• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.15-21
• /
• 1991

A wireless acoustic emission (AE) system has been developed for continuous monitoring of rotating structures such as turbine rotors. The cable between preamplifier and signal processing unit of a conventional AE system was replaced by the frequency modulated telemetry. The detected signals were modulated and transmitted as an RF signals by the transmitting module, then received and demodulated by the receiving module. The distance between the transmitting and the receiving antennas could be separated up to 10cm within a reasonable signal-to-noise ratio. The simulated AE signals generated by pencil lead breaks from rotating structures were successfully detected using the developed wireless AE monitoring system.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.57-64
• /
• 2004

This study deals with the prediction of defect location which can be occurred in structure. The existing methods was very difficult to be applied to predict it, because of complex numerical formula. The triangulation method proposed in this study can predict the source location easily with small amount of data. The arrival time of wave can be directly converted into the distance between sensors. For this purpose, the propagation velocity was measured by Rayleigh wave, and the propagation behavior was analyzed. The welded workpiece is adapted to investigate for the consideration of jointed part in structure, The propagation velocity of signal was measured in welded workpiece and the revised algorithm of source location was proposed.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.65-69
• /
• 2010

High energy electron beams were to concentrically dose inside a tumor and more energy is a shape decreased of dose. Therefore, it is useful to radiation therapy of a tumor. Also high energy electron beams ionized into collision with a atom in structure material of tissue and it has big changes to dose distribution by multiple scattering. The study had to establish characteristic of electron beams from interaction of electron beams and materials. Experiment method was to measure dependence of electron beam central axis for depth dose curve, field flatness and symmetry and field size dependence. The results were able to evaluate data for a datum pint of electron beam. Also radiotherapy has to be considered for not only energy pencil of lines but characteristic, electron guide and isodose curves distribution.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.265-270
• /
• 2001

Nowadays, like any other areas we have asked that the concrete would get more and more properties to increase there performance. So, in this research we are intended to develop the Photocatalytic Concrete which is one of the High Performance Concrete with waste gas reduction and self-cleaning. The fundamental phenomena of the Photocatalytic Concrete were observed by the residue water-weight, SEM, flow and surface hardness(Pencil tester). As a result of this study, the Photocatalytic Concrete used Photocatalytic powder, OPC admixture and other materials can obtain its properties, also photocatalytic efficiency. Last of all, we are convinced of the Photocatalytic Concrete possibility and make an effort to develop its properties added a various study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.575-580
• /
• 2002

The most recent, like any other field we have requested that the concrete would increase more a performance. So, in this research we are intended to study on the property of Photocatalytic Concrete which is one of the High Performance Concrete. The fundamental phenomena of the Photocatalytic Concrete were observed by the NOx Analyzer, Bonding strength, SEM, Flow and Surface hardness(Pencil tester). As a result of this study, the Photocatalytic Concrete used Photocatalytic powder, admixture and other materials can obtain its properties, also photocatalytic efficiency(NOx reduction). Also, we have convinced of the Photocatalytic Concrete possibility and put on a spurt to improve its properties added a various experiment.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.39-43
• /
• 2001

본 논문에서는 자동차용 부품인 커넥팅 로드를 제작할 수 있는 금형제작시 생산성 향상을 위해서 CAD/CAM 시스템을 적용하였다. 사용된 CAD 소프트웨어는 MDT4.0. CAM 소프트웨어는 Z-MASTER이며 생성된 NC코드는 CNC 밀링머신에 전송되어 커렉팅 로드 금형을 자동가공 한다.

• 산업공학
• /
• 제14권3호
• /
• pp.302-309
• /
• 2001

Direction-of-motion stereotypes between ON/OFF controls were tested using a paper-and-pencil test and interview method. One hundred and forty eight subjects of both genders and from a wide range of ages were asked to indicate the control movement they would make to turn on the light. Stereotypes were obtained for nine types of ON/OFF controls in two different planes. The results show that stereotype for left-right power switches is right for on, and stereotype for up-down switches is up. And, a strong stereotype was found in the case of left-right switches than up-down switches. Some stereotypes are significantly different between genders and age groups. These findings identified in this study can be used to design the ON/OFF switches of the facilities and equipments.

• 비파괴검사학회지
• /
• 제3권2호
• /
• pp.5-12
• /
• 1984

The purpose of this paper is to decide volume of crack by AE source wave analysis. The material studied in this paper was Titanium Alloy. Transient wave memory has 50 nano sampling time. The response function of specimens and transducer was obtained experimentally by use of specimens and transducer was obtained experimentally by use of breaking pencil lead as a reference simulated AE source, and the source waves were dertermined in terms of energy release-time functions explicitly through a time domain deconvolution. From experimental results, we can determine size of cracked volume.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.187-193
• /
• 1998

In the tandom pencil slat saw lines, feeding of cedar blocks is often stopped because excessive motor current is required in a saw machine. These events are called "kickoffs' in factory lines. Kickoffs decrease productivity due to machine down-time and damage to saw blades often accompanies them. Researches on saw behavior at kickoff are required to understand and reduce the frequency and severity of kickoff events. This research aims at understanding the fundamental mechanisms of kickoffs during cutting, predicting the impending kickoff and evolving design improvements for high cutting performance with fewer and less severe kickoffs.offs.

• 대한수학교육학회지:수학교육학연구
• /
• 제10권2호
• /
• pp.279-300
• /
• 2000

This research investigated students' interaction in the environment with dynamic geometry software such as Cabri II, and GSP in order to understand and analyze why computer environment is a richer interaction field for developing children's explorative ability than other traditional paper-and-pencil environments. This research focused on 5th graders' interaction with topics of transformational geometry and similar figure and analyzed children's learning process and their interview results gotten through audio and video recording. Computer exploration with a dynamic software seems to be very helpful for elementary students to learn geometry. However, the effectiveness of the computer should be discussed with respected to its methodological validity of teachers to guide students' explorative activities with a dynamic software.