The same pattern was observed in organic matter yield.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.127-140
• /
• 1985

A comparative anatomy between the secondary xylem in the root and stem of Korean Betulaceae, including 5 genera and 6 species, was carried out in this study. Anatomical characteristics of the secondary xylem in the root and stem are as follows: Diameter of vessel and fiber is wider in the root than the stem, while the number of vessel and fiber per unit area is fewer in the root than the stem. The length of vessel element is longer in the stem than the root, whereas length of the fiber is longer in the root than the stem. Number of bar in the perforation plate is more in the stem than the root, and the angle of perforation plate is broader in the root than the stem. Number of ray per unit area is more in the root than the stem.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.5
• /
• pp.246-254
• /
• 2022

The high-temperature oxidation behavior of Cr-Mo steel AISI 4115 in air at different temperatures (600, 850, 950℃) for 120 min was studied by mass gain analysis, phase analysis (optical microscopy, electron probe micro-analysis, x-ray diffraction) and hardness measurement of each iron oxide-phase. The oxidation scales that formed on oxidation process consisted outer layer (Hematite), middle layer (Magnetite) and the inner layer (Chromite). In the case of 850 and 950℃, the oxidation mass gain per unit area of AISI 4115 steel increased according to the logarithmic rate as atmospheric pressure increased. Especially, It has been observed that with an increase in the atmospheric pressure at 600℃, the oxidation mass gain per unit area changed from a linear to logarithmic relationship.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.133-134
• /
• 2020

The equation of end bearing capacity is applied differently depending on the type of pile, construction method, and load characteristics considering the construction standards. The bearing capacity equation of the design standard is presented in various ways according to the design conditions such as construction method and ground condition, etc. but, It does not reflect the ground strength according to the SPT-N value of weathered rock. This study analyzed the trend of allowable tip bearing capacity by pile diameter through about 480 dynamic loading tests conducted for the construction/quality management of piles for the last 6 years since 2015. The equation for the ultimate end bearing capacity per unit area according to the SPT-N value is presented. The proposed formula of ultimate end bearing capacity per unit area can be applied in the range of 15,000kN/m2 to 30,000kN/m2. The proposed formula, which complements the existing formula, enables pile design and construction/quality management.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.145-158
• /
• 2005

To clarify the growth of Phragmites communis along the distance from the land, and investigate the effects by cutting the aboveground part, the height and dry weight of this species were surveyed from 2000 to 2001 on natural stands at tidal-flat of Hogog-ri, Jugog-myeon, Whaseong-city, Gyeonggi Province. At the stand near the rice paddy, mean density, mean height, dry weight per plant and dry weight per unit area of P. communis were $122.67plants/m^2$, 100.36 cm, 4.241 g, and $537.574/m^2$, respectively. The sizes of P. communis conspicuously increased from seaside to land side. At the stand isolated from the land, these properties were $102.30plants/m^2$ (in density), 43.894 cm (in height), 0.779 g/plant and $73.495g/m^2$, respectively, and the sizes of P. communis at the land side were relatively similar to those at sea side. The cutting of aboveground part resulted to the decrease of density and dry weight per unit area in next year, but did not influence on the height and weight per plant of P. communis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.3-3
• /
• 1995

Plastic IC encapsulation utilizing lead on chip(LOC) die attach technique allows higher device density per unit package area, and faster current speed and easter leadframe design. Nevertheless, since the top surface of the chip is directly attached to the area of the leadframe with a double-sided adhesive tape in the LOC package, it tends to be easily damaged by the leadframe, leading to limitation in its utilization. In this work, it is detailed how the damage of the chip surface occurs, and it is influenced and improved by the LOC construct.