• 생태와환경
• /
• 제41권1호
• /
• pp.43-53
• /
• 2008

본 연구의 목적은 분포형 수문모형인 TOPMODEL을 이용하여 산림유역의 홍수수문곡선을 추정하는 것이다. 이를 위하여 유역면적 58.3ha의 명성유역을 선정하였으며, 대상유역에 대하여 강우량과 유출량을 측정하였다. Monte Carlo기법을 이용하여 강우사상별로 최적의 매개 변수 조합을 구하고, 매개변수별 모의기간에 대한 평균값을 적용하여 매개변수를 결정하였다. 1997년에 측정된 6개의 강우-유출량 자료를 이용하여 매개변수 보정을 실시하였으며, $1998\sim1999$년에 측정된 8개의 강우-유출량 자료를 이용하여 모형의 검증을 실시하였다. 보정기간에 대한 유출량 추정 오차는 $-2.74\sim1.81%$의 범위를 보였으며, 모형 효율(E)은 평균 0.92이었다. 6개의 강우사상에 대하여 실측된 평균 첨두유량은 $0.324m^3\;s^{-1}$이었으며, 이에 대한 추정치는 $0.295m^3\;s^{-1}$로 모의되었다. 강우 사상별 첨두유량의 오차범위는 $-27.65\sim-1.13%$로 나타났으며, 이는 강우특성 및 선행강우조건에 영향을 받은 것으로 판단된다. 검증기간에 대하여 각 강우사상별 모형효율(E)의 평균값은 0.92로 나타났다. 첨두유량의 실측값은 평균적으로 $0.087m^3\;s^{-1}$이었으며, 추정된 첨두유량의 평균은 $0.090m^3\;s^{-1}$로 나타났다. 첨두시간은 보정기간에 대하여는 관측값과 모의값의 평균이 각각 18.3 hrs와 11.0 hrs이었으며, 검증기간에 대하여는 각각 16.6hrs와 13.5 hrs이었다.

• The Korean Journal of Physiology
• /
• 제2권2호
• /
• pp.53-61
• /
• 1968

Maximal oxygen debt, lactate and excess lactate were measured in 13 men with low hematocrit ratio before and after maximal exercise. Maximal exercise run was performed on a treadmill and the duration of run was 2 minutes 45 seconds in each subject. Hematocrit ratio ranged between 35 and 47%, the mean being 39.8%. The following results were obtained. 1. Maximal oxygen debt expressed on basis of body weight increased as the hematocrit ratio decreased. The correlation coefficient between the two was r= -0.770. 2. The time necessary for decreasing to 50% of total maximal $O_2$ debt(half time) became longer as the hematocrit ratio decreased. In normal men the half time was about 4 minutes and at the longest it was 12 minutes in men with the lowest hematocrit ratio. 3. The lactate concentration reached its peak value after 3 minutes of recovery. Thereafter, the time course of decrease in lactate concentration coincided roughly with that of respiratory oxygen debt curve. To reach to the resting level, however, it took longer time than that of respiratory oxygen debt. 4. Resting concentrations of lactate was 1.28 mM/l, pyruvate 0.13 mM/l and L/P ratio was 9.8. Peak value of ${\Delta}L$ after exercise reached to the value of 10.4 mM/l and ${\Delta}L/P$ reached 26.0. Peak excess lactate after exercise was 6.34 mM/l. 5. The part of oxygen debt accounted for by the oxygen equivalent of excess lactate was only 38.4%. A better relationship between lactate and oxygen debt was observed and the part of oxygen debt accounted for by the oxygen equivalent of lactate was 63.3%. 6. Peak value of lactate after maximal exercise increased as the hematocrit ratio decreased. 7. Respiratory oxygen debt of 100 ml/kg was accounted for by lactate more than 60% and only 30% was by excess lactate. 8. Excess lactate was not a good index of respiratory oxygen debt.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.310-319
• /
• 1997

A finite element analysis of a trunnion pipe anchor is presented. The structure is analyzed for the case of internal pressure and moment loadings. The stress results are categorized into the average (membrane) stress, the linearly varying (bending) stress and the peak stress through the thickness. The resulting stresses are interpreted per Section III of the ASME Boiler and Pressure Vessel Code from which the Primary(B$_1$), Secondary(C$_1$) and Peak(K$_1$) stress indices for pressure, the Primary (B$_2$), Secondary(C$_2$) and Peak(K$_2$) stress indices for moment are developed. Based on the comparison between stress value by stress indices derived in this paper and stress value represented by the ASME Code Case N-391-1, the empirical equations for stress indices are effectively used in the piping stress analysis. Therefore, the use of empirical equations can simplify the procedure of evaluating the local stress in the piping design stage.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1013-1018
• /
• 1996

The annealing effects of Au/Te/Au/n-GaAs structure was investigated by using x-ray diffraction, scanning electron microscope, the specific contact resistance and I-V measurement. Increasing the annealing temperature, the intensity of Au-Ga peak by X-ray diffraction was increased. The Ga$\_$2/Te$\_$3/peak got evident for the samples annealed at 400.deg. C and GaAs peak by recrystallization appeared for the samples annealed at 500.deg. C. The variation from the schottky to low resistance contact was confirmed by I-V curve. The lowest value of the specific contact resistance of the samples annealed at 500.deg. C was 3.8*10$\^$-5/.ohm.-cm$\^$2/ but the value increased above 600.deg. C.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.29-34
• /
• 1999

A two-dimensional Navier-Stokes code based on AUSMPW+ scheme has been developed to simulate the hypersonic flowfield of hypersonic shock-shock interaction. AUSMPW+ scheme is a new hybrid flux splitting scheme, which is improved by introducing pressure-based weight functions to eliminate the typical drawbacks of AUSM-type schemes, such as non-monotone pressure solutions. To study the real gas effects, three different gas models are taken into account in this paper: perfect gas, equilibrium flow and nonequilibrium flow. It has been investigated how each gas model influences on the peak surface loading, such as wall pressure and wall heat transfer, and unsteady flowfield structure in the region of shock-shock interaction. With the results, the value of peak pressure is not sensitive to the real gas effects nor to the wall catalyticity. However, the value of peak heat transfer rates is affected by the real gas effects and the wall catalyticity. The structure of the flowfield also changes drastically in the presence of real gas effects.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.576-580
• /
• 2013

In this paper, we investigate the capacity of a multipoint-to-point cognitive radio network. In existing works, the asymptotic capacity is only obtained in the high peak power region at secondary transmitter (ST) or obtained without considering the interference from primary transmitter (PT) for easy analysis. Here, we analyze the asymptotic capacity by considering an arbitrary peak power at the ST and the interference from the PT based on extreme value theory. Simulation results show that our approximated capacity is well-matched to the exact capacity. Furthermore, the scaling law of our capacity is found to be double logarithm of the number of secondary users.

• 정보학연구
• /
• 제8권3호
• /
• pp.51-56
• /
• 2005

In this paper, we describe a study on the relationship between spectral sensitization and photographic characteristics of color paper. The photographic emulsion used in this study is a green-sensitizing emulsion. U.V maximum absorption peak value of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt was observed 507nm, and wedge spectrograms maximum peak value of color paper added dye to photographic emulsion was shown 553nm. As compared with the absorption peak of the dye in methanol solution, the sensitizing peaks of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt have red shifts of 46nm. The photographic characteristics of green-sensitizing emulsion were obtained contrast(2.6), speed(48-57), fog(0.08). Therefore, benzoxazolo carbocyanine dye is of industrial importance as green-sensitizing dye in the spectral sensitization of photographic emulsion.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.79-86
• /
• 2018

Unlike other types of outdoor advertisements, rooftop signboards are installed on the roofs of buildings, rather than on their outer walls. This means that the area of a rooftop signboard is commonly larger than that of a general outdoor signboard. Moreover, as such signboards are greatly influenced by the wind, they can suffer a lot of damage from typhoons and strong winds every year. However, there is no wind load specification for rooftop signboards. In this study, wind pressure experiments were conducted to investigate the peak wind pressure on each side of rooftop signboards installed on the roofs of 5-15 story buildings in a city center. The minimum peak wind pressure coefficient was -3.0 at the bottom edges of the front and back of the rooftop signboards and -2.0 along the entire length of the sides. As the height of the rooftop signboard increased with the increasing height of the buildings, the peak value was found to be larger than the absolute peak value for the minimum peak wind pressure coefficient. The maximum and minimum peak wind pressure distributions of the rooftop outdoor signboards were influenced by the position of the signboard and the wind angle.

• 한국조리학회지
• /
• 제22권2호
• /
• pp.78-92
• /
• 2016

본 연구는 바나나 첨가에 따른 식빵의 품질 특성을 알아보고자 하였다. 반죽의 mixograph와 stickiness, 발효율, TPA, 비용적, 영상분석, 색도, 수분함량, 기호도 검사를 통하여 분석하였다. Mixograph의 peak time(min)는 모든 시료가 4~5분을 나타냈지만, peak value(%)의 경우 CON, B10, B20 시료가 60% 이상, B30, B40이 60% 이하를 나타냈다. Stickiness 측정결과, 바나나 첨가량이 늘어나면서 점착력이 낮아짐을 알 수 있었다. 발효율은 전반적으로 증가하였으나, B40 시료의 경우 75분 이후에는 감소하는 경향을 보였다. 껍질과 속질의 색도 측정결과, 명도 L값은 CON이 가장 높았고, 적색도 a값은 B40이 가장 높았으며, 황색도 b값 역시 B40이 가장 높았다. pH 측정 결과, B40이 가장 낮은 수치를 보였고, 바나나 첨가량이 많을수록 pH가 낮아지는 경향을 보였다. 바나나 첨가가 제품의 부피와 비용적에는 부정적인 영향을 끼치는 것을 알 수 있었으며, crumbScan을 통한 영상분석 결과, 껍질두께, 기공의 찌그러짐에서 유의한 차이는 나타나지 않았다. 반면, 기공의 조밀도에서는 CON의 값이 774.33으로 가장 낮았으며, B40의 값이 927.66으로 가장 높게 나타났다. Hardness는 유의한 차이를 보이며 B40이 가장 낮았고, 대조구가 가장 높았다. 수분함량은 전체적으로 유의한 차이가 있었고, CON의 값이 가장 높았으며, 바나나 첨가량이 늘어남에 따라서 그 값이 줄어드는 것을 확인할 수 있다. 관능검사 중 기호도 검사 결과, B20이 가장 높은 평가를 받았고, B40은 전체적 기호도에서 가장 좋지 않게 나타났다. 특성차이 검사결과, 바나나 첨가량이 부피를 크게 하는데 부정적인 영향을 끼친다는 것을 확인할 수 있었다. 전반적인 품질특성 결과와 관능검사 결과에 따르면, 바나나를 20% 첨가하는 것이 품질과 기호도 측면에서 최적이라 사료된다.

• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.547-556
• /
• 2020

An understanding of the influence of MR (Magmatic Rock) thickness on the surrounding rock behaviors is essential for the prevention and management of dynamic disasters in coal mining. In this study, we used FLC3D to study the breaking and instability laws of surrounding rock with different MR thicknesses in terms of strata movement, stress and energy. The mechanism of dynamic disasters was revealed. The results show that the thicker the MR is, (1) the smaller the subsidence of the overlying strata is, but the subsidence span of the overlying strata become wider, and the corresponding displacement deformation value of the basin edge become smaller. (2) the slower the growth rate of abutment pressure in front of the working face is, but the peak value is smaller, and the influence range is larger. The peak value decreases rapidly after the breaking, and the stress concentration coefficient is maintained at about 1.31. (3) the slower the peak energy in front of coal wall, but the range of energy concentration increases (isoline "O" type energy circle). Finally, a case study was conducted to verify the disaster-causing mechanism. We anticipate that the research findings presented herein can assist in the control of dynamic hazards.