• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2822-2827
• /
• 2008

Among the main components of PEM fuel cell, the functions of GDL are to transport reactants from the channel to the catalyst and remove reaction products from the catalyst and transport heat from the catalyst to the channels in the flow filed plate. Permeability of GDL is known to make it possible to enhance the gas transport through GDL, devoting to get better performance. In this paper, three dimensional numerical simulation of the fuel cell by the permeability of GDL is presented by using a FLUENT modified to include the electrochemical behavior. Results show that as permeability is higher than $10^{-12}m^2$, gradients of temperature distribution, oxygen molar concentration and current density distribution in MEA were decreased. Although heat generation was increased as high permeability, MEA's temperature was lower than the low permeability of GDL. This seems because that convection was higher affects in mass and heat transfer process than diffusion as permeability of GDL is increases.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.55.2-55.2
• /
• 2009

A polymer electrolyte membrane (PEM) fuel cell has been getting large interest as a typical issue in useful applications. The PEMFC is composed of a membrane, catalyst and the bipolar plate. SnOx:F films on SUS316 stainless steel were prepared as a function of substrate with using electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD) in order to achieve the corrosion-resistant and low contact resistance bipolar plates for PEM fuel cells. The SnOx:F films coated on SUS316 substrate at surface plasma treatment for excellent stability, before/after heat treatment for good crystalline structure and microwave power for were characterized by X-ray diffraction (XRD), auger electron microscopy (AES) and field emission-scanning electron microscopy (FE-SEM). The SnOx:F film coated on SUS316 substrate with various process parameters were able to observe optimum interfacial contact resistance (ICR) and corrosion resistance. It can be concluded that fluorine-doping content plays an important function in electrical property and characteristic of corrosion-protective film.

• Macromolecular Research
• /
• 제16권4호
• /
• pp.373-378
• /
• 2008

A simple chemical fixation method for the fabrication of layer-by-layer (LbL) polyelectrolyte multilayer (PEM) has been developed to create a large area, highly uniform film for various applications. PEM of weak poly-electrolytes, i.e., polyallylamine hydrogen chloride (PAH) and poly(acrylic acid)(PAA), was assembled on polymer substrates such as poly(methyl methacrylate)(PMMA) and polycarbonate (PC). In the case of a weak polyelectrolyte, the fabricated thin film thickness of the polyelectrolyte multilayers was strongly dependent on the pH of the processing solution, which enabled the film thickness or optical properties to be controlled. On the other hand, the environmental stability for device application was poor. In this study, we utilized the chemical fixation method using glutaraldehyde (GA)-amine reaction in order to stabilize the polyelectrolyte multilayers. By simple treatment of GA on the PEM film, the inherent morphology was fixed and the adhesion and mechanical strength were improved. Both surface tension and FT-IR measurements supported the chemical cross-linking reaction. The surface property of the polyelectrolyte films was altered and converted from hydrophilic to hydrophobic by chemical modification. The possible application to antireflection coating on PMMA and PC was demonstrated.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.51-60
• /
• 2014

To find a practical application approach of polyelectrolyte multilayering (PEM) on inorganic filler, we introduced PEM process without washing step and investigated the effect of shear condition on the washless PEM treatment of ground calcium carbonate (GCC). Washless multilayering on GCC was conducted under various shear conditions such as stirring, homogenization, and ultrasonication. Highly charged polyelectrolytes combination of polydiallyldimethylammonium chloride (PDADMAC) and poly sodium 4-styrene sulfonate (PSS) and low charged polyelectrolytes combination with cationic starch and anionic polyacrylamide (PAM) were compared. In the case of highly charged polyelectrolytes combination, shear conditions did not affect the zeta potential and the particle size of treated GCC. However, the modified GCC particles with low charged polyelectrolytes were more dispersed under higher shear condition while maintaining the zeta potential. In addition, GCC was successfully modified through laboratory inline washless polyelectrolyte multilayering system which consists of homogenizers and pumps.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.67-72
• /
• 2006

Blower as an air supply system is one of the most important BOP (Balance of Plant) system fur FCV(Fuel Cell Vehicle). For generating and blowing compressed air, the motor of air blower consumes maximum 25% of net power and fuel cell demands a clean air. Considering the efficiency of whole FCV, low friction lubrication of high speed rotor is needed. For the purpose of reducing electrical power and supplying clean air to Fuel cell, oil-free air foil bearings are applied at the each side of brushless motor (BLDC) as journal bearings which diameter is 50mm. The normal power of driving motor has 1.7kW with the 30,000rpm operating range and the flow rate of air has maximum 160 SCFM. The impeller of blower was adopted a mixed type of centrifugal and axial which has several advantages for variable operating condition. The performance of turbo-blower and parameters of air foil bearings was investigated analytically and experimentally. From this study, the performance of the blower was confirmed to be suitable far 80kw PEM FC.

• Advances in Energy Research
• /
• 제8권4호
• /
• pp.203-211
• /
• 2022

The aim of this paper is to analyze the performance of commercial fuel cell (rated capacity 1000W) with the help of resistive load and output power variation with change in H₂ flow rate and calculate the maximum power point (MPP) of the proton exchange membrane (PEM) while changing AC and DC load respectively. The factors influencing the output power of a fuel cell are hydrogen flow rate, cell temperature, and membrane water content. The results show that when the H₂ flow rate is changed from 11, 13, and 15 Lpm, MPP is increased from lower to higher flow rate. The power of the fuel cell is increased at the rate of 29% by increasing the flow rate from 11 to 15 lpm. This study will allow small-scale industries and residential buildings (in remote or inaccessible areas) to characterize the performance of PEMFC. Furthermore, fuel cell helps in reducing emission in the environment compared to fossil fuels. Also, fuel cells are ecofriendly as well as cost effective and can be the best alternative way to convert energy.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.13-21
• /
• 2016

본 논문은 현재 진행 중인 대한민국 남부지역에 위치한 대학 내 스마트에너지캠퍼스 마이크로그리드에서 대학 내 빌딩에 설치될 수소전기분해 이용 연료전지 시스템 운용을 위한 선행 연구로써 고분자전해질막 전기분해(PEMWE)과 고분자전해질막 연료전지(PEMFC) 장치에서 동시에 온도변화 효과를 연구하고자 한다. 전반적으로 실험실에서 50W 고분자전해질막 연료전지(PEMFC)을 사용하여 수행하였다. 모니터링 프로세스는 무선 로라 노드와 게이트웨이 네트워크를 구성하여 실행하였다. 그리고 PEMWE와 PEMFC에 대한 수학적 모델링과 운전 알고리즘을 제안하였으며 제안한 모델에서 PEMWE는 낮은 발열 기준에서 효율이 더 높음을, 반면에 PEMFC는 높은 발열기준에서 효율이 더 높음을 을 알 수 있었다. 향후 대학 구내 빌딩에 설치될 실증시스템 성능을 높이기 위해 PEMWE와 PEMFC의 온도와 압력을 모니터링, 통신 및 제어 등 연구개발을 통하여 구현할 예정이다.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.953-958
• /
• 2008

The object of this study was to investigate the immune-enhancing effects of Chlorella vulgaris (CV) on a deteriorated immune function by a protein-energy malnutrition (PEM) diet. Unicellular algae, CV were used as a biological response modifier. Male C57BL/6J mice were fed for 15 days with standard diet or a PEM diet, which is associated with decreased host immune defense. After 8 days, mice in the PEM diet group were orally administered by 0.05, 0.1, and 0.15 g/kg body weight of CV or distilled water. Nutritional parameters, and interferon (IFN)-$\gamma$ levels were significantly increased in the blood serum of the CV (0.15 g/kg)-treated group (29.6$\pm$2.8 pg/mL) compared to the non-treated PEM group (4.1$\pm$0.4 pg/mL, p<0.05). In addition, cell proliferation and production of cytokines were investigated via a CV (0.01, 0.1, and 1 mg/mL) treatment using a human T cell line MOLT-4 cell. The CV treatment (1 mg/mL) significantly increased the production of both IFN-$\gamma$ and interleukin (IL)-2 (51.3$\pm$3.4 and 285.9$\pm$18.8 pg/mL, respectively) compared to the control (51.3$\pm$3.4 and 442.6$\pm$14.3 pg/mL, respectively), but did not affect the production of IL-4. These results suggest that CV may be useful in improving the immune function.

• 한국축산식품학회지
• /
• 제24권2호
• /
• pp.146-150
• /
• 2004

돈육에서 추출한 염용성 단백질과 유화물로 제조한 결착제를 이용하여 재구성 삼겹살과 재구성 베이컨을 제조하고, 재구성육간의 물리적인 특성과 관능적 특성을 조사하였다. 재구성 베이컨과 삼겹살 간의 육색을 비교한 결과, 명도값(L$^{*}$ )은 재구성 삼겹살이 유의적으로(p＜0.05) 가장 높게 나타났고, 냉장육과 냉동육으로 만든 베이컨간에는 유의적인 차이가 없었다. 또한 적색도를 나타내는 a$^{*}$ 와 황색도를 나타내는 b$^{*}$ 역시 재구성 삼겹살이 유의적으로(p<0.05) 높게 나타났으며, 냉장과 냉동육으로 제조한 재구성육간에는 적색도와 황색도에 있어 유의적인 차이를 나타내지 않았다 재구성 삼겹살과 재구성 베이컨간의 보수력 비교에서는 재구성 베이컨의 보수력이 유의적으로(p＜0.05) 높게 나타났으며, 그중에서도 냉동원료육으로 만든 재구성 베이컨의 보수력이 가장 높게 나타났다(p＜0.05). 재구성 베이컨의 인장강도가 재구성 삼겹살의 인장강도에 비해 유의적으로(p＜0.05) 높게 나타났다. 또한 원료육의 상태에 따른 재구성 베이컨간의 비교에서는 냉장육으로 제조한 재구성 베이컨의 인장강도가 냉동원료육으로 만든 재구성 베이컨에 비해 유의적으로(p＜0.05)높은 인장강도값을 나타내었다. 재구성 베이컨과 삼겹살간의 관능검사 결과, 육색은 재구성 삼겹살과 냉장육으로 제조한 재구성 베이컨이 냉동육으로 제조한 재구성육에 비해 유의적으로(p＜0.05) 높은 육색을 나타내었다 다즙성과 탄력성은 재구성 삼겹이 재구성 베이컨에 비교해 유의적으로(p＜0.05) 높게 나타났으나 연도는 재구성 베이컨이 유의적으로 (p＜0.05)높게 나타났다. 전체적인 기호도를 보면 재구성 삼겹살이 재구성 베이컨에 비해 유의적으로(p＜0.05)높게 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.18-25
• /
• 2008

The membrane electrode assembly(MEA) was prepared by a nonequilibrium impregnation- reduction (I-R) method. Nafion 117 and covalently cross-linked sulfonated polyetherether with tungsto- phosphoric acid (CL-SPEEK/TPA30) prepared by our laboratory, were chosen as polymer electrolyte membrane(PEM). $Pt(NH_3)_4Cl_2$, $RuCl_3$ and reducing agent $(NaBH_4)$ were used as electrocatalytic materials. Electrochemical activity surface area(ESA) and specific surface area(SSA) of Pt cathodic electrode with Nafion 117 were $22.48m^2/g$ and $23.50m^2/g$ respectively under the condition of 0.8 M $NaBH_4$. But Pt electrode prepared by CL-SPEEK/TPA30 membrane exhibited higher ESA $23.46m^2/g$ than that of Nafion 117. In case of Pt-Ru anodic electrode, the higher concentration of Ru was, the lower potential of oxygen reduction and region of hydrogen desorption was, and Pt-Ru electrode using 10 mM $RuCl_3$ showed best properties of SSA $34.09m^2/g$ with Nafion 117. In water electrolysis performance, the cell voltage of Pt/PEM/Pt-Ru MEA with Nafion 117 showed cell property of 1.75 V at $1A/cm^2$ and $80{\circ}C$. On the same condition, the cell voltage with CL-SPEEK/TPA30 was the best of 1.73 V at $1A/cm^2$.