• Korean Journal of Ecology and Environment
• /
• v.55 no.1
• /
• pp.19-34
• /
• 2022

This study was identified the distribution of vegetation in domestic estuaries and analysed the relationship with environmental fcators based on the health assessment data of the estuary ecosystem surveyed between 2016 and 2018. Of the 325 estuaries surveyed, 187 vegetation communites were investigated in 300 estuaries and 53 halophyte communites accounted for 28.3%. No vegetation distribution was found in the other 25 estuaries. Considering the circulation of estuary, 41 halophyte communites were investigated in open estuaries and 26 halophyte communites in closed estuaries. As a result of canonical correlation analysis (CCA) between the entire distributed vegetation community and environmental factors, salinity (conductivity), T-N, and T-P concentrations were strongly correlated. Among the riverbed material materials of the estuary, the composition ratio of silt, sand, and pebble was the most correlated. Therefor, it is estimated that the distribution location of the halophyte communites were differentiated by being influenced by the sea ares, estuary circulation type, resistance to salinity and riverbed material ratio.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.383-395
• /
• 2020

The stratigraphical position of the Haengmae Formation can provide clues towards solving the hot issue on the Silurian formation, also known as Hoedongri Formation. Since the 2010s, there have been several reports denying the Haengmae Formation as a lithostratigraphic unit. This study aimed to clarify the lithostratigraphic and chronostratigraphic significance of the Haengmae Formation. The distribution and structural geometry of the Haengmae Formation were studied through geologic mapping, and the correlation of relative geologic age and the absolute age was performed through conodont biostratigraphy and zircon U-Pb dating respectively. The representative rock of the Haengmae Formation is massive and yellow-yellowish brown pebble-bearing carbonate rocks with a granular texture similar to sandstone. Its surface is rough with a considerable amount of pores. By studying the mineral composition, contents, and microstructure of the rocks, they have been classified as pebble-bearing clastic rocks composed of dolomite pebbles and matrix. They chiefly comprise of euhedral or subhedral dolomite, and rounded, well-sorted fine-grained quartz, which are continuously distributed in the study area from Biryong-dong to Pyeongan-ri. Bedding attitude and the thickness of the Haengmae Formation are similar to that of the Hoedongri Formation in the north-eastern area (Biryong-dong to Haengmae-dong). The dip-direction attitudes were maintained 340°/15° from Biryong-dong to Haengmae-dong with a thickness of ca. 200 m. However, around the southwest of the studied area, the attitude is suddenly changed and the stratigraphic sequence is in disorder because of fold and thrust. Consequently, the formation is exposed to a wide low-relief area of 1.5 km × 2.5 km. Zircon U-Pb age dating results ranged from 470 to 449 Ma, which indicates that the Haengmae Formation formed during the Upper Ordovician or later. The pebble-bearing carbonate rock consisted of clastic sediments, suggesting that the Middle Ordovician conodonts from the Haengmae Formation must be reworked. Therefore, the above-stated evidence supports that the geologic age of the Haengmae Formation should be Upper Ordovician or later. This study revealed that the Haengmae Formation is neither shear zone, nor an upper part of the Jeongseon Limestone, and is also not the same age as the Jeongseon Limestone. Furthermore, it was confirmed that the Haengmae Formation should be considered a unit of lithostratigraphy in accordance with the stratigraphic guide of the International Commission on Stratigraphy (ICS).

• Korean Journal of Ecology and Environment
• /
• v.54 no.1
• /
• pp.24-38
• /
• 2021

Microhabitat In the upper stream is created by various environment variables such as the bottom substrate and the physicochemical factors, and may influence the distribution of benthic macroinvertebrates. We investigated the bottom substrate and environmental variables influencing the distribution of benthic macroinvertebrate in 26 stream-type waterways established at upper reaches of Geum River. During study period, total 85 families, 160 species, 9305 individuals of benthic macroinvertebrates were recorded. The stream-type waterways, where the bottom substrates consist mainly of pebble (16~64 mm) and cobble (64~256 mm) or with rapid water velocity (more than 0.2 m/s) and high dissolved oxygen (more than 120%), were supported by high species diversity of benthic macroinvertebrate. Hierological cluster analysis and the nonparametric multidimensional scale (NMDS) divided 26 stream-type waterways into a total of three clusters. In Cluster 1, the invertebrate species, such as Branchiura sowerbyi, Cloeon dipterum, Ischnura asiatica, Paracercion calamorum, and Radix auricularia, closely related to aquatic macrophytes, and Chironomidae spp., Limnodrilus gotoi, and Tanypodinae sp. were abundant in waterways, with high coverage of silt and clay as well as high turbidity and total nitrogen. The benthic macroinvertebrate species (Cheumatopsyche brevilineata, Drunella ishiyamana, Dugesia japonica, Ephemera orientalis, Gumaga KUa, Macrostemum radiatum, Potamanthus formosus, Semisulcospira libertine, Stenelmis vulgaris, and Teloganopsis punctisetae) included in Cluster 2 were dominated in sites with high cover rates of pebble and gravel. Cluster 3 was predominantly covered by the Cobbles, was supported by Simulium sp. Such a clear distinction in the study sites means that each stream-type waterways is governed by a clear habitat environment. In the case of some sites with low species diversity, improvement measures are required to restore nature, such as improving the function of inflows and outflows, creating meandering channel, and inducing the settlement of littoral vegetation.

• Journal of the Speleological Society of Korea
• /
• no.64
• /
• pp.49-59
• /
• 2004

This study area that is big Lake by Pauldang-Dam on 1973 that is together North Han-River, South Han-River, and GyaungAn-River. So, Lake flow slow, have many deposit-silt, sand, Pebble etc. Large Land is submerge. in result, Lacustrin wetland became. Water sources are precipitation, river, aquifer. But this wetland is made by dam's water control plan.

• Solar Energy
• /
• v.12 no.1
• /
• pp.34-39
• /
• 1992

The present study has carried out thermal performance evaluation of air systems for space heating in Daejeon by the f-chart method. The various effects with the change in air flow rate, number of glazings, storage capacity of pebble bed, and coating materials of absorber plate are analyzed with regard to the effectiveness of air systems for space heating. A comparison is also made with liquid systems under the same operating conditions.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.197-208
• /
• 2000

ABS sensor ring has been manufactured by powder metallurgy (P/M) method using 400 series ferrite stainless steel. The results are following. It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result mechanical characteristics of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to constant velocity joint(C/V), and has a good hardness properties endurable to sand and pebble impact. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.59-69
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. the results are as following : It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable In sand and pebble impact.

• Earthquakes and Structures
• /
• v.19 no.2
• /
• pp.103-117
• /
• 2020

The effect of the foundation size on the efficiency of seismic base isolation using a layer of stone pebbles is experimentally investigated. Four scaled models of buildings with different stiffnesses (from very stiff to soft) were tested, each with the so-called small and large foundation, and exposed to four different accelerograms (different predominant periods and durations). Tests were conducted so that the strains in the model remained elastic and afterwards the models were tested until collapse. Each model was tested for the case of the foundation being supported on a rigid base and on an aseismic layer. Compared to the smaller foundation, the larger foundation results in a reduced rocking effect, higher earthquake forces and lower bearing capacity of the tested models, with respectable efficiency (reduced strain/stress, displacement and increase of the ultimate bearing capacity of the model) for the considered seismic base isolation compared to the foundation on a rigid base.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.674-680
• /
• 2020

We used MCNP6 computer code to model HTR-10 core reactor. We used two types of fuel; UO₂ and (Th+Pu)O₂ mixture. We determined the critical height at which the reactor approached criticality in both two cases. The neutronic and burnup parameters were investigated. The results indicated that the core fueled with mixed (Th+Pu)O₂, achieved about 24% higher fuel cycle length than the UO₂ case. It also enhanced safeguard security by burning Pu isotopes. The results were compared with previously published papers and good agreements were found.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.752-759
• /
• 2006

Conglomerates and core-stones are the typical composite geomaterials that are composed of a weak matrix and a strong pebble part. In general, we couldn't analyze the composite geomaterials by using emperical rock classification methods. In the study, a series of analyses of elastic behavior of composite geomaterials are carried out by using homogenization theory. 45-case models are made with considering 3 kind of factors such as gravel content, size and strength of matrix. Those are applicable to various composite geomaterials of conglomerates and core-stones. The size of analysis model is large enough to exceed REV.